Not able to update pixelator. Purchases show "an error has occurred" repeatedly

I am having problems in updating Pixelator which I purchased from App Store. When I click update I am informed that it can not be down loaded go to Purchases. When I do that I get the message that an error has ocurred. What do I do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

  • HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I'm not able to update my purchased apps

    Hi there,
    I am not able to update my purchased apps on my iphone 5s.
    when i'm pushing the update button in the app store in my iphone, after few second syncing nothing happening.
    Regard..

    Make sure you are signed in using the same Apple ID used for the original purchases.
    Tap Settings > iTunes & App Store > Apple ID
    If you are using the correct Apple ID, reset the device then try again.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

  • I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

    I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Just downloaded PDF Editor Pro, version 3.7.0, but it wasn't working. I checked for updates; none, but it showed "an error has occurred."  What do I do?

    Just downloaded PDF Editor Pro, version 3.7.0, but it wasn't working. I checked for updates; none, but it showed "an error has occurred."  What do I do?

    You should check the developer's website.

  • Unable to check for purchases, an unknown error has occured (5002)

    Unable to check for purchases, an unknown error has occured (5002)
    I was in the middle of download and got an error. (I didn't write down that error) I restarted Itunes and then got this error. I then upgraded to the latest patch (from 7.1 to 7.1.1) and the error above is what I get. Any Help?? Thanks

    I closed and reopened Itunes again and it worked. So I'm not too sure why it's working, but it is. woo hoo

  • Error updating LDAP properties: An internal error has occurred in the secLdap plugin

    Post Author: kbd_vijey
    CA Forum: Authentication
    Hi,
    We are using Environment / Tools : BusinessObjects Enterprise XI R2 ,Sun Soloris 10,Active Directory.
    To Configure the LDAP, we have done from CMC - > Authentication -> LDAP.
    The below steps we have followed.
    1) Please enter the LDAP hosts you are using. => Here, we have entered our AD's hostname:port (Ex: 192.168.0.8:389) (Is it correct?)
    2) We have passed all the required informations for all other tabs.
    3) SSL - Basic(no SSL), Authentication - Basic(no SSO)
    Finally its providing the error as " Error updating LDAP properties: An internal error has occurred in the secLdap plugin."
    If any one have solution or faced same problem, Kindly help us to resolve it.
    Thanks & Best Rgds,Vijey

    Post Author: TAZ
    CA Forum: Authentication
    There are 3 things needed to get the LDAP plugin configured.
    1) Host:port
    2) Base DN, usually dc=domain, dc=com
    3) LDAP Administrator DN (this is not a visible attribute in AD unless you use a tool like ADSIedit or ADExplorer). You probably have to enter the Base DN instead of the username.
    There are other AD specific issues when using the LDAP plugin to AD such as picking custom attributes, rules for multi domains, etc
    Regards,
    Tim

  • The document could not be saved. A file I/O error has occurred

    Hello,
    I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
    I have tried:
    1. Saving to local hard drive
    2. Saving to network drive
    3. Renaming file and repeating steps 1&2
    4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
    Any thoughts? Thanks so much.
    Phil
    System specs:
    Windows 7 Professional
    16 gb RAM
    500Gb Hard drive (409gb free)
    Adobe Acrobat X Pro
    Message was edited by: bldfb024  (system specs included at bottom)

    No it is from a disk drive.
    Robb Hanke
    [signature deleted by host]

  • I keep getting "The document could not be saved. A file I/O error has occurred."

    Everytime I try to save a PDF file in Reader X... "save as...PDF" I get the "The document could not be saved. A file I/O error has occurred."
    When I save it "save as...Text" is saves.

    No it is from a disk drive.
    Robb Hanke
    [signature deleted by host]

  • I am using numbers but I am not able to update numbers and I get error that you could not able to download this app.

    I am using numbers but I am not able to update last version of numbers. When I try to update that I get error that you could not able to download this app. So what should I do?  

    Try running the combo update.
    10.9.2
    If that works and it still shows as an update, try re-indexing Spotlight.
    Spotlight – Re-index

  • TS1717 when i attempt to update genius i get a message saying ,we co has anyone any ideasuld not complete your itunes store request an unknown error has occured (4002)

    When i attemp to update genius i get a message aaying we could not complete your itunes store request an unknown error has occoured (4002) has anyone encountered this problem

    Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Ios6 update complete but "an SSL error has occurred and a secure connection to the server cannot be made" shows up so I

    I updated ios6 this morning nad when it prompts me to put in my apple user id and password, I get this message...
    "an SSL error has occurred and a secure connection to the server cannot be made".  I'm in a hotel so is there a problem with the server connection?  My laptop is working but I went throught the secure hotel internet.  My phone was working fine in the room before the update.  HELP!  I'm far from home and need my phone.
    Thanks,
    Tammy

    Deleting the servermgrd certificate in Keychain Access > System > Certificates worked for me as well.
    It was the only one I had to delete.

  • In App Purchase An unknown error has occurred with test user account

    I have created a test app that has in app purchasing. I am able to connect to the store and verify my product ID's. I then use my test user account to purchase a product. And guess what... it works... the first time. If I try to use the test user account to buy another product (the same product or a different one) then I get a pop up that says
    "An unknown error has occurred"
    with a "Cancel" and "Retry" option. If I retry then I get the same error. After hitting cancel I get the error:
    Error Domain=SKErrorDomain Code=0 UserInfo=0x161180 "Cannot connect to iTunes Store"
    Any ideas?

    I am having the same problem with my test account on multiple versions of iPhones. Any idea? Would this error affect real users?

  • IPod will no restore shows unknown error has occured with code 1429, how do i fix this probem?

    Ipod classic 80G will not restore, says "An unknown error has occured, error code 1429" how do i fix this problem?

    This has just happened to me today. I have an iphone 5 on Verizon. I was using the internet on the device normally when it started. It couldn't access any online data even though it had 4 bars of service and LTE. I restarted it and it would be stuck "Searching for network". I tried wiping the phone with no luck. It gets stuck at around 99% of the firmware restore process and hangs there for about 25 minutes before itunes gives me the error described above. I tried the recover-mode restore with the same results.
    I need a working phone ASAP, this is extremely frustrating!

  • Download/update my apps, "An unknown error has occurred." message.

    I have an iPhone 4S, and when i try to download/update my apps using the phone, i get an "An unknown error has occurred" message. What's going on and what do i do to fix it?
    Help! I don't want to delete everything and start from factory default again

    Hi
    I had the same issue on my iPhone, to resolve this I did a Backup/Restore on the device with iTunes. After this I could download apps on the device again...
    //Jonas

Maybe you are looking for

  • Ipod not showing up in Itunes on Mac computer

    When I plug in my ipod touch to my computer it does not show up in Itunes. do I need to reset my ipod touch? Help!!! I have done all the things to troubleshoot this situation other than reset my ipod. I am afraid to do this. I don't want to loose any

  • Can I include a text file to read from within java?

    I have a config file I need to read within a java program called config.xml. I want to reference this document, but don't now how to without using '..new(File("config.xml"))' and this forces me to put it in a directory somewhere. I just want to refer

  • System is not considering open reservations at the time of next MRP Run

    Hi, In our business process, subcontractors are defind as Vendors in the SAP system and materials will be provided / transfered to these subcontractors in the SAP system through Subcontracting route (541 movement type). Now, business wants to 'Monito

  • Why not index every field in a database

    Hello, I hope this is not to much of a newbie question. We have a database that is being used by an application. We do not know which fields are queried on, the application allows for any/all field(s) to be searched on. Obviously, we can know which f

  • IDES 4.7, MMC - disp+work running but message server not reachable

    Hi, I loaded IDES 4.7 in Windows 2003 server with Oracle 9i. While starting MMC, the disp+work running but message server not reached causing the issue. Please suggest, Thanks, Prasad