Not able to use nmConnect command to connect to nodemanager using wlst
Hi,
I have configured SSL between the admin server and the managed servers successfully and my admin and managed servers are running fine on SSL ports. I am also able to connect to admin server using the wlst like below:
wls:/offline> connect('adminportal','adminportal','t3s://172.21.74.139:7012')
Connecting to t3s://172.21.74.139:7012 with userid adminportal ...
Successfully connected to Admin Server 'TestingDomain' that belongs to domain 'TEST_DOMAIN'.
But when I am trying to connect to node manager using the nmConnect command then I am not able to connect to it. Even I am getting some stupid exception which even i don't think is the cause of the problem. Below are the logs. My question is also like is there any patch that i need to apply to use nmConnect over SSL? Also after disabling the SSL i m able to use the nmConnect to connect to node manager. Please advice furthur.
wls:/offline> nmConnect('B2shNIRZrg','xJ0rgpyPGd','172.21.74.131','5556','TEST_DOMAIN','SSL')
Connecting to Node Manager ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1379, in nmConnect
WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager.I/O error while reading domain directory: java.io.FileNotFoundException: Domain directory '/home/hosting/vguptr5/bea10mp2/wlserver_10.0/common/nodemanager/SSL' invalid (domain salt file not found) Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Mon Nov 15 23:36:50 GMT+05:30 2010.
weblogic.nodemanager.NMException: I/O error while reading domain directory: java.io.FileNotFoundException: Domain directory '/home/hosting/vguptr5/bea10mp2/wlserver_10.0/common/nodemanager/SSL' invalid (domain salt file not found)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:298)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:311)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:247)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:196)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:202)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:49)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
at org.python.core.PyMethod.__call__(PyMethod.java:96)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.PyObject.invoke(PyObject.java:2016)
at org.python.pycode._pyx4.nmConnect$83(<iostream>:1366)
at org.python.pycode._pyx4.call_function(<iostream>)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:404)
at org.python.core.PyFunction.__call__(PyFunction.java:184)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.pycode._pyx31.f$0(<console>:1)
at org.python.pycode._pyx31.call_function(<console>)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.core.Py.exec(Py.java:1157)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:148)
at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter.java:89)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:70)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:44)
at weblogic.management.scripting.WLST.main(WLST.java:157)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.WLST.main(WLST.java:29)
weblogic.nodemanager.NMException: I/O error while reading domain directory: java.io.FileNotFoundException: Domain directory '/home/hosting/vguptr5/bea10mp2/wlserver_10.0/common/nodemanager/SSL' invalid (domain salt file not found)
Thanks
Rahul Gupta
Hi,
the error invalid "*domain salt file not found*" shows that you need to do the nmEnroll() first from the machine through which you are trying to do the nmEnroll().
The error shows that the security encryption file serializedsystemIni.dat file which is used in encryption and decryption.
This error is not at all related to SSL configuration.
thanks,
Sandeep
Similar Messages
-
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
21 September, 2014, from India.
MD513AE/A iPad Wi-Fi-16GB White - Model A 1458
I have purchase this from Dubai, UAE, some 2 years back.
I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.
After some times the ‘Apple’ icon comes in. Tried simultaneous operation of Sleep and Power buttons, but of no use.
Sometimes a picture of cable and ITunes comes in; but not able to connect to
P C as there is no battery charge.Hi madhu254,
Thank you for visiting Apple Support Communities.
If your iPhone is not charging, please check out this article.
iPhone and iPod touch: Charging the battery
There's a Resolving issues section, but you may want to read it all.
Best regards,
Nubz -
Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??
I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.
-
Not Able to Promote DC to server even i am using built in Administrator Account.
hi,
i am facing below mentioned issue from last 4 to 5 days and i am very frustrating about this error and nobody give me a proper solution. if any anybody facing this kind of issue please give me a solution this will very helpful for me.
"Windows Server 2012 domain controllers have a default for the security setting named "Allow cryptography algorithms compatible with Windows NT 4.0" that prevents weaker cryptography algorithms when establishing security channel sessions."
Thanks & Regards,
Sushant Chavan.Hi Sushant,
>>Not Able to Promote DC to server even i am using built in Administrator Account.
I have seen your thread "Verification of prerequisites for Domain Controller promotion failed" and provided a reply.
Verification of prerequisites for Domain Controller promotion failed
http://social.technet.microsoft.com/Forums/en-US/23f33ffa-a847-47bc-81d4-569f8e195886/verification-of-prerequisites-for-domain-controller-promotion-failed?forum=winserver8gen
In the reply, it provides a step-to-step guidance for setting up a Windows Server 2012 Domain Controller. Have we followed it to promote the server?
Best regards,
Frank Shen -
I am not able to log into FaceBook on my macbook pro using my Apple ID
I am not able to log into FaceBook on my macbook pro using my Apple ID
Then, what razmee209 says. It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.
-
Hi,am not able to open PDF Files in Mozilla Firefox without using plugins...I need Solution
Hi,am not able to open PDF Files in Mozilla Firefox without using plugins...I need Solution
Hello,
Please see the support article below for full information on viewing PDF in Firefox:
[[View PDF files in Firefox without downloading them]]
If you want to use Firefox's built in PDF viewer (i.e. not a plugin) then you will need to ensure that any PDF plugins are uninstalled from Firefox and that 'Preview in Firefox' is selected as the Action for PDF files (see screenshot below).
I hope that helps. Let me know if not. -
My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?
Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected. -
Hi I was trying to join two Ractangle Tool objects but getting this type of Error in illustrator cs6 :-
The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group).
You can use Join command to connect two or more paths, paths in groups; ot to close an open path.
Please assist me asap.Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This sound like a firewall issue. I would start by disabling the firewall and seeing if you can connect. If this works then you know where the problem is,
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!
Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
(ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
(iii) ADRMS Running on Windows Server 2008.
(iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer. -
Not able to open MS Excel attachment in the email Using SO_NEW_DOCUMENT_ATT
Hi, I am not able to open the attached MS excel in the mail its giving error as "Problems came up in the following areas during load Table". My requirement is to send a colored excel as attachment through mail when the program is executed in background. For this i have reffered the following link " http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment". That is i have used the XML method for this . I would be thankful if you can let me know where i am doing the mistake For refference i am pasting my code: * Send mail when executed in background mode IF sy-batch eq 'X'. PERFORM send_mail_bkgrnd. ELSE. " Foreground mode PERFORM build_layout. PERFORM build_field_cat. PERFORM display. ENDIF. FORM SEND_MAIL_BKGRND . PERFORM process_xml_data. PERFORM disatch_mail. ENDFORM. " SEND_MAIL_BKGRND &---- *& Form PROCESS_XML_DATA &---- FORM PROCESS_XML_DATA . DATA lv_xlwidth TYPE i. * Creating a ixml Factory l_ixml = cl_ixml=>create( ). * Creating the DOM Object Model l_document = l_ixml->create_document( ). * Create Root Node 'Workbook' l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ). l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ). ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ). l_element_root->set_attribute_node( ns_attribute ). ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ). l_element_root->set_attribute_node( ns_attribute ). * Create node for document properties. r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ). l_value = sy-uname. l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ). * Styles r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ). * Style for Header r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ). r_format = l_document->create_simple_element( name = 'Font' parent = r_style ). r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ). r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ). r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ). r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ). r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ). r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Style for Data "Color properties are set over here r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Worksheet r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ). r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ). * Table r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ). r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ). r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ). * Column Formatting DO 32 TIMES. CASE sy-index. WHEN 1. lv_xlwidth = '300'. WHEN 2. lv_xlwidth = '300'. WHEN OTHERS. lv_xlwidth = '300'. ENDCASE. PERFORM clmn_formatting USING lv_xlwidth. ENDDO. * Blank Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). * Column Headers Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ). * VC. No. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'VC No.' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). * Source r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'Source' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). DO 30 TIMES. * * TPLGRP r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = '' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). ENDDO. * Blank Row after Column Headers r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ). ENDDO. * Data Table CLEAR gs_output. LOOP AT gt_output INTO gs_output. r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. CASE sy-index. WHEN 1. a_dvalue = gs_output-vc_number. WHEN 2. a_dvalue = gs_output-source. WHEN 3. a_dvalue = gs_output-tplgrp_01. WHEN 4. a_dvalue = gs_output-tplgrp_02. WHEN 5. a_dvalue = gs_output-tplgrp_03. WHEN 6. a_dvalue = gs_output-tplgrp_04. WHEN 7. a_dvalue = gs_output-tplgrp_05. WHEN 8. a_dvalue = gs_output-tplgrp_06. WHEN 9. a_dvalue = gs_output-tplgrp_07. WHEN 10. a_dvalue = gs_output-tplgrp_08. WHEN 11. a_dvalue = gs_output-tplgrp_09. WHEN 12. a_dvalue = gs_output-tplgrp_10. WHEN 13. a_dvalue = gs_output-tplgrp_11. WHEN 14. a_dvalue = gs_output-tplgrp_12. WHEN 15. a_dvalue = gs_output-tplgrp_13. WHEN 16. a_dvalue = gs_output-tplgrp_14. WHEN 17. a_dvalue = gs_output-tplgrp_15. WHEN 18. a_dvalue = gs_output-tplgrp_16. WHEN 19. a_dvalue = gs_output-tplgrp_17. WHEN 20. a_dvalue = gs_output-tplgrp_18. WHEN 21. a_dvalue = gs_output-tplgrp_19. WHEN 22. a_dvalue = gs_output-tplgrp_20. WHEN 23. a_dvalue = gs_output-tplgrp_21. WHEN 24. a_dvalue = gs_output-tplgrp_22. WHEN 25. a_dvalue = gs_output-tplgrp_23. WHEN 26. a_dvalue = gs_output-tplgrp_24. WHEN 27. a_dvalue = gs_output-tplgrp_25. WHEN 28. a_dvalue = gs_output-tplgrp_26. WHEN 29. a_dvalue = gs_output-tplgrp_27. WHEN 30. a_dvalue = gs_output-tplgrp_28. WHEN 31. a_dvalue = gs_output-tplgrp_29. WHEN 32. a_dvalue = gs_output-tplgrp_30. ENDCASE. PERFORM fill_data_val_excel USING a_dvalue. ENDDO. CLEAR gs_output. ENDLOOP. * Creating a Stream Factory l_streamfactory = l_ixml->create_stream_factory( ). * Connect Internal XML Table to Stream Factory l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ). * Rendering the Document l_renderer = l_ixml->create_renderer( ostream = l_ostream document = l_document ). l_rc = l_renderer->render( ). * Saving the XML Document l_xml_size = l_ostream->get_num_written_raw( ). ENDFORM. " PROCESS_XML_DATA &---- *& Form DISATCH_MAIL &---- FORM DISATCH_MAIL . DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE. DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE. DATA: objbin LIKE solix OCCURS 10 WITH HEADER LINE. DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE. DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE. DATA: doc_chng LIKE sodocchgi1. DATA: tab_lines LIKE sy-tabix. DATA: l_num(3). DATA: subj_date(10) TYPE c. * Mail Subject data lv_date TYPE d. lv_date = sy-datum. CONCATENATE lv_date6(2) '-' lv_date4(2) '-' lv_date+0(4) INTO subj_date. CONCATENATE 'SAP Application Usage Report ' subj_date INTO doc_chng-obj_descr SEPARATED BY space. * Mail Contents objtxt = 'Dear User,'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CONCATENATE 'Please find the attached SAP Application Usage Report for ' subj_date INTO objtxt SEPARATED BY space. " Mail Contents APPEND objtxt. CLEAR objtxt. APPEND objtxt. objtxt = 'Thanks & Regards,'. APPEND objtxt. objtxt = 'Himanshu Kanekar'. APPEND objtxt. DESCRIBE TABLE objtxt LINES tab_lines. READ TABLE objtxt INDEX tab_lines. doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ). * Packing List For the E-mail Body objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. APPEND objpack. * Creation of the Document Attachment LOOP AT l_xml_table INTO wa_xml. CLEAR objbin. objbin-line = wa_xml-data. APPEND objbin. ENDLOOP. DESCRIBE TABLE objbin LINES tab_lines. objhead = 'SAP Login Details'. APPEND objhead. * Packing List For the E-mail Attachment objpack-transf_bin = ''."'X'. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. CONCATENATE 'SAP_Login_Details' subj_date INTO objpack-obj_descr SEPARATED BY space. objpack-doc_type = 'XLS'. objpack-doc_size = tab_lines * 255. APPEND objpack. * Target Recipent CLEAR reclist. reclist-receiver = reclist-rec_type = 'U'. APPEND reclist. * Sending the document CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng put_in_outbox = 'X' commit_work = 'X' TABLES packing_list = objpack object_header = objhead contents_txt = objtxt contents_hex = objbin receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 operation_no_authorization = 4 OTHERS = 99. ENDFORM. " DISATCH_MAIL
Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/ -
Not able to pass portal login page with valid credentials using WebDispatch
Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm -
About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?
About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary -
Not able to create a text file in Client Machine using Forms 10g
Hi - I'm mot able to create a text file in Client Machine using Forms 10g. I'm getting error when system executes the bolded line.(i.e. CLIENT_TEXT_IO.FOPEN). During run-time system is throwing "ORA-06508: PL/SQL: could not find program unit being called".
I had attached webutil.pll in the form.
Please advise me.
DECLARE
l_Temp CLIENT_TEXT_IO.FILE_TYPE;
LC$Name Varchar2(100) ;
LC$Fic Varchar2(100) ;
LN$Lines Pls_integer := 0 ;
LC$Line Varchar2(4000) ;
Cursor C_CUR Is
Select * From TEST_TEXTIO where rownum <= 50;
BEGIN
LC$Name := 'tmp_file.txt' ;
LC$Fic := 'c:\temp\tmp_file.txt';
Begin
l_temp := CLIENT_TEXT_IO.FOPEN( 'C:\temp\tmp_file.txt', 'W');
Exception
when others then
message( 'OPEN FILE ERROR ' || LC$Fic ||sqlerrm );
display_error;
raise form_trigger_failure;
End ;
-- Write the lines --
For Cur In C_CUR Loop
LC$Line := Cur.CODE || ' -> ' || Cur.COL1 || ',' || Cur.COL2 || ',' || Cur.Col3 ;
CLIENT_TEXT_IO.PUT_LINE( LF$File, LC$Line ) ;
LN$Lines := C_CUR%ROWCOUNT ;
End loop ;
-- Close the file --
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
Exception
When others Then
message('err='||sqlerrm);message(' ');
display_error;
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
Raise ;
END;
Thanks.
ArunHi ,
i have one Question though its not related to thos question if some could help me it will be really helpful,
i have created one program to import and export excel to forms vice versa, if the form is attached with webutil its working fine am using ole2.but i have a new idea if i add this program in menu, it can be used for all the forms attched to that menu, i made program also, but problem am facing right now is if the form is not attched with webutil it will not work so is there possiblity to share my webutil from one form to another form ,so i will keep one form as a interface form in that webutil will be attched ,i can share that webutil to all other forms so that all the forms no need to attach webutil again
if its possible means please suggest some ideas -
Not able to upload file in DMS(Document Mang. system) using Web dynpro ABAP
Hi All,
I am facing a problem while uploading the file into the DMS ( Document Management System ) from Webdnrpo .
I am using the BAPI - BAPI_DOCUMENT_CREATE2 to create the document .
CASE - 1
when i am providing the storage category mention below and no data carrier1
ls_documentfiles-storagecategory = 'ZHMEL_CS'. it is not able to upload the document in the DMS system and when i check
in the debugg mode it giving error as ""Error while checking in and storing: C:\TEST.TXT "" .
CASE - 2
When i am not using the storage category and providing the the data carrier as default
ls_documentdata-DATACARRIER1 = 'DEFAULT'. It is able to create the document in the DMS but i am not able to read that document .
I checked with DMS Consultant that DMS is configured for ZOL ( documenttype) with a storage category as 'ZHMEL_CS'.
The code which i have used is below :
ls_documentdata-documenttype = 'ZOL'.
ls_documentdata-documentversion = '00'.
ls_documentdata-documentpart = '000'.
ls_documentdata-description = 'Test Document'.
ls_documentdata-laboratory = '001'.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentdata-DOCFILE1 = 'C:\TEST.TXT'.
ls_documentdata-SAVEDOCFILE1 = 'C:\TEST.TXT'.
*ls_documentdata-FILESIZE1 = 000000000000.
*ls_documentdata-FILESIZE2 = 000000000000.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentfiles-DOCUMENTTYPE = 'ZOL'.
ls_documentfiles-DOCUMENTPART = '000'.
ls_documentfiles-DOCUMENTVERSION = '00'.
ls_documentfiles-storagecategory = 'ZHMEL_CS'.
ls_documentfiles-WSAPPLICATION = 'TXT'.
ls_documentfiles-DOCPATH = 'C:\'.""lv_filename.
ls_documentfiles-DOCFILE = 'TEST.TXT'."lv_filename.
ls_documentfiles-description = 'Test Document'.
ls_documentfiles-language = 'EN'.
ls_documentfiles-CHECKEDIN = 'X'.
APPEND ls_documentfiles to lt_documentfiles .
*&----Fill Descriptions
w_descr-language = 'EN'.
w_descr-language_iso = 'EN'.
w_descr-description = 'Test'.
append w_descr to lt_descr.
clear w_descr.
**w_hostname = 'HMEL-DV1R3_DR3_00'.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_documentdata
*hostname = 'content-srv'
*pf_http_dest = 'SAPHTTPA'
*pf_ftp_dest = 'SAPFTPA'
IMPORTING
DOCUMENTNUMBER = lv_DOCUMENTNUMBER
return = gv_return
TABLES
documentdescriptions = lt_descr
documentfiles = lt_documentfiles.
Please let me know your valuable inputs on the same ..
Edited by: Omm Awasthi on Dec 30, 2010 12:22 AM
Edited by: Omm Awasthi on Dec 30, 2010 12:25 AMHi omm , from functional side your require a document type and content repository
I have used below code in a function module to create document , we have create object link as PO to the doc.
FUNCTION ZFM_SR_CREATE_FROM_EXTERNAL .
""Local Interface:
*" IMPORTING
*" VALUE(IV_DOCUMENTNUMBER) TYPE DOKNR OPTIONAL
*" VALUE(IV_DOCUMENTTYPE) TYPE DOKAR OPTIONAL
*" VALUE(IV_DOCUMENTVERSION) TYPE DOKVR OPTIONAL
*" VALUE(IV_DOCUMENTPART) TYPE DOKTL_D OPTIONAL
*" VALUE(IV_STORAGE_CAT) TYPE CV_STORAGE_CAT OPTIONAL
*" VALUE(IV_DOKST) TYPE DOKST OPTIONAL
*" VALUE(IT_DM_FILES) TYPE ZDM_TT_FILES OPTIONAL
*" VALUE(IV_EBELN) TYPE EBELN
*" EXPORTING
*" VALUE(EV_DOCUMENTNUMBER) TYPE DOKNR
*" VALUE(ES_RETURN) TYPE BAPIRET2
V00.00 DD.MM.YYYY *
*********************New Method of Uploading File*********************************
CONSTANTS path_name TYPE dms_path
VALUE '/tmp/'.
CONSTANTS log TYPE dms_path VALUE '/tmp/logFO.txt'.
DATA: ls_draw TYPE bapi_doc_draw2,
lt_documentfiles TYPE TABLE OF bapi_doc_files2,
ls_documentfiles TYPE bapi_doc_files2,
ls_dm_files TYPE zdm_files,
lv_filename TYPE string,
lv_ext TYPE string,
lv_file_type TYPE draw-dappl,
lv_file_name TYPE dms_path,
lv_msg(80) TYPE c,
lt_objectlinks TYPE TABLE OF bapi_doc_drad,
ls_objectlinks TYPE bapi_doc_drad,
lv_ebelp TYPE ebelp
Prepare Data
MOVE iv_documentnumber TO ls_draw-documentnumber.
MOVE iv_documenttype TO ls_draw-documenttype.
MOVE iv_documentversion TO ls_draw-documentversion.
MOVE iv_documentpart TO ls_draw-documentpart.
ls_draw-statusextern = iv_dokst.
ls_draw-statusintern = iv_dokst.
ls_draw-username = sy-uname.
LOOP AT it_dm_files INTO ls_dm_files.
SPLIT ls_dm_files-filepath AT '.' INTO lv_filename lv_ext.
CALL FUNCTION 'CV120_DOC_GET_APPL'
EXPORTING
pf_file = ls_dm_files-filepath
IMPORTING
pfx_dappl = lv_file_type.
TRANSLATE lv_file_type TO UPPER CASE.
OPEN DATASET log FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER lv_ext TO log.
ls_documentfiles-wsapplication = lv_file_type.
TRANSLATE ls_documentfiles-wsapplication TO UPPER CASE.
CONCATENATE path_name
lv_filename
lv_ext
INTO lv_file_name.
CONDENSE lv_file_name NO-GAPS.
TRANSFER lv_file_name TO log.
OPEN DATASET lv_file_name FOR OUTPUT IN BINARY MODE MESSAGE lv_msg.
*Transfer Attachment Content to Application Server
TRANSFER ls_dm_files-content TO lv_file_name.
CLOSE DATASET lv_file_name.
TRANSFER 'move data to lt_files' TO log.
ls_documentfiles-storagecategory = iv_storage_cat.
ls_documentfiles-docfile = lv_file_name.
ls_documentfiles-DOCUMENTVERSION = IV_DOCUMENTVERSION.
APPEND ls_documentfiles TO lt_documentfiles.
CLEAR lv_file_name.
CLOSE DATASET log.
ENDLOOP.
IF iv_ebeln IS NOT INITIAL.
ls_objectlinks-objecttype = 'EKPO'.
SELECT SINGLE ebelp INTO lv_ebelp FROM ekpo WHERE
ebeln = iv_ebeln
AND loekz eq space.
CONCATENATE iv_ebeln lv_ebelp INTO ls_objectlinks-objectkey.
APPEND ls_objectlinks TO lt_objectlinks.
ENDIF.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_draw
pf_ftp_dest = 'SAPFTPA'
pf_http_dest = 'SAPHTTPA'
IMPORTING
documentnumber = ev_documentnumber
return = es_return
TABLES
objectlinks = lt_objectlinks
documentfiles = lt_documentfiles.
DATA: ls_doc_data type bapi_doc_draw2,
ls_doc_datax type bapi_doc_drawx2,
ls_return type bapiret2.
Set value for document data
ls_doc_data-statusextern = 'IW'.
ls_doc_data-statusintern = 'IW'.
Set value for document data check
ls_doc_datax-statusextern = 'X'.
ls_doc_datax-statusintern = 'X'.
CALL FUNCTION 'BAPI_DOCUMENT_CHANGE2'
EXPORTING
DOCUMENTTYPE = 'ROS'
DOCUMENTNUMBER = IV_DOCUMENTNUMBER
DOCUMENTPART = IV_DOCUMENTPART
DOCUMENTVERSION = IV_DOCUMENTVERSION
DOCUMENTDATA = ls_doc_data
DOCUMENTDATAX = ls_doc_datax
HOSTNAME =
DOCBOMCHANGENUMBER =
DOCBOMVALIDFROM =
DOCBOMREVISIONLEVEL =
SENDCOMPLETEBOM = ' '
pf_ftp_dest = 'SAPFTPA'
pf_http_dest = 'SAPHTTPA'
CAD_MODE = ' '
ACCEPT_EMPTY_BOM = ' '
IMPORTING
RETURN = ls_return
TABLES
CHARACTERISTICVALUES =
CLASSALLOCATIONS =
DOCUMENTDESCRIPTIONS =
OBJECTLINKS =
DOCUMENTSTRUCTURE =
DOCUMENTFILES = lt_documentfiles.
LONGTEXTS =
COMPONENTS =
move es_return to ES_RETURN.
IF es_return-type CA 'EA' ."NE 'E' AND es_return-type NE 'A'.
"do nothing
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
LOOP AT lt_documentfiles INTO ls_documentfiles.
DELETE DATASET ls_documentfiles-docfile.
ENDLOOP.
ENDFUNCTION.
Maybe you are looking for
-
IPhone 3GS very thin cracks on the coating
I have an iPhone 3GS 32GB White that is five days old and i have noticed that around the speaker and microphone and around the sim tray there are very small cracks. At first i thought it was the plastic but after a closer inspection with the help of
-
Need some help logic keeps crashing
here is my error report i would really like to keep working on this project as its weeks worth of time ive spent on it any help will be appreciated my problem first started when i hit the reorganize memory button in song information, it told me i had
-
Energy Saver - timer on putting the computer to sleep doesn't work anymore
After a major crash on my iMac G5 (iSight), my iMac has stopped to go into sleep mode automatically after a set time. Think it is was a crash after using aperture and connected to a Sony K700i phone. Tried disconnect all the USB device and deleted so
-
Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards.
Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards. So far nobody has been able tot tell me the cause of this problem. The body is still quite new (15000 pics taken).
-
this is,we've encountered the following issues. installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem. please,help me!