Not able to use multiple grid function in smartview

Hi,
One of my client want to use multiple grid function in Hyperion smartview and he was using latest version of Hyperion smartview 11.1.2.5. But still that feature was not enabled in smart view.
Our's is windows environment and essbase server version 11.1.2.1 and APS version 11.1.2.1.
Can anyone please help me to resolve this issue.
Please let me know if i might missed anything or still if any info required.
Thanks in Advance.
Thanks,
Kumar.

Thanks for your help Celvin. I will try to apply the path for both APS and essbase server and will check.
Thanks once again.
Regards,
Vinay Kumar.

Similar Messages

TS1398 I have an iPad mini, because of my work network firewalls I am not able to use the airprint function to print. I was told you can direct connect to a printer. I am not sure how as I have not seen any cables for a lightning connection to a printer c

I have an iPad mini, I am connected to my work wireless connection. My printer also is on the same wireless network, however I am not able to print to my airprint enabled printer through this wireless connection. Is there a way to direct connect to the printer via a cable ?
I am missing something here on the connection. I am thinking possibly a firewall here at work will not allow me to use the airprint function. Help ?

There is no support for wired printing.
It is probably a firewall issue, possibly where all inbound communications are blocked. Since you're at work, I'd call your work IT department and find out from them what you can/can't do.

SSRS 2008R2 : Not able to use Previous aggregrate function in matrix columns cell

Hi Expert,
I have used a matrix tablix in my report. It is working fine. But when I am trying to use Previous aggregrate in one matrix column cell I get the below error:
The use of previous aggregrate function ia a tablix cell with in 'Tablix1' is not supported.
Please help me regarding that.
Thanks Rana

Hi Rana,
In your scenario, you use previous function in the “Data” cell, right? Previous function cannot be used in the overlapping parts of row group and column group. One workaround of this issue is use custom code to get the previous value.
Public Shared previous as Integer
Public Shared current as Integer
Public Shared Function GetCurrent(Item as Integer) as Integer
     previous=current
     current=Item
     return current
End Function
Public Shared Function GetPrevious()
     return previous
End Function
Then you can use the expression below in the “Data” cell to get the previous value:
=Code.GetCurrent(fields!Score.Value) & "-Previous-" & iif(Code.GetPrevious()=0,"",Code.GetPrevious())
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

2nd Try: Please Help : UIX : Not able to use messageFileUpload along with m

UIX : Not able to use messageFileUpload along with messageChoice
I used messageFileUpload UIX element and associated upload button to fileupload servlet. This servlet just captures the file and put it in desired location. This works just fine.
My client wanted me to add another choice filed on UI. I used messageChoice. I named the field as fileType. All the options have name and value populated but when I submit the form servlet is reading fileType as NULL.
I am not sure what's happening. Please let me know how should I send file handle as well fileType ?
Thanks,
Linda

What exactly are you expecting this to do for you?
Forall is designed to process batches of DML to prevent context switching from PL/SQL to SQL.
Has no relevance for what you are trying to do.
If you don't want to call the procedure multiple times, you need to rewrite it to passs the cursor to the function, then have the function process all the records.
Carl

Not able to generate multiple lines for headers in report

Hi,
I am new to BI publisher and not able to generate multiple lines for headers. Please help me to resolve.
I am using RTF template, data source as PS Query and XML file (system generated from the data source)
When I am using system generated 'First XML' file, I am getting output in the follwoing format.
TEAM_MEMBER, PROJECT_ID, NAME, START_DT
e.g.
EMP1 , 71000, Sample, 01-Jan-2010
EMP1 , 72000, Sample, 01-Feb-2010
EMP1 , 73000, Sample, 01-March-2010
But I want the report to be generate with multiple projects for one employee like below format , for that I used 'Second XML' file but I am getting blank report.
In short if there is one to many case, how to show in reports??? Please correct if I am going wrong.
TEAM_MEMBER
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
e.g.
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
**********First XML**************System generated XML ****************************
<?xml version="1.0"?>
<query numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<row rownumber="1">
<TEAM_MEMBER>TEAM_MEMBER </TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
<row rownumber="2">
<TEAM_MEMBER>TEAM_MEMBER</TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
</query>
**********Second XML**************Manually created XML and using to show multiple projects for one employee****************
<?xml version="1.0"?>
<TEST numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<TEAM_MEMBER rownumber="1">
<TEAM_MEMBER>1</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLE</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
<TEAM_MEMBER rownumber="2">
<TEAM_MEMBER>2</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLEC</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
</TEST>
Edited by: ganeshtw on Aug 25, 2010 12:14 AM

Hi,
With your first xml you can print like
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010While creating the RTF template you can use the Group by option.
<?for-each-group:ROW;./columnname> then print the column name
<?columnname?>
--Then your table format
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
<?end for-each-group?>
Thanks.

After upgrading to Lion, not able to use Quicken 2007. Get the following message: PowerPC applications are no longer supported. Anyone has a solution?

After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?

Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

Not able to use SRW.USER_EXIT in oracle forms.

Hi,
Below is my requirement in oracle forms:
I have a query form, which has Inventory Category Set field and Category 'From' and 'To' fields. Based on the values selected by the user for Category Set, possible combinations for Categories should be displayed in Cateogory 'From' and 'To' fields. Upon clicking the 'Find' button, only the items which belong to this category set and the range of Cateogies selected should be displayed.
Note that 'Item Categories' Key flex field should be used here. Number of Segments for each Category set will differ. To acheive this, I have attached the Key flex field to the Cateogory 'From' and 'To' fields.
In the PRE-QUERY trigger of the datablock, I have to use where condition to filter the items based on the category sets and categories. This where condition should be generated dynamically based on the search criteria.
In oracle report, we have provision to use the below USER_EXIT to get the where condition to append to my PRE-QUERY statement.
SRW.USER_EXIT('FND FLEXSQL CODE = "MCAT"
OUTPUT = ":P_WHERE_CAT"
APPL_SHORT_NAME= "INV"
MODE = "WHERE"
DISPLAY = "ALL"
NUM = ":P_STRUCT_NUM"
TABLEALIAS = "MCA"
OPERATOR = "BETWEEN"
OPERAND1 = ":P_CATEGORY_FROM"
OPERAND2 = ":P_CATEGORY_TO"');
But in forms, I am not able to use this USER_EXIT. Please let me know the alternate ways to get the where condition dynamically in forms.
Thank you in advance.
Regards,
Kalyan

RAISE APPLICATION_ERROR built-in is raised in a DB procedure/function or trigger.
You can write an ON-error trigger that will trap any DB error messages
or
You can use Dbms_Error_Code & Dbms_Error_Text for trapping the Error.

Is single jms broker able to use multiple httpServlets?

Hi
Is single jms broker able to use multiple httpServlets? If so then how to configure it?
The motivation for such configuration is scalability and resilience: if one broker is associated with single remote servlet then in case of the servlet failure the broker also becomes unavailable.
According to the http://docs.sun.com/source/819-0066/a_http.html a broker can be configured with an instance of a remote httpServlet but there is no information if/how it can be configured with multiple servlets.
We are currently using Sun Java System Application Server Enterprise Edition 8.1 2005Q2 UR2 (MQ product version 3.6)
regards
Mariusz

mmmm, I remember that the broker open a port, the servlet connect to that port, and you can configure the client to behavior you indicate (failover, round robin) between the configured brokers, so one servlet to many brokers...
think you will need another instance of the broker to that what you want (failover on the servlet), but...
in my experice usually the servlet is not the problem (a small tomcat, will be just fine), is the protocol it self.. it's too much overload... it make one http request for everything, I was not happy with the scalabilty, soo I maje my own servlet that take several messages from the broker, package them and wait for the client, it improve a lot the traffic..
salut!

I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.

I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.at various times it asks different passwords.

Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.

I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

TS1398 After upgrade to iOS 6 i am not able to use wifi.

Connected, but no wifi traffic (at home).
After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
Can not connect at all (at work).
Thank you for helpfull advice.
Vladimir
Please do not give me advice like:
switch proxy to auto
turn the flight mode on and off
turn the iphone on and off
release the ip
recovery the network settings
recovery firmware
I have tried all these, but did not work.
PS to apple:
I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!

This helped me solve the problem:
I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
Targat

My mac's launchpad is working but i am not able to use the apps that are provided in the launchpad

my mac's launchpad is working but i am not able to use the apps that are provided in the launchpad

Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/

Not able to use multiple grid function in smartview

Similar Messages

Maybe you are looking for