Not able to view layout in Enhance planning layout UPX_MNTN

I have created a new layout in BPS0 . In the planning level, i have included User exit variable.
I selected the planning area in UPX_MNTN. However in Enhance planning layout, i could not see the layout, i had created in BPS0.
Do i need to do any other settings to view in UPX_MNTN ?

HI Ravindra,
          I was in the same boat. I had assigned an exit variable in one of the  layout. It was not able to execute the layout till runtime, and that is the reason it doesn't come to Planning services.
        In short, planning services will show when all your variable values are getting populated before layput execution.
        I have another issue, where I want to populate brand based on selected products from CRM. I am unable to accomplish this. Please let me know, if you get any response.
Thanks and Regards,
Harpal

Similar Messages

  • Not able to view the fields ....made through enhancement 0002--

    Dear Freinds,
                I have made enhancment for infotype's 0002 and  0023 . However when i am looking through PA30 for a personnel number iam not able to view the fields created in 0002 infotype , however iam able to view the fields created in infotype 0023 . Is there is a any setting's i have to make so that i can view these fields created in infotype 0002 also ??
    please let me know .
    regards
    vamsi.

    Dear Deepak
                yes this is enhancement to 0002 and 0023 ... i have to add one field for the
    0002 ..........as ihave to add chinese name for my requirement ..................
    and i have done some new fields for 0023. if can give me your personnel id i can
    send the screen shots ........
    i want to tell one thing.........   i have created for 0002 by adding new  the new field (chinese name) .. it created a z program.ZP000200(Module pool)  with the below
    includes
    INCLUDE ZP000210.
    INCLUDE MPPDAT00.
    INCLUDE FP50PPSB.
    INCLUDE MPPERS00.
    INCLUDE ZP000220.
    INCLUDE ZP000230.
    INCLUDE ZP000240.
    and when i went to the screen  0200 i have found the field which i have added
    P0002-ZZCHNAM  type char 20 . and i executed from here itself (by clicking F8).
    and iam able to see the field which i have added
    under additional fields...........but the same if i go in PA30 and create .........for an employee (molga = 27)... i dont find the field which i created...... i have done this
    change for the country 27 only.
    regards
    vamsi
    regards

  • Not able to view CrystalReportViewer in Azure Application.

    Hi All,
    We have an application which was developed in VS 2005 with .Net framework 2.0 and crystal report version 10.
    We have migrated this application to azure using VS 2013 with .Net framework 4.5 and crystal report version 13.2.
    We have included the Crystal report msi in the package for deploying it on azure.
    We have used the CrystalReportViewer on one of the page in our application to view the reports but we are not able to view it.
    Thanks

    Here is a KBA that discusses Azure and CR:
    1765620 - What version of Crystal Reports supports Windows Azure?
    Note that the simple string "crystal azure" in the search box at the top right corner found the above as the very 1st hit. E.g.; please search 1st...
    The KBA points to the SAP Idea Place where anyone can ask for an enhancement to CR. Note that the Idea has been viewed 264 times and only voted up 4 times (one of those votes is mine). E.g.; it does not appear to be a highly demanded enhancement and I do not believe it will ever see the light of day.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Not able to view any report in BI Publisher 11g

    Hello All
    I have installed BI Publisher 11g in Intel Solaris 10. I started of from the scratch, created a Data Model, then created a Report. but now I am not able to view the report. Upon clicking the report name or Open it logs me out.
    I am logged in as user, weblogic the default user created while installation.
    Please help
    Ash

    Hi Rony,
    You may have created the report initially with Web Layout only - therefore there will no paper layout.
    To 'get' the paper layout back, select your Report module name from the Builder and then select Tools-->Report Wizard. Select 'Create both web and Paper Layout' and then go through the various wizard steps.
    Best of Luck.
    Regards,
    John

  • Not able to view the User Decisions Buttons in UWL

    Hi Experts,
    We have configured the UWL for the WI execution. Now the Problem is I am not able to view the User Decisions Step buttons in UWL instead when I select the User Decision Step it is opening in SAP GUI there I am able to view the SBWP WI decisions screen.
    But I need those buttons in UWL instead logging in SAP. CurrentlyI am able to see "Open Task", "Resubmit", "Forward" & "Assign to Me" buttons but similarly I want to display the User Decisions Buttons as well. Please let me know o how to achieve this requirement.
    Thanks in advance.
    Regards,
    Srinivas

    Hi Viji,
    I am sorry if it got confused I have copied the standard BO and done the enhancement to the DECISION method as per my requirement and now when I give this task in UWL it does not show up the buttons in Portal instead upon opening the work item it will open a SAP GUI and there it will show up the USER decision details similar to the things in the SBWP transaction. Instead I have seen some cases where it had shown the User Decision buttons in the Portal itself.
    Let me know if you have any idea on this.
    Regards,
    SRinivas

  • Not able to view catalogs in CCM after clicking on "edit catalog"

    Hi all,
    I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog.
    After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog"
    Could anybody tell me, what would be the problem ??
    Thanks in advance.
    Regards,
    Vivek !!
    Edited by: vivek kulkarni on May 26, 2009 12:18 PM

    Hi Jason,
    Thanks for reply and solution.....
    but this problem is only for my user ID and not for all other user ID.
    when we tried with other user IDs, all the catalogs are in green state and working fine. For my ID I am not able to view any catalog into edit catalog screen. When I am trying to search any catalog it is giving me warning message "Error in master catalog". When checked in SLG1 I got error as "catalog (catalog name) not found".
    Is it related to any user setting or like that... as this is the issue with my individual ID.
    Please suggest.
    Thanks !
    Vivek

  • Not able to view mails in inbox

    Hi I use ovi mail and currently i am not able to view mails in any of the folders. I use the same user name as that of my yahoo mail account. Does this has to do anything.

    Have you tried a battery pull yet?
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Not able to view PDF in Safari 6.0.2

    Hi,
    Not able to view pdfs in my Safari 6.0.2. I get a black screen and the following message -The Adobe Acrobat/Reader selected for viewing PDF documents in browsers cannot be found at its installed location; it may have been moved or deleted. Please reinstall or repair the application. (16:9)
    I am able to download and view the pdfs though. Hw do I solve the problem.
    Thanks,

    Reinstall the latest version of Adobe Reader - http://www.adobe.com/products/reader.html - it will install the latest version of the "Adobe Acrobat NPAPI Plug-in, Version 11.0.01" and you'll be able to view any PDF file inline using Safari (Safari does have a 'built-in' PDF renderer that works for some files, but not for any AcroForms, etc.). And Preview is just about the worst PDF reader available - I would make sure that you set Adobe Reader to be your default application for viewing and interacting with PDF files.
    Good luck - be sure and restart Safari after the plugin is intstalled. Call back should you have any problems.
    Clinton

  • Not able to view Folders in Business area.

    Hi,
    User has been given access to XYZ business area from discoverer Admin but not able to view folders in Discoverer Plus (web based) but he can view the folders under same business area (ie XYZ) using Discoverer Desktop Application. Only one user is facing the problem other users with same business area (ie. XYZ) can view all the folders under that business area. User tried on other PC also but result the same.

    I faced same kind of problem some time back & found JInitiator as the cause. Try unintalling older Installation of JInitiator & reinstall it & it should work.

  • Not able to view data and song folders/files in my ipod

    Hi All,
    I have a 30 GB Video iPod which I have been using since the past 6 odd months. Recently, my iPod was infected with a virus. I managed to clean up the virus but since then I am not able to view the data and song files or folders stored in the iPod. I can only view a hidden folder with the name 'astry' and when I double click on it nothing is visible. I tried some freewares available for data recovery but they just scan the iPod and tell that so many number of files are available. But for retrieving them I will have to buy the software.
    Has anyone faced similar project? Does anyone knows any solution to this problem?
    Thanks,
    Sameer

    Hi Aneesh,
    First be more clear about Aria Application. As Aria, is been related to an hrms part of an organization carrying the people infomation and it has some separate features too.
    But in your prespective i couldnt able to understand what do you want to do with that packeged application.
    Since you want to customize the aria application according to your organization needs means, First collect all your necessary organization information that is needed(like tables etc.). Then substitute those (i.e) your organization tables in the appropriate places in the form of query.
    Please dont use the same Aria people table, as the Oracle may framed according to their employee information. Nearly Aria application has 200 supporting objects. If you want to use the same objects means whether u r going to creating nearly 200 supporting objects..It is not worth at all.
    Please be more clear in your requirement that, what you are doing, and then raise the question. Be more prepared with your tables along with datas, and let give your reply once you were been prepared with your organization details table.
    As there are more peoples in the forums to help you other than me.
    Brgds,
    Mini
    Mark Answers Promptly

  • Not able to view the content in Microsoft help viewer (MS VS 2012)

    Hello Team,
    I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
    We tried many settings in IE but still not able to resolved. So i need more expert help. 
    My customer having one issue- 
    # User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
    So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
    I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
    Thanks,
    Rahul B. Patil.
    +919972004298.

    Hi Sri,
    it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
    Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
    If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
    Best regards
    Xu

  • Not able to view text while typing beyond the top edge of the keyboard

    I have an iPad mini with updated iOS 8.1.3 ......
    Honestly I was very happy with iOS 7 it was perfect. The iPad was working fast and effortlessly. Just like how any apple product should be.
    Until iOS 8 spoiled the show. There are many problems I'm facing after the update, but I want a solution for my major problem.
    Problem 1: (Major –Blinded by the Keyboard)
    I'm not able to view the body text beyond the edges of the keyboard while I’m typing; may it be in Notes, Pages, Numbers, Keynotes, calendar or any other app, which requires typing. Earlier I could just swipe it up and so it got scrolled to the end of the document. I extensively use notes, Calendar, pages, numbers, and keynote on iPad but sad that I can't see anything, though it is typing beyond the edge of the new keyboard. It's just stuck. Presently I'm copy-pasting, by typing at the beginning of the document cause after it reaches the edge of the keyboard I'm blind can't see. Please fix it soon before people realise this.
    Problem 2: (updating)
    iOS 8.1.2 is slow for iPad mini 1. When the processor is not able to manage this update then why does Apple give the option of updating. iOS 7 was just perfect. I was forced to update it because my app updates wouldn't update. Soon as I click update it opens the app and there you have it 'nothing'.
    Problem 3: (Siri)
    what is the use of Siri when it is slow to react, (in 3G). It just opens up slow.
    Problem 4: (Photos app)
    Photos app response time is very slow on iPad.
    Problem 5: (assertive touch)
    The assertive touch button on screen just goes dud sometimes on iPad.

    For your keyboard problem:  Hold down the home & sleep/wake buttons simultaneously until the Apple Logo appears then let go & let the iPad boot up normally.
    For your other issues, & if you do not wish to update to iOS 8.2, do a general reset:
    Settings->General->Reset->Reset All Settings.  You won't lose any data but will have to log back into your wifi networks.

  • Need help with imovie photos extension. I am not able to view the editing tools no matter what I do!!!! Help please ASAP

    I Have read a lot of tutorials or whatever but Im not able to view the editing tools from imovie in the photos app. I have tried the trimmer thing and the yellow outline does appear but the only options available are "play, trim or cancel". I really really want to use the filters and stuff so please help me if you can!
    Thanks!

    Well, everything that you have bought with her Apple ID prior to getting your own Apple ID is forever hers. Apple will not transfer content from one ID to another. But in the case of the Mac, contact iTunes Customer Service and request that they send your issue to the Account Security Team and ask that the Mac be released form your mother's account so you may register it with your account. Then you can accept the iLife apps into your account for any future updates.
    iTunes Support -
    http://www.apple.com/support/itunes/

  • I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

    I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

    Have you rebooted your home router?

  • I just bought a new printer for my iMac version 10.7 but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!!

    I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!

    I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!

Maybe you are looking for