Not able to view Characteristic Hierarchy using Tcode KES3

Hi everyone,
I need to view the Characteristic Hierarchy using T-code KES3 in CO-PA. Ideally, once we are into KES3 screen, we need to select the characteristic and variant to display the hierarchy. But, when I select the characteristic and variant, it says that "Hierarchy doesn't exist".
However, when I create a report for that particular characteristic using T-code KE31, I am able to view the hierarchy for that characteristic there.
Can anyone please help me in this regard that why the characteristic hierarchy is not available in KES3, while it's picking up the hierarchy at the time of report creation.
Thanks.
Regards,
Gaurav Tibrewal

Hi Nikolas,
I want to see the hierarchy of "Business Unit" characteristic. This characteristic is being maintained under "Referenced Characteristic" in T-code KE31. This characteristics is being maintained in Profitability Analysis (T-code KEA5).
Also, I am not able to derive the source where the hierarchy is being maintained for that characteristic. Because, if hierarchy is coming while creating CO-PA reports. they must be maintained somewhere.
Please let me know if you need any further input.
Regards,
Gaurav

Similar Messages

  • I received a massage to upgrade carrier, after upgradtion I am not able to view the APN setting which earlier was showing. Please advice how to resolve the problem as I am not able to use internet on my mobile with my data sim.

    Hi,
    I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
    Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
    Please help me out as I am not able to access internet.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Not able to view CrystalReportViewer in Azure Application.

    Hi All,
    We have an application which was developed in VS 2005 with .Net framework 2.0 and crystal report version 10.
    We have migrated this application to azure using VS 2013 with .Net framework 4.5 and crystal report version 13.2.
    We have included the Crystal report msi in the package for deploying it on azure.
    We have used the CrystalReportViewer on one of the page in our application to view the reports but we are not able to view it.
    Thanks

    Here is a KBA that discusses Azure and CR:
    1765620 - What version of Crystal Reports supports Windows Azure?
    Note that the simple string "crystal azure" in the search box at the top right corner found the above as the very 1st hit. E.g.; please search 1st...
    The KBA points to the SAP Idea Place where anyone can ask for an enhancement to CR. Note that the Idea has been viewed 264 times and only voted up 4 times (one of those votes is mine). E.g.; it does not appear to be a highly demanded enhancement and I do not believe it will ever see the light of day.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Not able to view mails in inbox

    Hi I use ovi mail and currently i am not able to view mails in any of the folders. I use the same user name as that of my yahoo mail account. Does this has to do anything.

    Have you tried a battery pull yet?
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Not able to view PDF in Safari 6.0.2

    Hi,
    Not able to view pdfs in my Safari 6.0.2. I get a black screen and the following message -The Adobe Acrobat/Reader selected for viewing PDF documents in browsers cannot be found at its installed location; it may have been moved or deleted. Please reinstall or repair the application. (16:9)
    I am able to download and view the pdfs though. Hw do I solve the problem.
    Thanks,

    Reinstall the latest version of Adobe Reader - http://www.adobe.com/products/reader.html - it will install the latest version of the "Adobe Acrobat NPAPI Plug-in, Version 11.0.01" and you'll be able to view any PDF file inline using Safari (Safari does have a 'built-in' PDF renderer that works for some files, but not for any AcroForms, etc.). And Preview is just about the worst PDF reader available - I would make sure that you set Adobe Reader to be your default application for viewing and interacting with PDF files.
    Good luck - be sure and restart Safari after the plugin is intstalled. Call back should you have any problems.
    Clinton

  • Not able to view Folders in Business area.

    Hi,
    User has been given access to XYZ business area from discoverer Admin but not able to view folders in Discoverer Plus (web based) but he can view the folders under same business area (ie XYZ) using Discoverer Desktop Application. Only one user is facing the problem other users with same business area (ie. XYZ) can view all the folders under that business area. User tried on other PC also but result the same.

    I faced same kind of problem some time back & found JInitiator as the cause. Try unintalling older Installation of JInitiator & reinstall it & it should work.

  • Not able to view data and song folders/files in my ipod

    Hi All,
    I have a 30 GB Video iPod which I have been using since the past 6 odd months. Recently, my iPod was infected with a virus. I managed to clean up the virus but since then I am not able to view the data and song files or folders stored in the iPod. I can only view a hidden folder with the name 'astry' and when I double click on it nothing is visible. I tried some freewares available for data recovery but they just scan the iPod and tell that so many number of files are available. But for retrieving them I will have to buy the software.
    Has anyone faced similar project? Does anyone knows any solution to this problem?
    Thanks,
    Sameer

    Hi Aneesh,
    First be more clear about Aria Application. As Aria, is been related to an hrms part of an organization carrying the people infomation and it has some separate features too.
    But in your prespective i couldnt able to understand what do you want to do with that packeged application.
    Since you want to customize the aria application according to your organization needs means, First collect all your necessary organization information that is needed(like tables etc.). Then substitute those (i.e) your organization tables in the appropriate places in the form of query.
    Please dont use the same Aria people table, as the Oracle may framed according to their employee information. Nearly Aria application has 200 supporting objects. If you want to use the same objects means whether u r going to creating nearly 200 supporting objects..It is not worth at all.
    Please be more clear in your requirement that, what you are doing, and then raise the question. Be more prepared with your tables along with datas, and let give your reply once you were been prepared with your organization details table.
    As there are more peoples in the forums to help you other than me.
    Brgds,
    Mini
    Mark Answers Promptly

  • Not able to view text while typing beyond the top edge of the keyboard

    I have an iPad mini with updated iOS 8.1.3 ......
    Honestly I was very happy with iOS 7 it was perfect. The iPad was working fast and effortlessly. Just like how any apple product should be.
    Until iOS 8 spoiled the show. There are many problems I'm facing after the update, but I want a solution for my major problem.
    Problem 1: (Major –Blinded by the Keyboard)
    I'm not able to view the body text beyond the edges of the keyboard while I’m typing; may it be in Notes, Pages, Numbers, Keynotes, calendar or any other app, which requires typing. Earlier I could just swipe it up and so it got scrolled to the end of the document. I extensively use notes, Calendar, pages, numbers, and keynote on iPad but sad that I can't see anything, though it is typing beyond the edge of the new keyboard. It's just stuck. Presently I'm copy-pasting, by typing at the beginning of the document cause after it reaches the edge of the keyboard I'm blind can't see. Please fix it soon before people realise this.
    Problem 2: (updating)
    iOS 8.1.2 is slow for iPad mini 1. When the processor is not able to manage this update then why does Apple give the option of updating. iOS 7 was just perfect. I was forced to update it because my app updates wouldn't update. Soon as I click update it opens the app and there you have it 'nothing'.
    Problem 3: (Siri)
    what is the use of Siri when it is slow to react, (in 3G). It just opens up slow.
    Problem 4: (Photos app)
    Photos app response time is very slow on iPad.
    Problem 5: (assertive touch)
    The assertive touch button on screen just goes dud sometimes on iPad.

    For your keyboard problem:  Hold down the home & sleep/wake buttons simultaneously until the Apple Logo appears then let go & let the iPad boot up normally.
    For your other issues, & if you do not wish to update to iOS 8.2, do a general reset:
    Settings->General->Reset->Reset All Settings.  You won't lose any data but will have to log back into your wifi networks.

  • Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

    I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
    Thanks!

    Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
    iTunes Support -
    http://www.apple.com/support/itunes/

  • I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

    I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

    I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

  • Not able to view exFAT format external hard drive in my macbook pro 10.8.2.

    I have formatted my hard drive in exFAT format from a windows notebook. I am not sure what to do as I am not able to view my hard drive in my macbook.
    Can somebody please help me out in this regard.?

    Try connecting the exFAT drive back to the Windows notebook and use the "Safely Remove Hardware" icon in your Taskbar.
    Run a updated malware scan and/or remove any original data and reformat the drive again.
    Your issue doesn't appear to be widespread, so I'm leaning towards something that got messed up somehow.
    Mac's can read/write MBR/GUID and FAT32/exFAT drives, only can read NTFS, so it shouldn't be having a problem.

  • Finder not able to view folders and files on EHD after updating to OS X 10.9.4

    I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
    Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
    All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
    Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
    I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
    Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
    Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
    iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
    iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
    directory: "/Volumes/HITACHI"
    attributes: avbstclinmedz
    modified: 07/10/2014 23:26:44
    Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

    Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
    It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
    One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

  • Not able to view original PDFdocument through EAI viewer Proj.system

    Hi,
    I'm not able to view the PDF original in project structure. I have attached one PDF file in project structure as an object link. When I'm trying to open the same file from project system, system display the error "cannot create temp File".
    Please suggest to overcome this issue.
    Regards
    Chandru

    hi,
    1. Please tell me which object u used to link PS,
    2. Check defin dat carrier wether u set or not in SPRO. DC20
    3. Check work station application for PDF, and net work should be link server. DC30
    Benakaraj
    ??P

  • PDF Attachment not able to view

    Dear Guys,
    I am not able to view the PDF attachment in SAP Office. I am getting error as 'Database error for <GET DATA FROM KPRO> <>' which is information message. When I click OK it display another error message 'Windows cannot find 'c:\winnt\desktop\<filename>'. I guess the PDF file is uploaded in worng directory. Is it anyway to find out at which directory the attachement of the mail are actualy stored.
    Could anybody help to sort this issue ?
    Regards
    Nilesh Shete

    HI,
    May i know which Function Module you have used and how you have configured?
    Thanks!
    Brunda
    'Reward if useful'.

  • Not able to view the webhelp output in Robohelp 9

    Hello,
    I am in a project where we have to create webhelp output from Robohelp 9. Whenever I generate the webhelp ouput I am not able to view the the contents. Although, the webhelp is opening in a browser window but there are no topics present in the contents. The other ouputs like .chm and .dox are fine, but there is some problem with the webhelp which I am unable to figure out.
    Regards,
    Ruso

    What browser are you using?
    If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for