Not able to update the software 4.3.5 for my iphone

Hi,
I am not able to sync iphone software to 4.3.5.. Tried by deleting all applications and also resetting iphone, still not working
required support

this is the message i am getting even after firewall is disabled

Similar Messages

HT4623 I have an iPhone 4 and for some reason I'm not able to update the software. I go to Settings then General but it doesn't even have a Software Update option. Am I missing something?

I have an iPhone 4 and for some reason I'm not able to update the software. I go to Settings then General but it doesn't even have a Software Update option. Am I missing something?

With iOS 4, the only way to update your software is connected to iTunes. OTA (over the air) updates were not available until iOS 5. You will need to connect your iPhone to a computer and use iTunes to download and install the iOS updates on your iPhone (at least until your iOS version is 5.0 or higher).

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

IN APPLE STORE I WAS NOT ABLE TO UPDATE MY SOFTWARE AND THER IS ALWAYS AN ERROR 13 SHOWN WHILE UPDATING, IN APPLE STORE I WAS NOT ABLE TO UPDATE MY SOFTWARE AND THER IS ALWAYS AN ERROR 13 SHOWN WHILE UPDATING

In Apple store I was not able to update my software and ther was an error whenever i tried to update it ,error is 13

Did u try to delete ~/Library/Cookies/com.apple.appstore.plist yet?
Just an FIY, my first post are not steps, they are different ways of fixing the problem.
I.E.
Try #1. ->>Didnt work. Then Try #2. --> if that doesnt contact this post again. I will try to help you as much as I can before the need to reformat is considered.

HT1338 I'm not able to update my software (Mac OS X version 10.6.8)

I'm not able to update my software (Mac OS X version 10.6.8), it gives me the reply "Software Update Server (172.22.5.7) is not responding" and there is nothing wrong with my internet connection. What should I do?

Try later. I just checked mine and got Software's up to date.

Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.

I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1)     e_project_definition.
2)     e_wbs_element_table.
3)     e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition   TYPE bapipr-project_definition,
      with_activities      TYPE bapipr-with_activities,
      with_milestones      TYPE bapipr-with_milestones,
      with_subtree         TYPE bapipr-with_subtree,
      e_project_definition TYPE bapi_project_definition_ex,
      return               TYPE bapireturn1.
DATA: i_wbs_element_table         TYPE TABLE OF     bapi_wbs_elements,
      e_wbs_element_table         TYPE TABLE OF     bapi_wbs_element_exp,
      e_wbs_milestone_table   TYPE TABLE OF bapi_wbs_milestone_exp,
      e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
      e_activity_table        TYPE TABLE OF bapi_network_activity_exp,
      e_message_table         TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table    TYPE      bapi_wbs_element_exp,
      wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition        TYPE bapi_project_definition.
DATA: l_project_definition_upd    TYPE bapi_project_definition_up.
DATA: l_project_definition_stru   TYPE bapi_project_definition.
DATA :l_pspnr      TYPE ps_intnr,
      l_pspid      TYPE ps_pspid,
      l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
      ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project    TYPE TABLE OF bapi_method_project,
       wa_method_project   TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table         TYPE TABLE OF bapi_wbs_element,
       it_wbs_hierarchie_table      TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table         TYPE bapi_wbs_element,
       wl_wbs_hierarchie_table      TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update   TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update   TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
    input = 'C01.10995'
IMPORTING
    output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
    project_definition     = project_definition
IMPORTING
    e_project_definition   = e_project_definition
    return                 = return
TABLES
    i_wbs_element_table    = i_wbs_element_table
    e_wbs_element_table    = e_wbs_element_table
    e_wbs_milestone_table = e_wbs_milestone_table
    e_wbs_hierarchie_table = e_wbs_hierarchie_table
    e_activity_table       = e_activity_table
    e_message_table        = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
    input = l_pspid
IMPORTING
    output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
    search_imp = '2'
    prps_s_imp = l_pspid
    prps_e_imp = 'C01.29999'
    no_dialog = 'X'
IMPORTING
    prps_exp   = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
        wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method     = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
    WHEN '9'.
      l_index = 1.
    WHEN '12'.
      l_index = 2.
    WHEN '15'.
      l_index = 3.
    WHEN '18'.
      l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method     = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc       = 'l_project_definition_upd'.
fun_struc   = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc       = 'l_wbs_element_table_update'.
fun_struc   = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
    i_project_definition       = l_project_definition
    i_project_definition_upd   = l_project_definition_upd
TABLES
    i_method_project           = i_method_project
    i_wbs_element_table_update = i_wbs_element_table_update
    i_wbs_element_table        = it_wbs_element_table.
   i_wbs_hierarchie_table     = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Please help me to solve the issue.

I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's

Hi. I am not able to update the Adobe Flash Player on my MackBook Pro. The problem I am getting is a blank page for Step3. Can someone help please?

Hi. I am not able to update the Adobe Flash Player on my MackBook Pro. The problem I am getting is a blank page for Step3. Can someone help please?

If you already have an older version of Flash Player, open the Preference pane and select Check Now... under the Update portion under the General tab:
You shouldn't have to install a new version from the website (I'm not even sure if you can) if you've already installed Flash Player.
Clinton

When I log in to update a page it says that's someone else is already logged in (but they are not) so I'm not able to update the page - any suggestions?

When I log in to update a page it says that's someone else is already logged in (but they are not) so I'm not able to update the page - any suggestions?

I take it you are not the administrator for the site? If so, you would be given the option to unlock the page (it will be near the top of the screen in a yellow box).
Do you have access to the site outside of Contribute. If you can't unlock it via the administrative function mentioned above, you need to go into the site using Windows Explorer (if it's a local development site) or an FTP client and find a file with the same name as the page but with a .lck extension and delete it. That will unlock the page.

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

My iphone 3g does not work after updating the software through itunes

Some days ago I made a security copy of my iPhone 3G at iTunes. Today when I conected my iPhone to iTunes I had a message saying I had to update the software of my phone. I accepted and after around 30 minutes of update I got another message saying there had been a problem restarting my phone. The screen of my mobile was showing the iTunes icone and the USB icone and I can't access to the content of it. So I disconnected the mobile from iTunes and connected it again and I got another message saying iTunes has detected a mobile phone in recovering process and it says I have to restaure the iPhone to be able to use it in iTunes. And, by the way, before all this when I connected my phone to iTunes the iTunes recognized the name of my mobile. It doesn't anymore, it just says "iPhone" on the left column.
My question is: Should I restaure the iPhone? Will I be able to recover the security copy I made some days ago? Where can I access that copy?
Thank you so much in advance!
B

You're welcome.
Already answered.
When restoring the iPhone with iTunes, the iPhone is completely erased first folllowed by the current iOS version being re-installed. After iOS is reinstalled, you are prompted to restore from your iPhone's backup, which is the default selection. The other available selection is to restore as a new iPhone or not from the backup.

HT4623 HI, i am using I POD 3rd generatin with OS 3.1.3. I am not able to update the new IOS and i could not found the update button in my POD. Pleaese help me how do that. regards

Dear Friends,
I am using IPOD touch 3rd generation with OS 3.1.3 (7E18) (Model MA623LL), i am not able to upgrade the IOS. My IPOD does not have the software update button.
Please help me how to upgrade the IOS for this version i could not able to download the games and new features.
Please guide me.
regards
Nagaraju T
[email protected]

You iPod, model MA623LL , is a 1G iPod and those can only go to iOS 3.1.3
Identifying iPod models

Not Able to Update the PSA Request.

Hi All,
I am facing one Problem I am having 10 requests in my PSA.9 requests are updated in to my Data Target but last 10th request is having some erroneous records which I didnu2019t notice that error records next day I have seen the error request in PSA then I have corrected those erroneous records. Now I am not able to update this request to my data target.
When I went through the PSA manage tab there I have selected the erroneous request and when I press the button Update with Scheduler that is going to the Info Package Screen there I am not able to see my data target. When I start the info package its giving error (Data Target is not defined)
My data target is contain the Aggregates is there any issue with the Aggregates.
Any one please advise on this how to update this error request.
Advance Thanks.

Hi Sudheer,
check your authorization, it seems you have only loading authorization not deleting.
creat one more infopackge and select PSA and datatarget option try loading using this infopackage.
Regards
Daya Sagar

HT1695 I am not able to update the calendar app or reminder app. There is no ability to update and siri is also unable to set a reminder or update the calendar. This is a new phone.

I am not able to update my calendar or reminders. I've looked at other iPhones and they have a + button to allow you to update. How do I fix this. Also, Siri also does not update the reminders or calendar.
Please help

Earlier iOS apps are becoming increasingly difficult to find. You may want to look at VintApps, new in the Apple app store, that makes this much easier.
Vintapps info/support: https://www.facebook.com/VintApps313
For a web based method see,
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
Although I wrote my 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Be sure to backup your current apps on earlier devices. Once the vendor updates them past your maximum iOS, they can not be downloaded again.

My Iphone 4 will not let me update the software to ios 7.1.2, how do I need to correct this?

I Phone 4 will not let me update my software to ios 7.1.2.

Nilena, thanks for the information! Do you have a computer? What error does it give you when you try to do over the air? You can also try to update if via computer see here: http://support.apple.com/en-us/HT4623. Let me know if their is anything else I can help you with.
Thanks,
AmberF_VZW
Follow us on Twitter @VZWSupport

Why am I not able to update my software thru PCCompanion

I am having trouble updating my Xperia X10 software, would someone please give me an idea as to why and is there a resolution to this issue?
Cheers,

Hi.
I'm having trouble updating the software on my X8 also, I've already made a thread on it in the X8 topic area and haven't recieved much in the way of help.
http://talk.sonyericsson.com/thread/10538
I've tried bot PC companion (where the download mever starts, instead I jsut recieve "download error: check your internet connection") and the Update software (which is never able to detect the product).
I've emailed support about it, to whihc I recieved an email basically telling me how to update rather than offering any sort of support.
What trouble are you having exactly?

Not able to update the software 4.3.5 for my iphone

Similar Messages

Maybe you are looking for