Not able to stop Data supplier bridge

Hi,
After upgrading to SP 15 of XI3.0, we are not able to stop Data
Supplier Bridge in http://Host:50000/sld --> Administration --> Data
Supplier Bridge.
We have upgraded all components to SP15 and there is no problem with
that. Please help me with this.
Regards

Hi Kiran,
Have a look at the following thread.
Data Supplier Bridge won't start in URL
Rgds,
Sam Raju

Similar Messages

SLD Data Supplier Bridge

I am not able to start SLD Data Supplier Bridge.
Any help appreciated.

Have you restarted your j2ee engine using transaction smicm at all in the ABAP stack ?
Administration - j2ee - restart - yes
Please wait about 10 minutes for the java components to come back to live.
Message was edited by: James Ibbotson

Not able to stop batch session

Hii,
I have placed one session on error only mode.
it has been running for last 5 hrs.I am not able to stop the session.
Even after loging out of the system it still shows active session.when i tried to kill the session but it is not allowing me to kill the session.instead one more session is getting created.i am able to kill that session also.
its very urgent pls help.
Regards,
Viren.

see if this part of sap-help helps you!
Deleting Sessions
Use
Normally, batch input sessions are deleted from the session list automatically when they are completed. However, sessions remain in the list if any of the following is true:
They were generated with the KEEP option.
They contain errors or were aborted with the /bend OK code. (Such a session is deleted when you finish processing it, unless it was generated with the KEEP option.)
When you no longer need sessions that have been held in the list, you can explicitly delete them.
Do not delete any sessions that contain unprocessed transactions. You must first correct and process such transactions or enter the data in the transactions into the R/3 System in some other way.
Prerequisites
Start the batch input management tool: Select System ® Service ® Batch input ® Sessions. Alternate: Enter transaction SM35. Both paths take you to the session overview of the batch input system.
Procedure
To delete a session from the session queue, mark the sessions to be deleted and choose Delete from the tool bar. The system asks you to confirm the deletion. It also asks you if the session log should be deleted together with the session.
Message was edited by: Bapujee Naidu

Not able to View data in .CSV file

Hi,
I am using some java script to display data conditionall, for color coding purpose but when i try to download the data to an spread sheet i am not able to do that please suggest me how to export fix this bug
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCLthen
''|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || ''
else
''|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || ''
end "Effort"
from actuals Z
If i try to extract actuals it shows blank not able to extract data please suggest me how to fix this issue.
Thanks
Sudhir

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Not Able To View Data in Web Service Model

Hi ,
 I m trying to view a table using web service model.
 When i write the same code for binding it to context , i m able to view its data.
 But not so while using Web Service Model(not adaptive web service model).
 The code is:
 Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT object1 =new Request_ZMANAGE_MAKT_ZMANAGE_ZMAKT();
 wdContext.nodeRequest_ZMANAGE_MAKT_ZMANAGE_ZMAKT().bind(object1);
 object1.setResponse(new Response_ZMANAGE_MAKT_ZMANAGE_ZMAKT());
CAn anybody plz solve my problem.
Thanks..
Regards,
Ankita

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to access data in Query

Hi,
I have loaded data using DTP from 2 different source systems.
One is 3.x emulated datasource and the other is New 7.0 datasource.I have loaded data sucessfully in to DSO.Built a query on same.
But when iam executing the query by material as selection criteria.Iam not able to found data in query from one source system.The same data is available in DSO.Please needed in this regard.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

Not able to save data in pa30 action infotype in production

Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors   TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
    Termination occurred in the ABAP program "SAPLRHAS"   in "FILL_STRU_TURBO"
    The main program was "MP000000 ".
    In the source code you have the terminated point in line 759
    of the (Include) program "LRHASF00".
Thanks and regards,
Tarun

Hi,
     Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
    otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
    error found out.
Regrads,
Tarun

Not able pass the data from component to other component.

Hello All
I am not able pass the data from component to other component.
I have done like this.
1 Main Component (Parent component ) having below two child components.Embeded as used components.
2)     Search Component and Details Component
3)     In the Search Component having buttons, Say : Button u201CXu201D on click of button I am navigating to Details component view through FPM.
4)     When I am clicking above button u201CXu201D raising the event to call the parent   business logic method, there I am getting Structure with values and binded this structure to the node and Mapped this node to the Details component interface node. FYI : I kept the debugging point Structure is having data , I had set static attributes table to node instance.
5)     In the Details component node data is not coming mean empty.
Thanks in Advance.
Br-
CW
Edited by: CarlinWilliams on Jul 4, 2011 9:21 AM

Hi,
When you use input Ext. check that the parent component should not be used as used component in child component.
Only in the parent component the child components should be used as used components and the usage has to be created for the
Child Components and the binding of the Node should be done from comp. controller of parent component to child node
by which you will be able to see double arrow against the node.This should work
Thanks,
Shailaja Ainala.

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Not able insert ,query data from forms

hi,
I am not able to insert data or query data from forms(10g devsuite).getting error frm-40505,frm 40508 .i am able to insert and select record from sql plus.the block ihave created is control block .it is connected to the table using the properties.
should i do anything to insert record.please help

the block ihave created is control block .it is connected to the table using the properties.A Control Block, by definition, is a non-database block. This means the block is not directly connected to a table so you have to manually display data in the block and any DML you want to perform on data in this block you must do manually as well.
There are four database objects you can base your database block on; 1) a Table, 2) a View, 3) From Clause Query (basically an In-line View), and 4) a database stored procedure. I recommend you use one of these four methods rather than manually display your data.
Craig...

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
 bwkey type werks_d,
 matnr type matnr,
 lgort type LGORT_D,
 budat type budat,
 labst type labst,
 endmenge type p decimals 3,
 end of w_tab.
 DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any . " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
 record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
 wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
 output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

Not able to query data from View

Hi,
I am not able to fetch data from views even while running simple select statements. I am using SQL Developer Version 3.0.04,
Same query is fetching data on other computers running SQL Developer or Toad.
Has anyone faced this issue??

Is that the first version ever you installed? You unzipped in a clean directory, right?
What OS/JDK/DB versions?
So do you get an error or what?
K.

Not able to stop Data supplier bridge

Similar Messages

Maybe you are looking for