Not able to use "Fixed recepients" option

hi all,
can anyone help me out,
while configuring alert when i am adding user to alert category i created
i am not able to do it , nothing appears.
previously, when i was creating alert category though the xi_admin role was assigned but still any action during creation of alert catgry wsa asking about request number..though i continued wth that but was stuck up in this.
else hav created msg text, container etc.following mich's blog..
waiting for inputs
thanks
Pratibha

Hi ,
Sorry for delay ,
I have captured the details as you required :
Please find attache file .
I am working on the same now but still i am not able to resolve the issue so far .
I gone through the document where it is mentioned that ,we can face the same issue if you are not able to resolve the DNS name of the server.
I tried to add the entry in localhost file with server IP address with server name and deleted the existed entry of 127.0.0.1 and afterword I tried but no luck ........
I have attached the all necessary details ..
Please suggest me based on the same .
Thanks,
Vinod

Similar Messages

Iam not able to use all the options in my ichat and neither is my sister can anyone help us were both new to macbooks??

both me and my sister do not have all the options available to us on ichat and we both want to use the video chat help please were both new to the mac worlds. thanks!

Hi,
iChat 6 ?
I have seen one post that suggests the the Connection Doctor (VIdeo Menu) says in the capabilities tab that the AIR will not do Multiway Video or Audio chats.
I am not sure how true this is as iChat 4 and 5 can.
Much earlier Mac computers such as G4 signle Processors do have this issue. I would not have expected it with an Intel Processor.
File Transfers can be dependent on the Port used being open in your router (As can Video and Audio chats)
Screen Sharing requires that you use UPnP to open ports in the router (As well as turning it On in the vidoe Menu).
If you could be more precise I could match my answers to your questions.
It is late where I am and it will be about 20 hours before I read any reply.
10:28 PM Thursday; August 25, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

Not able to get the profile option value

Hi,
Not able to get the profile option value after i changed the new value in the application.
I am using fnd_global.apps_initialize to initialize the apps from PLSQL code to get the updated profile option value. But fnd_profile.value is not getting fetched the updated value. Still it is fetching the old one. I mean it is stored in database cache. Please any one let me know how to get the new value every time after i changed the value.
Thanks

What is the application release?
Is this a custom or seeded profile option?
Can you confirm that the value got changed from the application (query the profile option and verify the value)?
Can you reproduce the issue if you use an API to update this profile option as per (How to Change Profile Option Value Without Forms? [ID 943710.1])?
Thanks,
Hussein

Not able to edit the value options in LKM

Hi
I have recently upgraded to ODI 11g .
In that we are not able to edit the value options in LKM.
(i.e.. editor window is not appearing, not able to edit the text.
Please let me know the solution .
Thanks

We were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
Thanks a lot!!

I am not able to use my external hard drive with my Mac.

I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

It was likely formatted in NTFS which is readable by the Mac, but not writeable.
You should be able to reformat the disk in Disk Utility.
After having copied all the data off of it, you can try re-partitioning it.
Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
Click on the Partition tab.
Select 1-partition from the partition menu.
Click the Options button and set to GUID
Set the format to Mac OS Extended (Journaled)
Give the Volume a name and click Apply.

Not able to use Mac after booting windows from bootcamp!

Hello,
In my Mac mini, I dual booted it by installing windows on it using bootcamp!
Could you help me how to go to mac partition and i am also not able to use windows!
Pls help
Punit Khatri
+91-9925326095

Hi there:
You may be able to start up the Mac in such a way as to look
for an OS X volume at the same time using a keyboard comb-
ination at startup... Press key(s) immediately after start tone.
Press Option (opt) key during startup will start in Startup Manager
where you can select an OS X volume or network volume to run.
{There is also a way to choose a hardware test for diagnostic
purposes on startup, too. Some macs have features in the OS
to include a 'recovery' mode on later models.}
• Startup key combinations for Intel-based Mac:
http://support.apple.com/kb/HT1533
PS: if you decide to remove Windows, you should also
consider Boot Camp to remove the partition it made.
Hopefully this helps.
Good luck & happy computing!

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

Not able to USE Withholding tax in multi plant PO

We have a multi-plant PO for same vendor. When we are doing MIRO for plants other than Corp Serv.. We are not able to use Withholding tax. F4 does not gives any option in witholding tab in miro. where could be the problem

Hi sachin,
we also facing the same problem. we tried by passing to table accounttax.getting message documnet posted with key.but couldn't find the entry in table with that key.are the tables bkpf & bseg where it stores in case of account tax also?
cau send example code which you have tried and succes post with tax item and so flag was set.
Its so urgent for us.Please help us.
Thanks in advance.
salini

HT1918 why i am not able to see the none option in the payment link?

why i am not able to see the none option in the payment link?

Did you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions.

Workflow : not able to find team working option in SWDD 4.7

Hi,
In ECC 6, the username of latesh aditional changes done to a workflow can be find out by option team working. I am not able to find the same option in 4.7.
Is it not available in 4.7? can somebody help here.
Thanks,

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser

Hello,
Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser & i also use youtube but not able to login any messaging option & not able to creat Email account Please Help!
Thanku
Shivam

Hey shivamr25,
Thanks for the reply.
After checking your PIN number, it shows you do not have a BlackBerry® data plan with your network service provider. This is required to use Google® Talk. Contact your network service provider to add a plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

TS4022 I am not able to use iclould with Internetexplorer.

I am not able to use iclould with Internetexplorer. I was able to until November. I have been way and on my return I can not even log in usin IE. I can using Chrome. I am an IE user so would like help please?

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

Not able to use "Fixed recepients" option

Similar Messages

Maybe you are looking for