Not able to use the scroll in screen.
Hi all,
I am stuck up in a problem with the scroll function.
I am trying to convert the PO to SO automatically. For this via i am directed to VA01 automatically. Here all the required fields are comming automatically. But the problem is that when i try to put in the header condition 'ZFAH' it automatically places the cursor at the first column first row, as this field is already having value in display mode, i am getting an error as 'This is not an Input Type Field'. I have to scroll this to the last to that i can get the empty field for KOMV-KOSCHL to place my field. when i manually scroll, it is taking. But when i go for use BDC processing, its not taking.
Pls help, it is urgent.
nc
Hello NC
You don't write anything about what version of R/3 you use, so I just checked the version I have fastest access to (4.0b).
In this version there is a push button on the screen to insert new lines (OK-code KOAN).
When this button is pressed the table is scrolled making the last already used line turn to line one. After this line 2 is always ready for input so you enter your ZFAH condition in line 2.
There must me similar function in your version.
Best regards
Thomas Madsen Nielsen
Similar Messages
-
Dear Staff
I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
Highly respected
Sarawut
My email: ********
<Personal Information Edited By Host>It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service. -
i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help
You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
The User Guide would be good for you to read:
http://support.apple.com/manuals/#ipad -
Iphone 4 screen not responding. not able to use the slider to unlock the phone
Hi,
I have a iphone 4 which was purchased in the UK 2 yrs back. I use this phone in india. Since today morning the screen has become unresponsive and i am not able to use the slider to unlock the screen to be able to make or recieve calls or perform any other fuction on my phone. I spoke to apple customer care in india about this problem and they suggested to try restoring the phone which didnt work out. Now they say that I will have to get this repaired in the UK since apple doesnt have apple stores and service centers in India. I think it is some hardware issue. I am not in a position to send it back to UK since i dont have any friends or relatives there in the UK nor i am traveling to the UK at this point in time. Pls help me out and suggest how can i get my phone replaced in India.
Regards,
RajatThen go to Settings/General/Accessibility and turn Zoom to OFF.
-
When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????
Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference -
My mac's launchpad is working but i am not able to use the apps that are provided in the launchpad
my mac's launchpad is working but i am not able to use the apps that are provided in the launchpad
Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
iTunes Support -
http://www.apple.com/support/itunes/ -
Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.
Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy -
storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity. Device will not allow extra downloads..?
Welcome to the Apple Community.
Purchasing additional iCloud storage will not give you additional storage on your device. -
I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?
Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
why am i not able to use the $12.58 in my itunes acct to purchase items - I am using a new computer and it requests the code on the back of the itunes gift card which I no longer have available but Itunes is telling me I still have that amount in my acct.
You don't have a copy of it on your backup of your downloads and you've checked your computer's hard drive for it ? What you can re-download will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If other films show there but not that one and it's still in your country's iTunes store then check to see if it's hidden : http://support.apple.com/kb/HT4919
If it's not hidden and it's still in your country's store then you can try contacting iTunes Support and see if they wil grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I am not able to use the personal hot spot in the ipad 3 the new one .
It should be in Settings > General > Network > Personal Hotspot - if it's not there then have you checked with your carrier to see if they support it on the iPad (and even if they support it on the iPhone they don't necessarily also support it on the iPad) ? It may also be an extra fee/subscription from them, and you could check if there is a carrier update.
-
I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
MichaelThat situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.
-
Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older wireless keyboard, and the same thing happened. It must not be the keyboard if it happened to two different keyboards. I have a habit of restarting my computer, when things don't work, I find it helps, and sure enough, everything works. Today, it happened again. Does anyone know what is causing this to happen?
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try reinstalling Yosemite with out losing stuff. See:
OS X Yosemite: Reinstall OS X -
I set up a new folder for an email sender and now my emails are not able to use the rules that I set up. What can I do to enable them again.
I don't seem to be able to copy a rule, but, this is how one rulel displays.
Name of Rule is Richard Cryar.
If any of the following conditions are met:
From contains rcryar@auduboncapital
Move message to Richard Cryar mailbox
Not only does this rule not work, but all emails are going into the new box I created and not to the inbox. -
Not able to use the deleted Del. document serial nos
Dear All,
I am not able to reuse the reverse PGI document serial nos.
Proess is like that I have done PGI with serial no. and due to some reason i have to reverse the PGI and further i deleted the existing del. doc no. . Now when i am going to reuse the serial no. for new del. no. it is showing error that the serial no. has
customer status.
Kindly suggest me the config for the same.
Thanks in advance.
Dear Experts please advise on the same.
Regards
AJIT K SINGHHi Ajit,
It simple to correct it.
Problem is when you reverse the delivery and Delete the status has not been changes.
For resolving this issue, you should have the access of T-code IQ02 --> enter your material number and serial number --> Enter --> Click at "Edit" (Menu) --> Special Serial number function --> Manual Transaction --> Select "To stock" --> Status become ESTO --> then you can use it for other order or delivery.
Hope it helps,
Regards,
MT
Maybe you are looking for
-
Photoshop CC 2014 Crashing on Launch
Windows 8 GEFORCE GT 635M Seems to be the same issue as other, but haven't seen a fix yet. Re-installed once Updated windows Need Help TY
-
Has anyone used the IC Interactive scripting editor for the Webclient ?
We originally received the 'Loading %0' message when loading the editor via the IC_MANAGER business role. This was overcome by updating Java (See note 717921). However, the editor now seesm to working, I can see two examples as standard, but when I c
-
Suppose my Composite opertaion request schema is as below: <?xml version="1.0" encoding="utf-8" ?> <Request xmlns="http://[PROJECT_NAME].[COMPOSITE_SCHEMA_NAME]"> <Insert xmlns="http://schemas.microsoft.com/Sql/2008/05/TableOp/[SCHEMA]/[TABLE_NAME]
-
JSlider in JMenu problem.
I have recently switched to using jdk1.5.0_04 and have some problem. I have a JSlider contained in a JMenu. But I cannot drag the slider anymore, this worked in java 1.4. I can only click on a tick on the slider and the sldier will move to the locati
-
ACE DSR (Direct Server Return) Questions.
I currently have an ACE 4710 configured for DSR. However, I am at a loss as to how I should configure the loopback (or virtual interface) for the servers. Easy to do in Linux, but not so much on a Windows Server 2000 box. Any ideas or guides would be