Not able to use password with characters for RFC User.

hi All,
I have installed SAP SCM 5.0 with MaxDB 7.6and liveCache 7.6.
I created RFC user and RFC destination to administer liveCache globally as per SAP notes 305634 and 452745. I changed the initial passwords and tested Remote login for RFC User.
But when I try to start liveCache with startrfc following the link below
http://help.sap.com/erp2005_ehp_04/helpdata/EN/95/379f3cad1e3251e10000000a114084/frameset.htm
I got the following error
RFC Call/Exception: SYSTEM_FAILURE
Group       Error group 104
Key         RFC_ERROR_SYSTEM_FAILURE
Message     Name or password is incorrect (repeat logon)
Then I logged into the CI with RFC user and try to start the liveCache with RSLVCSTART T-Code SE38..I got the following error.
Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LCS on server saplcslc
Message no. LVC007
I tried by changing the password for RFC user to numeric [0-9] and special characters [$,:] which worked fine.
Does anyone faced this issue earlier? I searched notes, sdn and finally google ... but no luck to resolve the issue.
Your help is much appreciated.
Thanks,
Venkat

Yes I used LCA as liveCache connection. I resolved the issue with RSLVCSTART. Thanks for your suggestion to run connection test. I used wrong password for control user in the LCA connection. Now LCA connection shows everything is fine.
But I am still not able to use alphanumeric password RFC user to start the liveCache from command line. I get the following when run startrfc command...
bash-3.00$ /usr/sap/CAT/rfcsdk/bin/startrfc -3 -d LCSCLNT001 -h sapcatci -s 51 -c 001 -u LCSRFC -p Mach1cspsap\$ -l EN -F START_LIVECACHE_LVC -E IV_CON_NAME=LCA
RFC Call/Exception: SYSTEM_FAILURE
Group       Error group 104
Key         RFC_ERROR_SYSTEM_FAILURE
Message     Name or password is incorrect (repeat logon)
bash-3.00$ echo $?
1
But I can start the liveCache from command line with numeric password successfully.
bash-3.00$ /usr/sap/CAT/rfcsdk/bin/startrfc -3 -d LCSCLNT001 -h sapcatci -s 51 -c 001 -u LCSRFC -p 19811983\$ -l EN -F STOP_LIVECACHE_LVC -E IV_CON_NAME=LCA
bash-3.00$ echo $?
0
Note the difference between the passwords used. Do i need to change any settings to accept alphanumeric passwords for RFC user.
Note that I am able to start liveCache server in both cases(alphanumeric password and numeric password) by logging into SAP GUI and RSLVCSTART program. The problem is only when i try to start the liveCache from the commandline.
Any help will be much appreciated.
Thanks,
Venkat

Similar Messages

  • TS4022 I am not able to use iclould with Internetexplorer.

    I am not able to use iclould with Internetexplorer.  I was able to until November.  I have been way and on my return I can not even log in usin IE.  I can using Chrome.  I am an IE user so would like help please?

    This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

  • HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    Not really sur easy you would be having that problem.  Mine works.  You might try RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

  • I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

    I would like to use Firefox with Sharepoint.
    However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

    This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

  • Not able to use Bluetooth with Mitsubishi Outlander (2014)

    I have a new iPhone 6 with iOS ver: 8.1.3 and I am able to pair the phone with the car (Bluetooth) system, Bluetooth says it's connected, but I am unable to make/receive calls using Bluetooth. On the phone it shows that it is connected via Bluetooth, but it is not as the call is being carried out via the actual headset not the Bluetooth.  Every other phone works without any issues so I know this is not a car problem as I've tested several devices,  iPhone is the only device that is not  able to maintain proper Bluetooth connection. I've googled this and apparently this is widespread issue, so the question is, when will Apple issue a proper fix for this.
    I've tried resetting network settings as well as deleting bluetooth devices and doing a new pairing procedure but no luck.
    Please provide some feedback when this can be resolved, hopefully with the new software release cause I've never been so upset like I am right now after spending that much money on the phone that doesn't work properly.

    Hey there Andriy,
    Welcome to Apple Support Communities.
    It sounds like you’ve done quite a bit of troubleshooting in an attempt to resolve the issue making and receiving calls with your iPhone 6 that is connected to your car stereo with Bluetooth. If you haven’t already, try the general troubleshooting suggestions in the article linked below.
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Ciao,
    -Jason

  • Not able to use date with time in sql query

    Hi,
    select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id,b.creation_date
    from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
    where a.id = b.dnz_chr_id
    and b.cle_id is not null
    and a.contract_number_modifier is not null
    and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
    and b.creation_date between to_date('21-10-2013 9:19:48','DD-MM-YYYY HH24:MI:SS')  and  sysdate;
    If I execute this query in toad it is giving me proper results.This query populates the results between the two date with time.
    But I am facing issue when I am using this query in the procedure. The procedure is as below.
    If I use the same query in the procedure I am getting wrong output.
    CREATE OR REPLACE procedure xx_prog_upd_annualized_amt(errbuf out varchar2, retcode out varchar2)
    as
    cursor c1 (l_date in varchar2)is
    select a.contract_number,b.start_date,b.end_date,b.price_negotiated,b.attribute_category,b.attribute1,a.sts_code,a.contract_number_modifier,b.cle_id
    from OKC_K_HEADERS_ALL_B a,OKC_K_LINES_B b
    where a.id = b.dnz_chr_id
    and b.cle_id is not null
    and a.contract_number_modifier is not null
    and a.sts_code in ('ACTIVE','SIGNED','60 DAY HOLD','HOLD')
    and b.creation_date between  to_date(l_date,'DD-MM-YYYY HH24:MI:SS')  and  sysdate;
    v_date varchar2(100);
    v_total_days number;
    v_annualized_amount number;
    begin
    begin
    select max(fcr.actual_start_date) into v_date
    from fnd_concurrent_programs_vl fcp
    ,fnd_concurrent_requests fcr
    where fcp.concurrent_program_id = fcr.concurrent_program_id
    and fcp.user_concurrent_program_name like 'Renewed Annualized Amount Updation';
    exception
    when others then
    fnd_file.put_line(fnd_file.log,'Invalid date');
    end;
    fnd_file.put_line(fnd_file.output,v_date);
    fnd_file.put_line(fnd_file.output,sysdate);
    fnd_file.put_line(fnd_file.output,'***************Start of Program***************');
    fnd_file.put_line(fnd_file.output,'***************Hi***************');
    For i in c1(v_date) loop
    SELECT
             1
           + 30 * TRUNC (MONTHS_BETWEEN ( TO_DATE (i.end_date, 'DD-MON-YYYY'),  TO_DATE (i.start_date, 'DD-MON-YYYY')))
           + LEAST (EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')), 30)
           - LEAST (EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')), 30)
           + CASE
                WHEN EXTRACT (DAY FROM TO_DATE (i.end_date, 'DD-MON-YYYY')) < EXTRACT (DAY FROM TO_DATE (i.start_date, 'DD-MON-YYYY')) THEN 30
                ELSE 0
             END
              daysbetween into v_total_days
      FROM dual;
      fnd_file.put_line(fnd_file.output,i.contract_number);
      fnd_file.put_line(fnd_file.output,v_total_days);
      If v_total_days < 360 then
      v_annualized_amount := (360*i.price_negotiated)/v_total_days;
      update OKC_K_LINES_B
      set attribute_category = 'Annualized Amount',attribute1 = v_annualized_amount
      where cle_id = i.cle_id;
       fnd_file.put_line(fnd_file.output,v_annualized_amount);
        fnd_file.put_line(fnd_file.output,i.cle_id);
        elsif v_total_days >= 360 then
      update OKC_K_LINES_B
      set attribute_category = 'Annualized Amount',attribute1 = i.price_negotiated
      where cle_id = i.cle_id;
      end if;
    end loop;
    commit;
    fnd_file.put_line(fnd_file.output,'***************End of Program***************');
    null;
    end;

    SureshM wrote:
    Hi Purvesh,
    Apologize for not giving the sufficient information.
    max(fcr.actual_start_date) = here I am getting date with time (for eg :9/4/2012 6:47:49 PM)
    Datatype for this column is date.
    This actual start date I am storing in varchar2 variable and then converting this value to date with time.
    My requirement is to pick the rows between the two timestamps which I am unable to do in the procedure.
    Regards
    Suresh
    YOu are losing the Time information while fetching the data into a VARCHAR2 variable. change the datatype of v_date to DATE and get rid of the TO_DATE logic in cursor and simply use v_date variable.
    Message was edited by: PurveshK misread.

  • Query regarding OdiInvokeWebService, not able to use it with any webservice

    I am trying to invoke a webservice using the OdiInvokeWebservice, but not able to do that, tried with 11.1.1.6 and 11.1.1.5
    any one tried that before in the following version ?
    Please help !!
    Regards,
    Uday

    What did Orange say when you requested them to unlock the iPhone?
    You have to request an unlock - it is not automatic after a period of time.

  • Excel opens and does not close when using the OI classes for some users...

    Hello Experts,
    I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.

    Viraylab,
    Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
    Regards,
    Kiran Bobbala

  • Not Able To Use Acrobat With Updates

    Hello,
    When I slipstream all the quarterly updates through 9.5.5 into an original installation of Acrobat Pro 9 Extended which is version 9.0 the installer loads as version 9.5.5 and successfully installs Acrobat as a version 9.5.5 but when I open Acrobat and accept the license agreement I immediately receive a popup message that says the program is broke and cannot be used due to license discrepancies to reinstall it then when I click OK or terminate the process that generated the message Acrobat closes. If I install Acrobat as version 9.0 and manually apply the updates through 9.5.5 Acrobat works with no problems. Any assistance in helping me resolve the problem would be appreciated.
    My reason for wanting to install version 9.0 as version 9.5.5 is I thought it might take up less space on my hard drive but it doesn't it still uses about 4.6GB of space which is significantly more than any other program on my computer. When I tried customizing the installation with the customization tool by selecting do not copy the installation files to the hard drive Acrobat still created over a gigabit of installer files in the installer folder in the Windows directory and created over a gigabit of update files in its folder under programs. Acrobat is quite a pig isn't it I am saddened to see that this is what hard drive space is being used for in world of larger hard drives. I would like to see programs like Acrobat function with 500 characters of code or less. That would be intuitive wouldn't it.
    Sincerely,  

    I have never heard of slipstreaming the updates with the original install, only with updates themselves. I suspect that may be related in some sense, but just a guess.

  • Not able to use sky drive pro for sharepoint 2013

    Hi Friends,
    recently i have updated my sharepoint farm to sharepoint 2013 from sharepoint 2010.. due to some reasons I have not visually upgraded a site to sp2013 visual effects but all other sites have been visually upgraded. now, when I try to sync the doc lib
    of the site(which is not visually upgraded) I get an error saying this site is running in sp2010 mode hence we cannot sync this doc lib using sky drive pro....I tried to sync it using sharepoint workspace also but still no luck.can any one help me?
    this same doc lib is getting synced to my friend system but not my system.i dunno why.please help

    Hi,
    Yes, it is expected that we cannot sync SharePoint 2010 sites (non-upgraded) with Sky Drive Pro because of the October 2013 update to SkyDrive Pro (KB2825633). However, it should be OK with Sharepoint Workspace.
    I will have a test to check how to sync in this scenarios. In the meanwhile, you can also create a service request with Microsoft on this product issue and they will provide fast help.
    SkyDrive Pro update enforces SharePoint version requirement
    http://blogs.technet.com/b/sharepointclient/archive/2013/11/06/latest-skydrive-pro-update-enforces-sharepoint-version-requirement.aspx
    You can't sync a SharePoint 2010 library to OneDrive for Business 2013http://support.microsoft.com/kb/2904784
    Miles LI TechNet Community Support

  • Not able to use TextBox with Border (JavaFx 2.0)

    final BorderPane border = new BorderPane();
    Label label1 = new Label("Name:");
    TextBox textBox = new TextBox ();
    HBox hb = new HBox();
    hb.getChildren().addAll(label1, textBox);
    hb.setSpacing(10);
    border.setCenter(hb);
    root.getChildren().add(border);
    The above code is not working as expected as the text box is in disabled state always. I am new to JavaFx 2.0 and any help/guidance is highly appreciated. Thanks in advance.

    It works for me.
    Update your javafx2.0 sdk.
    TextBox is deprecated.
    Use TextField textBox = new TextField ();

  • Not able to use macro with LDB PNPCE

    Hi,
    I am trying to use macro 'rp-provide-from-last' as below with LDB PNPCE.But syntax error 'unable to  interpret SPACE' has occurred.
    rp-provide-from-last p0001 space pn-begda pn-endda.
    Please let me know how to use this macro with LDB PNPCE.

    The reason you are getting this error is that you would have used the GET Pernr. in start of selection.For PNPCE u have to define
    Nodes : person, peras.
    and then use the
    Get PERSON.
    Get PERAS in start of selection
    and then u can use the standard macros without any errors.

  • Not able to use webcam with 1.0 USB

    Is there any way to use a webcam with only 1.O USB ports? I have the 1Gh emac which does not have the one 2.0 port and the "mac friendly" image webcam I have requires 2.0. I have seen on other discussions that it is not possible to upgrade this machine with a pci card. What is my solution to this. Are there other cameras that work on 1.0 with macs?

    OSX does not support much other webcam's then the iSight.
    Use this Application:
    http://webcam-osx.sourceforge.net/
    Now you can connect all these webcam's (and many other's):
    http://webcam-osx.sourceforge.net/cameras/index.php
    This is the best and only solution!
    Hopefully this is helpfull or solved your problem. Consider rewarding some points!
    Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?

  • Not able to use Apple Gift card for buying ipad apps

    Hello all.
    I recently bought online a 200$ Apple Gift Card for buying apps for the iPAD.
    I can't seem to be able to do that. My gift card has a number and a pin. Does this mean I can only use it phisically to buy in the store?
    I just want to buy apps.
    Thanks!
    Federico

    Ufirus wrote:
    Hello all.
    My gift card has a number and a pin. Does this mean I can only use it phisically to buy in the store?
    I just want to buy apps.
    You do need an iTunes-Gift Card instead - Your card can be used for shopping at the Apple Online Store.

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

Maybe you are looking for