Not able to used internet via intravlan

I HAVE ONE LAYER-3 SWITCH.(SGE2000-CISCO SMALL BUSINESS).
I HAVE THREE WEB MANAGED SWITCH.(SRRW224G4-CISCO SMALL BUSINESS)
NOW, ALL WEB MANAGED SWITCHES ARE FIXED IN THREE DIFFERENT DEPARTMENT. & LAYER-3 SWITCH IS FIXED IN CENTRAL SERVER LOCATION.
IN L-3 SWITCH, I HAVE CREATED THREE DIFFERENT VLANS & GIVEN DIFFERENT SUBNET TO EACH VLAN.
NAMELY,
(DEFAULT VALAN ID -100 & SUBNET IP:192.168.100.1/24)
(FIRST VALAN ID -10 & SUBNET IP:192.168.10.1/24)
(SECOND VALAN ID -20 & SUBNET IP:192.168.20.1/24)
(THIRD VALAN ID -30 & SUBNET IP:192.168.30.1/24)
NOW,
EACH DEPARTMENT SWITCH ARE ATTACHED TO L-3 AS PER THE PARTICULAR VLAN SEGMENT.
ON L-3 SWITCH,
TWO SERVERS ARE ATTACHED ON DEFAULT VALAN WITH THE SAME CLASS IP & GATEWAY OF DEFAULT VLAN IP(i.e. 192.168.100.1)
IN THIS CASE ALL THE PC FROM DIFFERENT VLANS ARE ABLE TO PING THE SERVER DUE TO INTRAVLAN COMMUNICATION.
PROBLEM:
I HAVE ALSO ATTACHE ONE LINKSYS BROAD BAND ROUTER(WRT54GL) IN DEFAULT VLAN OF THE L-3 SWITCH, WITH THE IP ADDRESS OF 192.168.100.20/24.
I AM NOT ABLE TO GIVE THE GATEWAY ADDRESS ON THE LAN SEGMENT OF THE ROUTER & HENCE INTRA-VLAN PCS ARE NOT ABLE TO PING THEM & NOT ABLE TO USE THE INTERNET.
********* HOW INTRA-VLAN PCS ARE ABLE TO USE INTERNET?***********

There are plenty of packet data services that your phone can use & some provider does not offer or configured automatically in your phone. When you browse the internet without using the modem, you might be connected by WCDMA (packet data) & when you use the modem, it's using another services such as GPRS in which your phone is not configured or your service provider not activated. Go to connection & check all access point if all are in order.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Similar Messages

  • Not able to use GoogleTalk via WiFi

    I am using BB-9320 since last 2 weeks.
    But I am not able to use GoogleTalk via WiFi.
    Since I don't want to connect my phone via service provider, so I have keep "data services" option off.
    I am able to use internet and all other apps via WiFi, but just 1 app that is not running is "GoogleTalk"!!
    I am not able to log in on GoogleTalk. It displays error that, "Data Service Unavailable".
    What should I do?
    Is there any other way to use GoogleTalk??
    Thank you..In Advance

    Hello bhumil1991, 
    Welcome to the forums. 
    In order to use Google Talk you require a data plan through your wireless service provider. You can see the system requirements for Google Talk at the below link. 
    Google Talk - System Requirements 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Not able to use internet sharing on my iMac 8.1 using Mac OS X 10.6.8

    Im not able to use internet sharing on my iMac 8.1 using Mac OS X 10.6.8, I tried internet sharing with OS Lion and it works fine. Has anybody else experience this problem and  what was the solutions.

    If your OS is OS X 10.4.11 then you should be able to install iTunes 8.1 which according to the iTunes page requires 10.4.10 or later (which is a lower version than yours). It also requires QuickTime 7.5.5 so check your version of QuickTime. Version 10.4 is Tiger by the way. Leopard is 10.5 and Panther was 10.3.
    Make sure that your OS is at the version you think it is. Connect your MacBook to the internet and from your desktop go to the Apple symbol on the Finder bar at the top of your screen. Choose "About This Mac" and check your OS version. Also from the same menu choose Software Update and see if you are offered any updates for your computer. If it does offer an OS X update, install it and anything else in the list then run software update again to see if any more components are offered for the new version.

  • I received a massage to upgrade carrier, after upgradtion I am not able to view the APN setting which earlier was showing. Please advice how to resolve the problem as I am not able to use internet on my mobile with my data sim.

    Hi,
    I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
    Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
    Please help me out as I am not able to access internet.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Not able to use Internet from Any App Except Chrome

    I updated to Yosemite from AppStore recently. After the installation, I can open all websites from Google Chrome. However, none of my other Apps can connect to the Internet. For instance, Dropbox, Box, App Store and Safari Itself cannot connect to internet. Only Google Chrome works fine (from which I am posting this). Any help is really appreciated

    This was fixed through the following suggestion
    witchmdOct 17, 2014 1:47 PM Re: No internet connection after installing yosemite
    Re: No internet connection after installing yosemitein response to sodquinn
    I now have internet connection back.  I typed the following in terminal:
    sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist

  • I am not able to use internet in i-phone 4s turbo after updating it ios6 to ios8 n some option is also missing from my phone like enable 3g and APN

    plz help me out of it am very much frustated of it

    You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?

  • I am connecting to my wireless network but not able to use internet.  Used to work fine on this computer.  Still works fine with iPhone and older iMac.

    When I connect (I have it set for Auto DHCP) the IP address that I get is a "bad" address - first 3 digits are 169.  There is no router IP address on summary page.  Any ideas?

    169.***.***.** is a self-assigned IP address. The system does this when it cannot obtain a functioning IP address from the DHCP server. There can be myriad reasons, but the following Apple help page shows the way out.
    http://support.apple.com/kb/TS1920
    Good luck
    Max

  • Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser

    Hello,
               Not Able to Use Gtalk in Curve 9320 Via my Sim data but internet is working as i checked via browser & i also use youtube but not able to login any messaging option & not able to creat Email account Please Help!
    Thanku
    Shivam

    Hey shivamr25,
    Thanks for the reply.
    After checking your PIN number, it shows you do not have a BlackBerry® data plan with your network service provider.  This is required to use Google® Talk.  Contact your network service provider to add a plan.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • HT1338 I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51). Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0. Than

    I wonder if somebody can help me. I am not able to use my internet bank anymore, since Java launched their latest update (7.51) a few days ago. Appearently this one is not compatible with my hardware. I am using Mac OSX version 10.6.8, and Java version 17.0, which seems to be the newest one for my op sys. Anybody know how I can solve this? In advance thank you!

    Apple support article to enable Java 6.
    Java 6 Enable

  • I have an iMac 20 inch early 2009 software osx 10.8.1(12b19)...i am not able to use my internet, outlook, or any messenger. tried troubleshooting, reseting safari, disabling firewall, deleted intego...still no internet

    I have an iMac 20 inch early 2009 software osx 10.8.1(12b19)...i am not able to use my internet, outlook, or any messenger. tried troubleshooting, reseting safari, disabling norton firewall, deleted intego...still no internet. i did delete intego without uninstalling so im wondering if that caused the problem. everytime i try to open safari it displays this: Safari can't open the page: "http://www.yahoo.com/". the error is: "the operation couldn't be completed. Operation not permitted" (NSPOSIXErrorDomain:1)

    Like nearly all antivirus utilities for OS X, Norton a/k/a Symantec and Intego are worthless junk that will cripple your Mac. Remants of one or both are most likely preventing Safari from communicating.
    Search the forums for techniques to eradicate them - simply disabling them or dragging their apps to the Trash is not likely to be sufficient. Start by reading this procedure from Symantec:
    http://www.symantec.com/business/support/index?page=content&id=TECH103489
    For Intego: http://support2.intego.com/kb/index.php?x=&mod_id=2&id=214
    ... i did delete intego without uninstalling so im wondering if that caused the problem.
    I believe you are correct. Download and run its uninstaller.

  • TS1702 I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3. However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via e

    I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
    However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
    Installation was rejected because I need the iOS.4.3
    Thanks for your help
    Michael

    That situation went from inconvenient to complicated quickly.  Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled.  I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned.  Sorry this happened the way it did.  Definitely not efficient.

  • FireFox says it can not establish conncetion, I have done everything on your site I have even uninstalled it. I am able to use internet explorer. There is nothing wrong with my network

    For the past few days I have tried to get onto mozilla and I can't. It says to check network, nothing is wrong with my network. I am able to use internet explorer. I have tried uninstalling it adn i have tried everything on your website. I dont' think mozilla is too busy and I keep checking the firewall

    See Firewalls - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Firewalls
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

    I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
    Thank you in advance
    arl

    Hi Keith, sorry for my late reply.
    Surely I am able to connect to the help function when Icontact the website
    of AdobeLR5.The problem is as follows,
    When I open LR5 on my computer and work with it and try to open the help
    function in the software, I don't get it.
    When I bought the CD I was naiv enough to believe that I get an independent
    working software. I learned in the meantime, that the seller does not allow
    to work with, without being connected to them.
    I don't believe that I am paranoid, but I like to buy something and use it
    without to inform the supplier that I do it. Otherwise I could have bought
    the license fpr LR5 via internet.
    Best regards
    Karl
    2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
        I bought a cd with Lightroom 5. After installation and registration I
    am not able to use 'help' function and I cannot update the software. I
    anyone able to give me a hint how to handle it? Thank you ind advance Karl
    kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
    marked Keith_Reeder
    <https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
    reply on I bought a cd with Lightroom 5. After installation and
    registration I am not able to use 'help' function and I cannot update the
    software. I anyone able to give me a hint how to handle it? Thank you ind
    advance Karl
    <https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

  • Macbook Pro suddenly will not connect to the internet via ethernet cable.

    I know this is a long shot... but I figured I would give it a try.
    My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
    I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
    I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
    When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
    I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue.  Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
    I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Sender File Adapter  not able to get file via FTP from an external system

    Hi,
    I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml".  The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
    The connect mode is Permanently and the transfer mode is Binary.
    Can you help me?
    Thanks.
    T.

    Hi Teresa,
    does this case appears with a file size higher the others?
    Personally, I do not recommend to have a polling under 1min.
    10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
    If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
    regards.
    mickael

Maybe you are looking for

  • Unequal size of X, Y, Z axis for 3D graph

    Hi, I have different size of array in X, Y and Z axis. What graph should I use best? I tried using 3D surface graph but it consume all my memory. My data is X = 1 X 41 array Y = 1 X 32768 array Z = 41 X 32768 array/matrix Thanks a lot...

  • Change Extract structure -- Access key required ?

    Hi guys, I wanted to change the extract structure for one LO extractor. Just add one field from the available pool of fields. Is access key required for this ? Thanks, BWer

  • Which jinitiator for w98 and win xp ?

    hi all , i am deplying my forms6i on the web using oracle9ias . the application works fine with w98 client where in it does not seem to be working with winxp client. i think there is problem with jinitiator. can somebody tell me which version of orac

  • Move catalog and pictures?

    How do I move my catalog and original images to an external hard drive?  I have it all on my iMac now and would like to move both the catalog and images to an external drive.  And keep the program itself on the iMac. Thanks!

  • Partial Phonebook Download Issues with Jeep 8.4AN Uconnect Software

    Is anyone having a similar issue with an iphone 5 os 6.1.4? I just bought a new Jeep GC which comes with 8.4AN Uconnect Software. My phone connects via bluetooth fine but in my phonebook only my A-M contacts are shown. Can anyone help?? Thanks