Not access fb when using Muontain Lion? how to fix?

Hello ,
I have update from Lion to Mountain Lion on App Store. After updated finish, i access facebook by safari but not access, i have check line network by PC windown , it is ok. So, i would like to know what happened with i when use Muon Lion? I feel it is bad

I got this WiFi problem immediately after installing ML. I have an Airport Extreme. Then I connected to another WiFi (on some other WiFi box) and the problem dissappeared. WiFi worked OK in Lion.

Similar Messages

ORA-03106 when using OCIStmtFetch! How to fix it?

ORA-03106: fatal two-task communication protocol error.
The version of oracle is 10gR2 and the client and server in the same computer( for developing ) with windows xp sp2. My program use OCIStmtPrepare2 to enable statement cache.
The preparing and executing is ok, oci returns successfully:
OCIStmtPrepare2(svchp, (OCIStmt**)&stmthp, errhp, (OraText*)query.c_str(), (ub4)query.length(), (OraText*)0, (ub4)0, (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT);
OCIStmtExecute(svchp, stmthp, errhp, (ub4)0, (ub4)0, (OCISnapshot*)0, (OCISnapshot*)0, (ub4)OCI_DEFAULT);
The OCIStmtFetch call always failed after several successful calls. Sometimes the first 25 or more OCIStmtFetch calls success, but the next one will faild with ORA-03106, and after this, all oci calls will be failed with this error.
I see the number of threads in oracle process, it always be 22, never changed.
Why this error occurs? Does my program has any fault for this error, or it only matter the oracle configuration?
thanks, i have tried to figure out it for a week...

Because I am writing a library that wraps OCI, so the code is not continuous. I do these things in program:
1. Make a oci session to do some common thing, such create tables and so on, and make other 2 new connection to same oracle server( the completely new, the 2 OCIEnv is allocated), and use these new connections( begin new session with same user/password) to write large amount data to a table in 2 threads. The table contain 6 columns, the first 5 are number(*,0), and the last one is blob.
2. In the data writing mentiond above, the first oci connection is idle, and do nothing. Other 2 connections in threads is busy to write data using "insert" to the same table. I am working in windows xp sp2 and with Oracle 10gR2. When inserting data, I using OCIStmtPrepare2, OCIBindByPos and OCIStmtRelease.
3. It cost about 2 minutes to complete the data writing. The 2 connections is closed after this. I can see the number of threads of Oracle server is decreased.
4. Then I commit the transcation, try to read the data just wrote. I also use OCIStmtPrepare2, and bind all columns of that table. But I do not use lob locator. I bind unsigned char* buffer directly to that lob column, using SQLT_BIN type constant. These operations also in a new thread, not in the main thread of program.
5. So, the error ORA-03106 some times occurs. The reading mentiond above is execute for many times, about 2 seconds one time. And the first 15~30 times successed, but then in one reading, I complete the OCIStmtExecute, but failed in OCIStmtFetch with this error.

Firefox will NOT goto URL when typed in. How to fix?

When I type a URL address in the address bar and then hit enter or the arrow on the right side of the bar Firefox will not go to the URL. It acts as though nothing has been entered.

See if you have the extension "AVG Safe" and if you do disable it, and refer to "Problematic Extensions" an reinstalling AVG Free without the "Link Scanner" and without any other extension they may try to install.
* http://kb.mozillazine.org/Problematic_extensions
When Firefox 8.0 came up, if you have that extension, it should have been right up at the top as a third party extension.

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

"access restrictions" did not work sometimes when using 3-tier DeskI.

My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
But this issue can be solved by logging on from another machine, or restarting the DeskI.
For I can reproduce this issue, so I just want to know that:
1.What is it probably related to?
2.If this issue happens again, what can I suggest my customer for tracking it?
For example, get some log files from servers etc.
Thanks!

Hi Sarah,
Also you can try the following solution.
1. Import the universe.
2. Go to manage access restrictions
3. Remove the restriction .
4. Again create the rescrition and unchecked the " limit size of result set to"
5. Now assign it to the unlimited results group ( this is the name of
the group we have given to those users who should be able to retrieve
more than X rows)
6. Now we save the universe. (Dont export the universe).
I hope this will help you.
Regards,
Sarbhjeet Kaur

HT204074 I have just changed my iPad mini password a day ago when trying to log on today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct. Any help?

I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.

Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G.

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?

My primary keyboard is English UK and secondary one Spanish. Until now when switching keyboards languages the spell check would automatically change to the desired language. Somehow it does not happen anymore. Any ideas on how to fix this?

The keyboard doesn't normally play any role in Apple apps regarding spellcheck. That is determined by system prefs/keyboard/text/spelling. Go the setup item at the bottom of the list and make sure that British English and Spanish are the only two boxes checked, and then set it to Automatic. How well it works varies a lot. You may also need to check Edit > Spelling and Grammar > Show Spelling and Grammar.
If you are still using Pages 4, spellcheck is determined by Inspector > Text > More > Language. Make sure that is set to the right thing for what you want to do.

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive?

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

I changed language from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US? in English

I changed language (based on an answer in this forum) from EN-GB to EN-US but my keyboard is still British (only when using FF). How can I change it to EN-US?
Should I just export my bookmarks, uninstall and reinstall the proper version? That may just be shorter than anything else.

GREAT!. Thanks a lot for educating me. There seem to be a million things we have to learn about our computers and when we run into them the first time they seem insurmountable. You pointed me to the solution. Thanks again. Ben

Update to latest iOS. Keep getting pop up message to "Connect to iTunes to use Push Notifications". This message will not go away. Any ideas on how to fix?

Update to latest iOS. Keep getting pop up message to "Connect to iTunes to use Push Notifications". This message will not go away. Any ideas on how to fix?

Hi
I have the same Problem at my I phone 4s , its killing me all application not working .
now WE NEED HELP ,,,,i could not even know how to connect to I TUNES
Thanks

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My Notes from iPhone are not being saved to Notes in Outlook when I sync. How can i get Notes to back up in Outlook?

My Notes from iPhone are not being saved to Notes in Outlook when i sync. How can I get Notes to back up in Outlook?

I have iPhone 4S

Not access fb when using Muontain Lion? how to fix?

Similar Messages

Maybe you are looking for