Not able to stop the Load.
Hi All,
I have scheduled job in Background for 2LIS_02_ITM as Init. for reason i have deleted the request in Cube. When i checked in SM37 job is already finished. But still it is showing running. I want to stop it as early possible. Please can anybody help me in this?
Regards,
Rajesh
Hi,
Go to SM37 t-code >Give the Job name >execute> in the next screen ie second screen.........double click on the job >> Click on the Details tab from there copy the Work process id and the Application server name.
Now go to sm50 /SM51 t-code select Work Process Id and the application server> select Process > Cancel without core.
some times if you will not have authorization to cancel the job. Moreover as you said sometimes you cannot see the back ground job in this case take BASIS guys help.
Hope it helps
Edited by: Aduri on Dec 15, 2008 12:45 PM
Similar Messages
-
Was not able to stop the listener
Hi All,
As a part of shut down I stopped the application tier and Database and Then when I was trying to stop Listener I was getting the below error.
LSNRCTL> show log_file
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I couldn't find where I was going wrong.. Can anyone help me out in this.Hi Helios,
Here is the output of the listener status
[oracle@oracleerp PROD_oracleerp]$ ps -ef|grep inherit
oracle 4831 4080 0 11:19 pts/1 00:00:00 grep inherit
And these are the entries in /etc/hosts file
[oracle@oracleerp PROD_oracleerp]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
192.168.0.113 oracleerp.localdomain.com oracleerp
127.0.0.1 localhost.localdomain localhost
And Service Network Restart -- I already tried
[oracle@oracleerp PROD_oracleerp]$ service network restart
Shutting down loopback interface: Users cannot control this device.
[FAILED]
rm: cannot remove `/var/lock/subsys/network': Permission denied
Setting network parameters: error: permission denied on key 'net.ipv4.ip_forward'
error: permission denied on key 'net.ipv4.conf.default.rp_filter'
error: permission denied on key 'net.ipv4.conf.default.accept_source_route'
error: permission denied on key 'kernel.sysrq'
error: permission denied on key 'kernel.core_uses_pid'
error: permission denied on key 'kernel.shmall'
error: permission denied on key 'kernel.shmmax'
error: permission denied on key 'kernel.shmmni'
error: permission denied on key 'kernel.sem'
error: permission denied on key 'fs.file-max'
error: permission denied on key 'net.ipv4.ip_local_port_range'
error: permission denied on key 'net.core.rmem_default'
error: permission denied on key 'net.core.wmem_default'
error: permission denied on key 'net.core.rmem_max'
error: permission denied on key 'net.core.wmem_max'
[FAILED]
Bringing up loopback interface: Users cannot control this device.
[FAILED]
Bringing up interface eth0: Users cannot control this device.
[FAILED]
touch: cannot touch `/var/lock/subsys/network': Permission denied
But Didnt yet
I had gone through the document you suggesed already.
Please suggest me how i can get this issue fixed. -
Not able to stop batch session
Hii,
I have placed one session on error only mode.
it has been running for last 5 hrs.I am not able to stop the session.
Even after loging out of the system it still shows active session.when i tried to kill the session but it is not allowing me to kill the session.instead one more session is getting created.i am able to kill that session also.
its very urgent pls help.
Regards,
Viren.see if this part of sap-help helps you!
Deleting Sessions
Use
Normally, batch input sessions are deleted from the session list automatically when they are completed. However, sessions remain in the list if any of the following is true:
They were generated with the KEEP option.
They contain errors or were aborted with the /bend OK code. (Such a session is deleted when you finish processing it, unless it was generated with the KEEP option.)
When you no longer need sessions that have been held in the list, you can explicitly delete them.
Do not delete any sessions that contain unprocessed transactions. You must first correct and process such transactions or enter the data in the transactions into the R/3 System in some other way.
Prerequisites
Start the batch input management tool: Select System ® Service ® Batch input ® Sessions. Alternate: Enter transaction SM35. Both paths take you to the session overview of the batch input system.
Procedure
To delete a session from the session queue, mark the sessions to be deleted and choose Delete from the tool bar. The system asks you to confirm the deletion. It also asks you if the session log should be deleted together with the session.
Message was edited by: Bapujee Naidu -
i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.
Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
Workflow - Not able to stop at the breakpoint, how to debug?
Hi,
I am working on solving a workflow problem, but i am not able to stop at the breakpoint put on the function module called through the program.
I am sure that the function module is called through the workflow. please tell me why is it not stopping.
Pls help.
Regards,
Chamandeepmaybe because it is a background method, its then executed by wf-batch.
the easiest way to test/debug a method is doing it with tx swo1, fill in the Business object and test the method with the corresponding input parameters
/Peter -
I am not able to shutdown the database by using stopsap
Dear all,
As mentioned in the subject "I am not able to shutdown the database by using stopsap". I am getting the following errors:
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
0509-150 Dependent module libjox9.a(shr.o) could not be loaded.
0509-022 Cannot load module libjox9.a(shr.o).
0509-026 System error: A file or directory in the path name does not exist
R3 is terminated correctly by using the command stopsap and also I am able to shutdown the database normally by using the SQL command.
Thanks for your cooperation.
MaherThank you Nick for your care.
I will test start/stop manually later; because the system is active and used by the users for testing purpose (not production).
Yes, LIBPATH is the same for both users.
The ownership/permisssion for the both files is
-rwxr-xr-x 1 <SID>adm sapsys stopdb
-rwxr-xr-x 1 <SID>adm sapsys startdb
I compared with production, it seems ok.
I started DBCheck by using the transaction DB13 and also it failed due to same errors.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000272, user name ****)
No application server found on database host
Execute logical command BRCONNECT On host *******
Parameters: -u / -c -f check
BR801I BRCONNECT 6.20 (113)
exec(): 0509-036 Cannot load program oracle<SID>because of the following errors:
#0509-150 Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR805I Start of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.04
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150 Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location db_connect-2
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150 Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location thr_db_connect-4
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
BR806I End of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.07
BR280I Time stamp 2004-08-11 08.27.07
BR804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Do you think that we need to rebuild the Oracle Software ?
Thank in advance for your cooperation.
Maher.
Message was edited by: Maher M. -
I am not able to see the valeus in the report on multiprovider.
Hi Gurus,
I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
But I am not able to see the values for 0DOC_CURRCY in the report.
Why I am not able to see the valeus in the report which is executing on the multiprovider.
PLs help me with a solution.Hi,
First step is to checck the data in the ODS.
Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
If this is checked you 70 % of the job is Over in your creating multiprovider.
For more information
http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
santosh -
Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 03.06.2009 09:46:55
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
"_UPDATE_DIRECTORY_TABLES"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
Regards
venuHi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
75 * Put the fields of PSA to database without check, otherwise error by
76 * activation of table
77
78 IF p_psa_exists EQ rs_c_false OR
79 i_new_version EQ rs_c_true.
>>>>> INSERT rstsodsfield FROM TABLE l_t_odsfield.
81 ELSE.
82 DELETE FROM rstsodsfield
83 WHERE odsname = l_s_odsfield-odsname
84 AND version = l_s_odsfield-version.
85 MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif -
Not able to run the SSIS package in SQL Server Agent Job in SQL 2012
Hi,
I scheduled a job (SQL SERVER AGENT) which will call my SSIS package. This package will execute 5 packages in loop.
When I execute this job I am getting error as below
============================================================
Started : 12:30:19 PM
Error : 2014-01-23 12:30:20.37
Code : 0xC00220EC
Source : Execute Package Task
Description : Error 0x80070005. Failed to create an instance of empty child package.
The Distributed Component Object Model (DCOM) configuration or the installation of SQL Server Integration Services,
may be corrupted on your machine. End Error
Error : 2014-01-23 12:30:20.37
Code : 0xC00220DE
Source : Execute Package Task
Description : Error 0x80070005 while loading package file "D:\SSIS\RetailMobileApp\Staging_Pkg\stg_Category_Master.dtsx". Access is denied.End Error
DTExec : The package execution returned DTSER_FAILURE (1).
Started : 12:30:19 PM
Finished : 12:30:20 PM
Elapsed : 1.123 seconds.
The package execution failed.
The step failed.
============================================================
In the STEPS I have selected as follows:
Type : SQL Server Integration Services Package
Run as: SQL Server Agent Service Account
Package Source: File System
What config I need to check here ? This job is not able to access the package stored in the folder.
SridharThanks for your reply. I had created credentials and used this while creating the Proxy account. With the Proxy account I am able to execute the Job Successfully. Concern here is I used my NT account to create this Proxy. Suppose If I left from the
current project if some one is coming to this project later they need to change the credential with their NT account and run the JOB? Is this right way or we an create any other account in common? If so how?
Sridhar -
Not able to start the weblogic server ....
Hi All,
I am using JDeveloper 11.1.1.6 .
I am not able to start the weblogic server .I am getting below Exception .I am not sure where I need to check,,
Error at line:2333 col:31 '' expected a valid beginning name character
at weblogic.xml.babel.scanner.Name.read(Name.java:33)
at weblogic.xml.babel.scanner.Name.read(Name.java:20)
at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:58)
at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
at weblogic.xml.babel.baseparser.Space.parse(Space.java:19)
at weblogic.xml.babel.baseparser.BaseParser.parseElement(BaseParser.java:474)
at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:326)
at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)
at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctionParameters(StaxPolicyStoreParser.java:2207)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2135)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:276)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:209)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:492)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:276)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2827)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2821)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2821)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Jul 19, 2013 11:11:09 AM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: Cannot read from policy store. Reason is PolicyStore Error, javax.xml.stream.XMLStreamException: Error at line:2333 col:31 '
Thanks ...hi user,
did you check this.
diehn.net/blog &raquo; Blog Archive &raquo; Weblogic AdminServer refused to start &#8211; truncated syste… -
Not able to find the created BI System
Hi,
I have configured the BI System as in the document.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
I am having few doubts.
1. Whether we need to choose only SAP system with load balancing template.
2. Whether we can set
BI Directory Provider: No
BI Master System: No
And also one more thing, I am using UIDPWD logon method. Whether there will any problem with this
I need clarifications on these.
Also after doing all these things i am not able to find the created BI System in VC.
When i test the same in Portal, it is saying the connection is successful..
Anyother step needs to be done, after this in configuration. Please let me know.
Please help me to resolve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 12, 2008 1:41 PMHi Inna,
Thanks for the reply.
But in Portal I have done the User Mapping between Portal Server and BI System.
I am using BI 3.5 System, Whether there will be any problem?
The BI Kit is already installed and i am able to view the components.
Still i am not able to get the System that i have created in portal into VC 7.1.
I am only getting Web Services created in that system and Service Registry and Visual Composer Models in Search Tab.
Whether we need to create a RFC destination also for this BI system?
Please help me to solve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 15, 2008 4:44 PM
Edited by: Palani Appan on Sep 16, 2008 9:42 AM -
I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?
Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy -
Hi,
Not able to stop our Solution Manager system.
Os- AIX 6.1 & database-Oracle 11
Getting this error when trying to stop the instance:
pm2adm> stopsap unxs0275
Checking PM2 Database
Database is running
stopping the SAP instance DVEBMGS10
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
stop of Instance failed
Error log:
pm2adm> pg stopsap_DVEBMGS10.log
Trace of system startup/check of SAP System PM2 on Fri 26 Aug 10:55:50 2011
Called command: /usr/sap/PM2/SYS/exe/run/stopsap stop
10:55:54
stopping the SAP instance DVEBMGS10
10:55:55
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
10:55:57
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
26.08.2011 10:55:57
Stop
FAIL: HTTP error, HTTP/1.1 401 Unauthorized
10:55:59
stop of Instance failed
Can you please suggest?The sapstartsrv is not allowing you to perform the Stop option for instance 10.
The sapstartsrv should create a streamfile in the /tmp/.sapstream5<instance number>13. Check
if this file has the right permition, something like that:
srwx--- 1 <sap>adm sapsys .sapstream51013
To solve the issue you could try:
1. Try restart the sapstartsrv for the instance 10 and check if this will solve the problem.
2. check if the s-bit permission in the program sapuxuserch (note 927637)
3. In the last way you could disable the protect method for sapstartsrv with the instace profile parameter
"service/protectedwebmethods = NONE" and restart the sapstartsrv. This certainly will solve the problem, but I do not recommend it for security aspect.
Before unprotect the web methods you should try to update the sapstartsrv.
Edited by: Clebio Dossa on Aug 27, 2011 12:52 AM -
Not able to stop Resource group
I was not able to bring the resource group to offline.. Since some of resources are in stopping state and hung there. I was not able to either bring the resource to offline nor the resource group.
=============================================
Output of scstat
==============================================
# scstat -g
-- Resource Groups and Resources --
Group Name Resources
Resources: siebelgtwy_m gtwcrm01 siebelgtwy_m_stor siebelgtwy_m_gtwy
Resources: siebelsrvr1_m gtwcrm02 siebelsrvr1_m_stor siebelsrvr1_m_nfs siebelsrvr1_m_srvr
Resources: trillium_m gtwcrm03 trillium_m_stor trillium_m_nfs trillium_m_srvr
Resources: siebelweb_m gtwcrm04 siebelweb_m_stor
-- Resource Groups --
Group Name Node Name State
Group: siebelgtwy_m hspcsuncrm6 Online
Group: siebelgtwy_m hspcsuncrm7 Offline
Group: siebelsrvr1_m hspcsuncrm6 Error--stop failed
Group: siebelsrvr1_m hspcsuncrm7 Offline
Group: trillium_m hspcsuncrm7 Online
Group: trillium_m hspcsuncrm6 Offline
Group: siebelweb_m hspcsuncrm7 Online
Group: siebelweb_m hspcsuncrm6 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: gtwcrm01 hspcsuncrm6 Online Online - LogicalHostname online.
Resource: gtwcrm01 hspcsuncrm7 Offline Offline - LogicalHostname offline.
Resource: siebelgtwy_m_stor hspcsuncrm6 Online Online
Resource: siebelgtwy_m_stor hspcsuncrm7 Offline Offline
Resource: siebelgtwy_m_gtwy hspcsuncrm6 Online Online - Service is online.
Resource: siebelgtwy_m_gtwy hspcsuncrm7 Offline Offline
Resource: gtwcrm02 hspcsuncrm6 Online but not monitored Online - LogicalHostname online.
Resource: gtwcrm02 hspcsuncrm7 Offline Offline - LogicalHostname offline.
Resource: siebelsrvr1_m_stor hspcsuncrm6 Stopping Unknown - Stopping
Resource: siebelsrvr1_m_stor hspcsuncrm7 Offline Offline
Resource: siebelsrvr1_m_nfs hspcsuncrm6 Stopping Unknown - Stopping
Resource: siebelsrvr1_m_nfs hspcsuncrm7 Offline Offline - Completed successfully.
Resource: siebelsrvr1_m_srvr hspcsuncrm6 Offline Offline
Resource: siebelsrvr1_m_srvr hspcsuncrm7 Offline Offline
Resource: gtwcrm03 hspcsuncrm7 Online Online - LogicalHostname online.
Resource: gtwcrm03 hspcsuncrm6 Offline Online - LogicalHostname online.
Resource: trillium_m_stor hspcsuncrm7 Online Online
Resource: trillium_m_stor hspcsuncrm6 Offline Offline
Resource: trillium_m_nfs hspcsuncrm7 Online Online - Service is online.
Resource: trillium_m_nfs hspcsuncrm6 Offline Offline
Resource: trillium_m_srvr hspcsuncrm7 Online Online
Resource: trillium_m_srvr hspcsuncrm6 Offline Offline
Resource: gtwcrm04 hspcsuncrm7 Online Online - LogicalHostname online.
Resource: gtwcrm04 hspcsuncrm6 Offline Offline - LogicalHostname offline.
Resource: siebelweb_m_stor hspcsuncrm7 Online Online
Resource: siebelweb_m_stor hspcsuncrm6 Offline Offline
=======================================
Here resource group "siebelsrvr1_m " ... i need to start it again .. for that i need to bring it offline first and then start it again.
Anyone's help is much apprepicated.
Thanks & Regards
Kumaresh.P.NI guess you set Failover_mode for the siebelsrvr1_m_stor and siebelsrvr1_m_nfs to something else than HARD, because normaly if something like this happens it would have aborted/rebooted node hspcsuncrm6.
You need to clear the Stop_failed flag like described at http://docs.sun.com/app/docs/doc/819-0703/6n343k6h3?a=view
which basicly means:
scswitch -c -h hspcsuncrm6 -j siebelsrvr1_m_nfs -f STOP_FAILED
scswitch -c -h hspcsuncrm6 -j siebelsrvr1_m_stor -f STOP_FAILED
scswitch -F -g siebelsrvr1_m
You then need to make sure that whatever lead to the stop failed problem is resolved, then you can start the RG again:
scswitch -z -g siebelsrvr1_m -h hspcsuncrm6
Btw. if you are seeing the "ping-pong" effect, e.g. the RG failing over between the two nodes failing to start properly, you can try
scswitch -Q -g <rgname that is failing>
if you are at least on SC 3.1U3 or newer.
Hope this helps.
Greets
Thorsten
Maybe you are looking for
-
Mini Display Port to VGA adapter with Mac Pro
Just as a word of advice if you're thinking of buying a new Mac Pro and planning on hooking it up to dual VGA displays at their native resolutions - don't. Apple claim it will support 3 VGA displays. That might be true in a very loose sense but not i
-
Good day, I searched through the forum and cant find anything. I have around 300 published reports on SSRS and we are busy migrating to a new system. They have already setup their tables on the new system and I need to provide them with a list of tab
-
Newbie needs help with multiple devices?
Hi and best wishes to all. I could really use some advice on the following. I purchased an iPhone and set it up on my PC in the normal way. A few months later, my Creative Vision battery died, and Creative's only advice was "buy a new one!". No chanc
-
In the new version of Firefox, when I start typing something to the address bar, instead of showing suggestions from my history, it shows ~3 "popular search strings", as in Google search bar (for example if i type 'a', it shows aol, aol mail and amaz
-
TV Toshiba regza no picture in DTV
Hi I have a Toshiba Tv 32A3032D and failed me a software update, the result is that television is blocked and will not let me access the DTV menu to reset it. Could you give me the files with a firmware version to carry out the recovery of the TV