Not able to use RUN_PRODUCT in Oracle Apps11.0.3
I am getting FRM-40733 error when trying to call a report from forms. I have registered the form and when calling the report Iam getting the FRM-40733 error.
Please let me know what can be done .
Thanks,
Previn
In forms 4.5 you use run_product, so using it is OK.
I don't know if you can test your form and report stand alone (outside Oracle Apps). Does that work? If so, it is likely an Oracle Apps problem.
Also, check if your Forms Developer version and Oracle Apps Forms runtime version are the same.
There is a special forum for Oracle Apps. You can try there.
If it doesn't work stand alone either it is a problem in your form. Post your code here.
Similar Messages
-
Not able to use SRW.USER_EXIT in oracle forms.
Hi,
Below is my requirement in oracle forms:
I have a query form, which has Inventory Category Set field and Category 'From' and 'To' fields. Based on the values selected by the user for Category Set, possible combinations for Categories should be displayed in Cateogory 'From' and 'To' fields. Upon clicking the 'Find' button, only the items which belong to this category set and the range of Cateogies selected should be displayed.
Note that 'Item Categories' Key flex field should be used here. Number of Segments for each Category set will differ. To acheive this, I have attached the Key flex field to the Cateogory 'From' and 'To' fields.
In the PRE-QUERY trigger of the datablock, I have to use where condition to filter the items based on the category sets and categories. This where condition should be generated dynamically based on the search criteria.
In oracle report, we have provision to use the below USER_EXIT to get the where condition to append to my PRE-QUERY statement.
SRW.USER_EXIT('FND FLEXSQL CODE = "MCAT"
OUTPUT = ":P_WHERE_CAT"
APPL_SHORT_NAME= "INV"
MODE = "WHERE"
DISPLAY = "ALL"
NUM = ":P_STRUCT_NUM"
TABLEALIAS = "MCA"
OPERATOR = "BETWEEN"
OPERAND1 = ":P_CATEGORY_FROM"
OPERAND2 = ":P_CATEGORY_TO"');
But in forms, I am not able to use this USER_EXIT. Please let me know the alternate ways to get the where condition dynamically in forms.
Thank you in advance.
Regards,
KalyanRAISE APPLICATION_ERROR built-in is raised in a DB procedure/function or trigger.
You can write an ON-error trigger that will trap any DB error messages
or
You can use Dbms_Error_Code & Dbms_Error_Text for trapping the Error. -
I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.at various times it asks different passwords.
Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.
-
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?
Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.
-
TS1398 After upgrade to iOS 6 i am not able to use wifi.
Connected, but no wifi traffic (at home).
After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
Can not connect at all (at work).
Thank you for helpfull advice.
Vladimir
Please do not give me advice like:
switch proxy to auto
turn the flight mode on and off
turn the iphone on and off
release the ip
recovery the network settings
recovery firmware
I have tried all these, but did not work.
PS to apple:
I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!This helped me solve the problem:
I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
Targat -
My mac's launchpad is working but i am not able to use the apps that are provided in the launchpad
my mac's launchpad is working but i am not able to use the apps that are provided in the launchpad
Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/ -
Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.
FaceTime for Mac: Troubleshooting FaceTime
-
I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help
The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock -
Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.
Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy -
In iTunes I have an account balance that I am not able to use. I tried to buy different items and it wont allow it, but I can buy "FREE" ones. Is there a min amount that I am requaired to have in my account? OR is there some other reason why I am not able to spend out of my account. I used a 50 gift card and spent all but 6 bucks. Now its requiering a credit card or gift card code. But I still have a balance.
I tried to buy different items and it wont allow it
Are you attempting to purchase items from teh iTunes Apps store?
If you ar ein Canada, you cannot use gift card balance to purchase apps.
You can only purchase songs, videos or movies with a gift card.
You need a CC to purchase apps in Canada. -
Not able to use facebook on my blackberry 8520.
Still no revert received regarding my earlier post. Not able to use facebook on my blackberry 8520.
If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.
-
Not able to use new attribute in set defination
Experts,
I have created one custom variable employeestatus. Did the binding with 'user' object and also added in MPR 'Synchronization: Synchronization account controls users it synchronizes'..
However I am still not able to use the new attribute in Set definition.
Error says access denied.
Please suggest.
Thanks,
MannHi,
You need to add it to one of FilterPermission objects (depending on what you need either Administrator Filter Permission or Non-Administrator Filter Permission).
Go to All Resources, locate Filter Permission, open one of them and add your attribute to the Allowed
Attributes under Permitted Filter Attributes tab.
Regards, P -
storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?
Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device. -
Dynadock U3.0 - Not able to use Ethernet port after Win 8.1 update
Hi everybody,
i am using a Dynadock u3.0 dock with my Vaio SCP 13.
Since I updated my device to Windows 8.1 Update 1 I am not able to use the Ethernet port of the Dynadock.
Before that everything worked fine.
I am not able to reinstall the drivers correctly (tried 7.6m0, 7.5m2). While the driver insaller tries to start i am getting an error message, that the installer is not able to set a bunch of registry Keys (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) (till 0). (Image 1)
If i ignore those messages and do install the driver, the Ethernet port will remain uninstalled in the device manager. (Image 2)
If I try to install the driver manually (DisplayLink Network Adapter NCM), Ill get an error message that a driver was found but that the access was denied. (Image 3)
I started the safe mode and could install the driver. But if I reboot to normal mode, the device could not be started.
I also tried to disable UAC and I am logged in as the "real" administrator.
Please find the error messaged attached (in German):
[image 1]: http://picload.org/image/lcalwop/toshiba.png
[image 2]: http://picload.org/image/lcalwoc/toshiba2.png
[image 3]: http://picload.org/image/lcalwlg/toshiba3.png
BTW: If I unzip the installer (7.6m0) and install the *inf for the right ven&dev (4503) it still does not work...
I dont know what to do anymore...Hi
After Windows 8.1 upgrade, you should also update the Display Link driver/software
This is very important!
The latest driver can be downloaded here:
http://www.displaylink.com/support/downloads.php
Note: the old version should be removed!
Maybe you are looking for
-
How do I send from different email address
I would like to use a clients email address when I send out thier survey form. It is more recognizable and less likely to get caught is spam filter compared to using my email address.
-
Photoshop CS6 iPhone video editing
Photoshop CS6 has video editing but can not render any video from iPhone 5
-
HT5569 How can I print wireless from my iPad 4
Hi everyone!... How can I print wireless from my iPad 4? Your answer will be most appreciated. Thank u s. M.
-
hello! i just purchased a macbook from a friend and she has forgotten the admin account password. so i cannot update any software or work out how to wipe it. does someone know how i would do this, not knowing this info, or having the original install
-
Hi Gurus, In DB02 / Diagnostics displays that following tables are missing: - ORA_COCKPIT_HELPER - SFHOT - T77TNM_IFPROPS - YINFTOOL I found some sap notes how to solve the issue, but was not able to. 1. What are these tables. 2. Do I need them, if N