Not able to type a password when trying to create a domain

Hi,
I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
P.S. I am able to type in Name and description fields.
Kindly advise.
Regards

If anyone else face this issue, then here comes the resolution -
Password Field Not Editable in Domain Template on Linux
Bug: 10394900
Added: 01-May-2011
Platform: Linux
On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
Workaround: Do one of the following:
To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
To fix the issue permanently:
Kill a scim processes. For example, kill "pgrep scim"
Modify (or create) the file ~/.scim/config to include the following line:
/FrontEnd/X11/Dynamic = true (follow case sensitivity)
If you are running VNC, restart the VNC server.
Run the Configuration Wizard again.
Regards,
Anuj

Similar Messages

  • I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

    I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
    I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
    I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
    This connector is detected as a USB 2.0 composite device in System Hardware table.
    Can someone hints or point out a potential cause or to rectify this issue.
    Thanks in Advance.

    Which os version are you using? 
    Which iPod Nano model do you have?  iPod Models 
    iPod not recognized in iTunes and Mac desktop 

  • Why does my iMac now ask for a password when trying to create a folder in Finder?

    Hi guys
    My iMac has started to ask me for my login password when I try and create a new folder using Finder. I concert folders on the desktop and drag to the correct location in Finder and I can also create folders in the tree view of Adobe Bridge both without having to enter a password. Any suggestions?
    Many thanks

    Give this a try:
    Reset User Permissions and ACLs
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    From the Utilities menu select Terminal. At the Terminal prompt enter: resetpassword. Press RETURN. When the window opens select your startup drive where it says "Select the volume containing the user account:" At the bottom of the window you will see, "Reset Home folder permissions and ACLs." Click on the Reset button.

  • Not able to see the Oracle JRF option while creating a domain.

    Hi
    I am new to OSM development. I am trying to create a Oracle JRF domain using Fusion Middleware. In the select source template for the domain creation screen I am not getting the Oracle JRF option. I am using Weblogic 11gR1. May I know the reason why I am not getting this option?
    Rgds
    Sam

    Thanks.
    I downloaded the latest patch from OTN. But when I tried to install it, it threw an error - INST-07010 : Validation of Oracle Home location failed. The location specified does not exist.
    The weblogic version is 10.3.3.
    The error is thrown since in the middleware folder there is no folder called oracle_common. To see what happens if I created this folder (oracle_common) manually, the pack installer returned an message stating that the s/w is upto date and no upgrade is needed. I am still not seeing the template source - Oracle JRF.
    Questions:
    1. How is the folder oracle_common created?
    2. If the s/w is upto date then why I am not seeing the Oracle JRF option while creating the domain?
    Rgds
    Sam
    Edited by: 827861 on Jan 13, 2011 11:58 PM

  • Muse would not accept my business catalyst password when trying to publish

    When i try to publish in Muse, i enter muy business catalyst password and its says it is not correct, i have change it many times and i can enter when i go to business catalyst web page.

    I tried exporting to youtube in iMovie again, because I gave up on that.
    Looks promising.
    What I did here though is add the new google login as the user name.
    Not my user name but the email address google now wants me to use.
    I've also never changed over my user name to my real name in youtube.
    I remain the user name.
    So it looks like a workaround, I would still like to use quicktime though.
    Thanks.

  • NI-VISA 5.1.2 exits/closes right after launching it on a Linux CentOS 6.2 PC, also crashes LabVIEW when trying to create VISA ref constant for VISA Open.

    After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi.  Tried to launch the VISA tools, they all start and then close abruptly.  NI I/O Trace only shows one line.
    I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz).  I did notice a strange message in here about nivisaserver:
    /usr/bin/tail --lines=25 /var/log/messages:
    May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
    May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
    Thanks!
    Solved!
    Go to Solution.
    Attachments:
    system.log.gz ‏621 KB

    MountainMan12 wrote:
    After installing LaBVIEW 2011 and NI-VISA 5.1.2 on a CentOS 6.2 PC, I had noticed a problem with trying to use the VISA vi's in LabVIEW, basically it's not working for me, LabVIEW crashed when trying to create a control or constant for the VISA Open vi.  Tried to launch the VISA tools, they all start and then close abruptly.  NI I/O Trace only shows one line.
    I did read though many threads and decided to collect the NI system.log, which is attached. (system.log.gz).  I did notice a strange message in here about nivisaserver:
    /usr/bin/tail --lines=25 /var/log/messages:
    May 22 11:18:48 localhost abrtd: Package 'nivisaserver' isn't signed with proper key
    May 22 11:18:48 localhost abrtd: Corrupted or bad dump /var/spool/abrt/ccpp-2012-05-22-11:18:48-3258 (res:2), deleting
    Hi MountainMan,
    Thanks for attaching the system report log -- I believe I have a solution for you :-) Let's look at a few of the lines:
    890: /proc/meminfo:
    891: MemTotal: 3894712 kB
    1726: /proc/iomem:
    1784: 100000000-12dffffff : System RAM
    1807: /bin/dmesg:
    1820: BIOS-provided physical RAM map: 2576: [nipal] More than 4GB of addressable memory detected.
    1838: BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
    2576: [nipal] More than 4GB of addressable memory detected.
    2577: [nipal] This configuration is not supported. Check the release notes for more information.
    Starting at the bottom at lines 2576..2577, dmesg had more than just the NI-VISA server signing notification. At system boot, the NI kernel modules refused to load because they detected more than 4 GB of addressable memory. But, if you look towards the top at lines 890..891, meminfo says you have less than 4 GB of system memory, which makes it seem like the NI modules don't know what they're talking about. However, if you look at the report from iomem a little further down on lines 1726..1784, system RAM has been re-mapped above the 4 GB boundary. While your system doesn't have more than 4 GB of RAM, some of its memory has addresses above 4 GB, which the NI modules cannot use and so they refuse to load. How did that happen? Your system BIOS provided a physical RAM map with usable addresses above the threshold (line 1838).
    The fix here is simple -- you need to tell the kernel to reserve addresses above 4 GB [1] so that it won't remap the RAM to higher memory. Once all of the RAM has addresses below the 4 GB threshold, the modules should load and VISA/LabVIEW/et al should stop misbehaving.
    It seems to me that LabVIEW is not handling this situation very gracefully, and maybe you can work with Kira to file a bug report.
    [1] Re: Successful SUSE linux and DAQmx install; nilsdev and other utilities missing.
    http://forums.ni.com/t5/Multifunction-DAQ/Successful-SUSE-linux-and-DAQmx-install-nilsdev-and-other/...
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • I am not able to change my password. I obviously forgot the answers of the secret questions. I tried by email, but received no email. What to do?

    I am not able to change my password. I obviously forgot the answers of the secret questions. I tried by email, but received no email. What to do?

    I have the same problem -- no email arrives when I try to reset my password.
    I'm syncing my iPhone 5 to iTunes and keep getting messages about all the content that will not sync because "not authorized."
    So I try to login to my Apple ID
    - password is wrong
    - follow the link to reset password
    - chose "send email" but no email arrives (I even check 'junk' folder to be sure)
    - go back to reset password and try "Answer security questions"
    - says my DoB is wrong but I'm sure DoB is correct and there's no way forward
    So what is the solution? Re-purchase all the content that won't sync?

  • I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

    That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
    You can read bout it here.
    http://support.apple.com/kb/ht1414
    If that does not work you will need recovery mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • I am trying to set up my new replacement phone and the iCloud account is using my old email that is no longer activated, so I am not able to reset my password in order to set up messaging, etc. What do I do??

    I am trying to set up my new replacement phone and the iCloud account is using my old email that is no longer activated, so I am not able to reset my password in order to set up messaging, etc. What do I do??

    Try to change your Apple ID back to your old email address (http://appleid.apple.com) in order to set up and activate the phone. After the set up please sign out of iCloud and turn off "Find My iPhone" (Settings > iCloud) - do that on all your devices -, then change your Apple ID to your new address again and then add your iCloud account on you devices again.

  • My keyboard is not activated when I want to start my computer. I cannot log on as I am not able to enter my password?

    My keyboard is not activated when I want to start my computer. I cannot Log on as I am not able to enter my password.
    When I log on as guest, I still not able to open my mail box for the same reasons, my keyboard is not activated.

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • V490 server not able to type at ok prompt

    Hello Guyz
    The problem is that when I power on the server with max diag post it will drop at ok prompt with all post result passed. But I am not able to type anything at ok prompt. Input device & Output device are set to ttya when checked from os console. Since autoboot parameter is true it will boot automatically when i do a normal power on. RSC is not configured and I am not getting anything on it. Also graphics card not available in server.Troubleshooting steps done till now.
    1. Powered on server in normal mode and with disk drives removed. It will stop at ok prompt with error cant boot. But not able to type anything.
    2. Replaced PCI riser card which includes NVRAM.
    3. Tried powering on the server with all minimum configuration possible still no luck.
    4. Swapped the only one system board to other one and checked.
    My seniors suggested to replace system board. What you guys think? Please help. Thanks..

    midhu wrote:
    I am using putty software and cisco cable with usb-to-serial converter which is connected to ttya port of server on one end and usb port on my laptop for getting the console of server. Also I am using default baud rate which is 9600.That all seems fine, except...
    Historically, USB-to-serial adapters will often just fail to function in such circumstances.
    There are numerous posts in these forums that go bazck more than a decade (through migrations from old Sun forums, even) that mention such USB adapters. They're not necessarily broken to where you need to replace it. They often just do not work. They won't send/receive the duplex signals you hope to have so that `send` at the laptop becomes `receive` at the V490, and `send` at the V490 becomes `receive` at the laptop. The symptoms are as you described: you can see but not type, or you can type but not see.
    I suggest you go beg, borrow, or claim by eminent domain an old computer that has an actual hardwired serial port and try again.
    I know. All this shouldn't be that hard, and it's frustrating. It should "just work".

  • Not able to see Metadata fields when adding the fields to the rule in UCM

    Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

    Dhilipan,
    I am trying to setup AES at the current Customer.
    You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
    I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
    On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
    Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
    Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
    What I want to achieve is the following:
    When License type is 'EXCPT', system should default the type as 'C50'
    Should put the License type 'EXCPT' into the number field
    Should put the actual License# 'ENC' into the Supplement field
    Should put the ECCN # '5A002' into the Details field
    Thanks,
    Prashant.

  • Error: Invalid Password when trying to sign in on any wireless devise

    Error:  Invalid Password when trying to sign in on any wireless devise
    I even reinstalled my WRT110 to be sure of the Network Name and Password but I still get this error.  I have never been able to log in to the wireless network.  I can see it - Ienter my password and still "Invalid Password"

    I don't understand this: Connect directly to the router.  Is this the http://192.168.1.1?
    I  HAVE changed the network name, I HAVE changed the password.
    I still get invalid password!!!
    I am extremely frustrated by all this.  I need simple instructions.  I followed them when I set the friggin thing up, I reinstalled.  I know what my friggin password is - why why why?

  • Not able to generate AS2 MDN when receiving custom XML via AS2

    Hi friends,
    I have setup the trading partner and the corresponding TP certificate import for receiving the custom XML via AS2 channel.
    I am receiving the custom xml properly to oracle b2b and able to receive the same to bpel as well. however in the oracle b2b console under reports tab i am seeing only one record for inbound document receive and i am not seeing the other record for the AS2 MDN going back to vendor. I have setup the AS2 channel under the external trading partner --> Channel using the vendor AS2 URL and selected all the security parameters while creating the Outbound AS2 channel.
    1. Not able to generate AS2 MDN when receiving custom XML via AS2.
    2. eventhough i am able to decrypt the inbound custom XML and ablr to recieve it in bpel also for processing, in the reports tab the inbound message state is changing to MSG_ERROR and it has the folloing error message:
    Error Code
    B2B-50037
    Error Description
    Machine Info: (***********)  Description: B2B inbound message processing error
    Error Level
    ERROR_LEVEL_COLLABORATION
    for AS2 MDN generation for custom XML receiving using As2 protocol, do we need to setup anything other than the outbound As2 Channel using the external vendor AS2 URL?
    Can you please help me how can i generate the AS2 MDN for the inbound custom XML document i have received and also why the inbound message is failing even though i am receiving the custom XML properly to bpel?
    Thanks,
    Amirineni.

    Hi Prasanna,
    Vendor has enabled the ACK mode as SYNC.
    Below are the headers for the inbound message to B2B. and we are able to receive the input message to bpel also.
    Protocol Transport Binding
    ChannelName=******** AS2-To=****AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=****** Recipient-Address=https://******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=****** Content-Disposition=attachment; filename="smime.p7m" Host=****** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=****** Mime-Version=1.0
    Message Digest
    Message Digest
    Digest Algorithm
    sha1
    Transport Protocol
    HTTP
    Transport Protocol Version
    1.0
    Url
    http://******
    security
    Transport Headers
    ChannelName=****** AS2-To=******AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****AS2_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=***** Recipient-Address=*******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=******* Content-Disposition=attachment; filename="smime.p7m" Host=***** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=***** Mime-Version=1.0
    Thanks,
    Amirineni

  • Not able to reset my password for an old apple id account

    I have an Ipod that I purchased back in 2006.  At the time when I signed up for an apple ID I used at the time an address that The University of South Carolina gave me since I was a student at the time.  Once you graduate which I did they disable your email account, so I don't have that email account.  I am not able to reset my password or change my apple ID because I don't know the password. Obvisously I can't have you send me a link to my old email to be able to set up a new password since I don't have that emaill address no more & can't use it.  Everytime I try to answer the security questions which it has been asking me for my birth month & day it says that I have put in the wrong info, but I know my birth month & day. I really have no way of changing the password or the appl ID. What do I do & who do I contact about this. Now I can't download any music to my Ipod.

    Gilbertfromwi, I still don't understand your question at all.
    Gilbertfromwi wrote:
    This iPad mini was transferred to a new Apple ID. The transfer and serial number was verified thru email.
    I cannot imagine what this means.  You make it sound as if some third party is involved in the transfer.
    If the fomer Apple ID released the iPad Mini in the first place, then it would look like a new machine and the new owner could simply step in and set it up as his/hers.
    Gilbertfromwi wrote:
    When tring to set up iCloud's, the screen is greyed.
    I'm guessing this might mean you go to Settings > iCloud, but cannot input anything.  Do you see someone's Apple ID there?  Anyway, again, if the original Apple ID released the iPad, you could just do Settings > General > Reset > Erase all content and settings and start over.
    Gilbertfromwi wrote:
    Then, it asks for the password for the old Apple ID. When I enter this password, it is not accepted.
    So when this quesion arises, do you see something like "Apple ID : [the old one is shown] ... Password : [you try to enter the password of the old Apple ID, but it is rejected]"?

Maybe you are looking for