Not able to understand chekpoint completely

Hi all,
i have gone through oracle manuals,but i m still not able to understand completely that how does it works
can you plz tell me in simple terms so i can understand it.
cheers
amit

Checkpoint (CKPT)
At specific times, all modified database buffers in the system global area are written to the datafiles by DBWn. This event is called a checkpoint. The checkpoint process is responsible for signalling DBWn at checkpoints and updating all the datafiles and control files of the database to indicate the most recent checkpoint.

Similar Messages

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution

I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.

It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.

Not able to understand someclass=otherclass.class.methodinotherclass

Hello all,
I am trying to understand one application source code, in that i came accross the following assign ment:
someclass=otherclass.class.methodinotherclass
I am not able to understand why they used ".class"
could any one explain me.
excuse my english.
Thanks in advance.
regards
vamsee
Message was edited by:
vamseebobby
Message was edited by:
vamseebobby

Every object has a member named "class" which
gets access to the ClassWhy doesn't the Object API show that member?Wait a minute, I goofed a bit. This will probably end up as more ammo for Norweed to use against me as he tries to prove he's competent whereas I am not o_O
Every class definition has an implicit static member named "class" is what I meant to say. Every object has a "getClass()" method to return the same thing. That method is documented in the API docs, but the "class" implicit member isn't I guess.

Not able to get the complete URL in mail content

Hi All,
I want to give the below link in mail which is sent from workflow, so on click of it, the user will be able to open the particular opportunity directly.
https://<sys_host>%3Fcrm-object-type%3DBT111_OPPT%26crm-object-action%3DB%26crm-object-keyname%3DGUID%26crm-object-value%3DXXXXXXXXXXXX
XXXXX here is GUID of the Opportunity of 32 character.
For this, I have created a attribute of type BAPITGB-LINE. When inserting this expression into the mail activity of the WF, I have chosen the data to be exported as "All lines as cont. text".
In this attribute, when I concatenate the values and the guid, I get only part of the link as below which is 133 characters.
https://<sys_host>%3fcrm-object-type%3dbt111_oppt%26crm-object-action%3db%26crm-object-keyname%3dguid%26cr
When I try to append it in a internal table of type BAPITGB, I am getting the complete URL but with a space between every line in the internal table as below.
https://<sys_host>%3Fcrm-object-type%3DBT111_OPPT[SPACE]%26crm-object-action%3DB[SPACE]
%26crm-object-keyname%3DGUID[SPACE]%26crm-object-value%3D
DFD60A8AD0E53DF1918F0050569F0324
Please let me know, how to avoid this space in append statements. Also, the concatenate is taking only 132 characters, after which it cuts the URL, leaving it incomplete.Kindly correct me if I was wrong somewhere.
Thanks,
Ramya
Edited by: Gali Kling Schneider on Jul 11, 2011 9:47 AM

Hi Sanjay,
As suggested, I have split the URL into 3 links in WF container having the initial values as below.
Link1 -> <sys_host>.%3Fcrm-object-type%3DBT111_OPPT
Link2 -> %26crm-object-action%3DB %26crm-object-keyname%3DGUID
Link3 -> %26crm-object-value%3D
In the mail activity, I have given the link as: &LINK1&&LINK2&&LINK3&&GUID&
&GUID&-> GUID of the opportunity.
When I tested this in log-> List with technical details-> mail, it had the correct value without space as below.
https://<sys_host>.%3Fcrm-object
-type%3DBT111_OPPT%26crm-object-action%3DB
%26crm-object-keyname%3DGUID%26crm-object-value%3DDFD60A8AD0E53DF1918F00505
69F0324
But in SOST, when I checked for the link it is having spaces as below:
https://<sys_host>%20%3Fcrm-object-type%3DBT111_OPPT%20%26crm-object-action%3DB%26crm-object-keyname%3DGUID%20%26crm-object-value%3D%20DFD60A8AD0E53DF1918F0050569F0324
Kindly advice.
Thanks,
Ramya
Edited by: Gali Kling Schneider on Jul 11, 2011 9:48 AM

Not able to put delivery completed indicator in scheduleing aggrement

Hi ,
We are unable to put delivery completed indicator in scheduling aggrement . We are geting following message and its common scheduleing aggremnt and material don't have any stock and sub contracting order . Still what the point s we need to check in this case .
"Delivery completed" indicator cannot be set for item 00010
Message no. 06 848
Diagnosis
You have set the "delivery completed" indicator for a stock transfer item.
System Response
You can only set the "delivery completed" indicator in stock transfer items if
the sum of the goods issue quantities in the supplying plant equals the sum of the goods receipt quantities in the receiving plant
the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Procedure
Cancel the "delivery completed" indicator."
RB

Is there an old/any STO pending.(Plant to plant delivery) of that particular item....
like Completion of stock transfers with GI qty > GR qty scenario....
plz check and revert back,if there is one plz close it and then put indicaor in SCHLD AGREE...

BAPI_PO_Change in SAP 4.7 not able to check version complete check box

Hello,
Our requirement is to change the delivery date of one or more items in PO after PO release and print,
We are using BAPI_PO_CHNAGE to change the delivery date which will run in background.
As version management is active in our system, new version gets generated as soon as we change the PO and we
need to check the version completed flag along with the changes in the PO.
We canot use BDC because, BDC is also not tracking the version management tab specifically the version completed flag while recording.
We are not very keen in directly updating the PO version table as it may have serious impact in the system.
WE have treied in SAP 6.0 and its working there but in SAP 4.7 its not working.
Please help us in solving this problem?
Thanks in advance.

closing the question
Edited by: Sachin on May 19, 2010 7:57 AM

Not able to download the complete data to the local PC file

Hi,
I have a BDC program where I am creating an Unix file and later downloading the same to the local PC file(Text file).
As far as creating the Unix file is concerned, there are no issues. It is working fine.
When I try to download the data to the local file(in my case.. it is Text file), it is not downloading the complete data. I mean, it is saying that 3,94,654 records are processed. But, it is downloading around 94,000 records only to the Text file. Approximately, 3,00,000 records are missing when downloading.
Can anyone tell me what the reason might be..?
My doubt is.... will there be any limit to the number of records to be downloaded to the local PC file(say text file).
Thanks in advance...
Best Regards,
Paddu.

Hi,
I have a similar program running for over 5 Lac records.
There could be issues with memory. Also check in debug if the internal table holds the complete records. If everythings fine then as suggested in upper reply
Create internal tables with 90,000 records and use FM GUI_DOWNLOAD with importing parameter APPEND = 'X' and with the same filename and same path.
Hope it helps.
Lokesh

I am not able to understand this java program

What is the output of bellow code ?
public class Bean{
    private String str;
    Bean(String str ){
        this.str = str;
    public String getStr() {
        return str;
    public boolean equals(Object o){
        if (!(o instanceof Bean)) {
            return false;
        return ((Bean) o).getStr().equals(str);
    public int hashCode() {
        return 12345;
    public String toString() {
        return str;
import java.util.HashSet;
public class Test {
    public static void main(String ... sss) {
        HashSet myMap = new HashSet();
        String s1 = new String("das");
        String s2 = new String("das");
        Bean s3 = new Bean("abcdef");
        Bean s4 = new Bean("abcdef");
        myMap.add(s1);
        myMap.add(s2);
        myMap.add(s3);
        myMap.add(s4);
        System.out.println(myMap);
}(Choose correct one from multiple bellow)
1) das abcdef
2) das abcdef das abcdef
3) das das abcdef abcdef
4) das
What i understand is that the following constructor
Bean(String str ){
        this.str = str;
    }is used to initialize the instance variable
private String str;then we have overridden the equals method, in this method we first check if o is not an instance of Bean class whereby we return false
then we are calling getStr() and equals(str)
return ((Bean) o).getStr().equals(str);the getStr() method is going to return the instance variable we initialized. SO we will be having something like
str.equals(str) Here I am not clear what is going to be the output. Please explain in detail

1. [das, abcdef]
map create a pair key - value, similar to Dictionary.
"Hash map structures consist of an internal array where elements are stored. Since the internal storage is an array, clearly there must be a mechanism for determining an index into the array for an arbitrary key. In fact, the mechanism needs to give an integer index value which is smaller than the size of the array. This mechanism is called the hash function. In Java hashed based Maps, the hash function converts any object into an integer that fits into the internal array. You don't have to look hard to find an easily available hash function: every object has a hashCode() method which returns an integer value. To map that value into any array, it is sufficient to convert it to a positive value and take the remainder after dividing by the array size. "
you will get the same hashcode for the same value!

Not able to understand how to access ICloud on Ipod

Recently got Icloud on my MAC and my Ipod shows it is activated. However, I can't find a place to access my docs from my mac, and even when I select photo stream, I don't get any photos to see.
Anyone with an answer, or should I call a tech at Apple?
Thanks

- Do you have an iPod with iOS 5 and have you loo\gged into iCloud on the iPod and turned on the various iCloud iCloud features? (Settings>iCloud).
- What hpappens when on the Mac you go to icloud.com, sign in and then go the various iClould areas.
- Presently you can only access Pages documents via icloud.com but some apps may provide that feature too.
- See:
iCloud: Photo Stream FAQ
iCloud: Photo Stream Troubleshooting

Not able to configue instance in BPM 9.24

Hi ,
I have uninstalled BPM 9.22 and trying to install BPM 9.24, however when I am configuring
instance then I found some new option like - filling truststore /keystore path, password etc, so
I am not able to understand what to fill here and what option need to check in last three cert validation option.
So could some one plz give me the complete information of the details need to fill in security setting option.
Error - faild to register
Ajeet Kumar

kumaraj,
You are in the consumer end products forum. You will also want to ask your question over at the Enterprise Business Community.
Click the plus sign (+) next to Discussion Boards to drop down all the options for servers, networking and any other professional equipment problem.
http://h30499.www3.hp.com/
Good luck.

Not able to log out of application:JspServlet:unable to dispatch to request

We are developing our application on oracle ADF (jdev verison:10.1.3.2). and deploying it in the SOA server(version 10.1.3.1).
The problem with our application is that when the logout button is clicked the application gives the following error:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
When the application log is consulted it reads:
08/07/02 07:20:45.209 Buddy: JspServlet: unable to dispatch to requested page: Exception:java.io.FileNotFoundException: C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\skins\common\Login.jspx (The system cannot find the path specified)
We have an application wherein a global navigation rule in faces-config is defined as
<navigation-rule>
<navigation-case>
<from-outcome>login</from-outcome>
<to-view-id>/common/Login.jspx</to-view-id>
<redirect/>
</navigation-case>
The file Login.jspx is present at
C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\common\Login.jspx
But somehow the deployed version tries to find it at
C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\skins\common\Login.jspx
I am not able to understand why the page is being searched in
~\skins\common\Login.jspx and not in ~\common\Login.jspx
Please help me out of this situation.
Buddhadev

Please post ADF questions to the JDeveloper forum. ADF is a component of JDeveloper and all the experts in ADF are in the JDeveloper forum.
-steve-

Hi There, I'm not able to Get the value for echo %cust_top% for custom dev

Hi,
Before doing any thing in dos usually i run envshell
Which let me to switch to product specific location through Appl_top, au_top etc
I'm Sending Out Put At cmd Prompt Please Check
D:\oracle\visappl>echo %ar_top%
d:\oracle\visappl\ar\11.5.0
but not able to work for custom development.
D:\oracle\visappl>echo %cust_top%
%cust_top%
D:\oracle\visappl>
Why it's so?
Bachan.

Hi There,
I got document, but not able to understand 2nd step i.e
"2) Add the custom module into the environment
Apply ADX.E.1 and add the entry to topfile.txt as a standard product top entry (follow the existing model in the file)
Customised environment variables can be added to AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file.
If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
1. What is ment by ADX.E.1 and topfile.txt ?
2. And How can i add to "AutoConfig by using the filename specificed by s_custom_file, which is then called from the APPSORA.env file. " ?
3. And agin What is ment by "If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc"
Please Give a breaf note on this Question's.
Thanks Bachan

Not able to create a universe when using nav. att. 0MATL_TYPE in the query

Dear experts,
A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
The error we are having is the following:
We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
We are working with:
BW 3.5 - SP19, BEx 3.x
BOBJ XI 3.0 (without service pack or fix pack)
Does any one have any clue on what could be the reason for this issue??
Thanks in advance for your interest!
Best regards!!!!
Cecilia

Hello Ingo,
First of all thanks for your help, since we are really concerned about this issue.
We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
Thank's very much in advance for your help!!!! This is so disconcerting.......
Best regards!
No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
Thanks again for the help!!!
Cecilia
Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
Edited by: Cecilia Guerra on May 11, 2009 2:09 PM

Data Pump Abends : Not able to write to trails to remote directory

I am using following to do replication
SOURCE SCHEMA: HBP
TABLE: EMPLOYEES
SOURCE GOLDEN GATE SCHEMA: ggs_owner
Z:\ is mapped on source system which points to \\206.120.226.47\ggtarget ( Remote System )
TARGET SCHEMA: HBP
TABLE: EMPLOYEES
TARGET GOLDEN GATE SCHEMA: ggs_target
ON SOURCE:
1. ADD EXTRACT ext2, TRANLOG, BEGIN NOW
2. ADD EXTTRAIL D:\GGATE\dirdat\lt, EXTRACT ext2
3. ADD EXTRACT dtest, EXTTRAILSOURCE D:\GGATE\dirdat\lt
4. EDIT PARAMS ext2
     EXTRACT ext2
     USERID ggs_owner, PASSWORD ggs_owner
     EXTTRAIL D:\GGATE\dirdat\lt
     TABLE HBP.EMPLOYEES;
5. ADD RMTTRAIL Z:\dirdat\rt, EXTRACT dtest
6. EDIT PARAMS dtest
     EXTRACT dtest
     USERID ggs_target, PASSWORD target
     RMTHOST 206.120.226.47, MGRPORT 7809
     RMTTRAIL Z:\dirdat\rt
     PASSTHRU
     TABLE HBP.EMPLOYEES;
     Note: Full rights are given on Z:\dirdat
7. START EXTRACT ext2
Successfully Started
8. START EXTRACT dtest
Error: There is a problem in network communication, a remote file problem, encryption keys for target and source do not match (if using ENCRYPT) or an unknown error. (Remote file used is Z:\dirdat\rt000000, reply received is Could not create Z:\dirdat\rt000000). 2011-03-16 18:02:51 ERROR OGG-01668 Oracle GoldenGate Capture for Oracle, DTEST.prm: PROCESS ABENDING.

The OS user running Manager Service on source system is : zzxpzr whereas the target system has Golden Gate configured under OS user: jzdlc1.
From source system, I am able to create a text file to the remote mapped drive. Not able to understand why Golden Gate is not able to create file remotely.
(1) Is Mapped Dirve concept permitted in Golden Gate ?
(2) Instead of Mapped Drive, if I use \\201.120.220.56\GGTARGET\dirdat\rt while added REMOTE TRAIL using command ADD RMTTRAIL then it gives error that "filename is incorrect"
Thanks Steve for your suggestion. I shall try to configure Golden Gate with same OS user as on Source System.

Flash File not Able to Display using ADF Trinidad components..

Hi All,
I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>-->
Thanks
Chetan

Hi Ramandeep,
I tried that option early but did not work. Not able to understand why.
Below is the code snippet.
<tr:panelGroupLayout layout="vertical">
<tr:panelHorizontalLayout>

<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>
</f:verbatim>
</tr:panelHorizontalLayout>
</tr:panelGroupLayout>
And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
Thanks
Chetan

Not able to understand chekpoint completely

Similar Messages

Maybe you are looking for