Not Adding Extensions on Export

Either batch export or Export as an .avi it does not show an extension.
the wierd thing is that if I try to trick it by naming the sequence something.avi then it adds the extension coming out to something.avi.avi
its frustrating and we do a ton of exporting.. and I hate having to paste .avi to all my clips..
anyone else having this error?
thanks..
Deyson

Gracias.. (thank you)
That was it..Finder had the hide extensions on..
Thanks.. wonder how it got switched..
oh well..

Similar Messages

Exported Files(pictures) not Added to Library

Hello,
I installed Lightroom 4.4 recently. I have been using 2.x for years.
I exported a number of jpg files into a JPG subfolder. These jpgs were generated from cr2 files. The "add to catalog" option was selected. My problem is that not only the exported files/pictures were not added to the catalog but that I cannot add them manually (by syncing the upper-level folder).
I used to do it like this for years and it worked.
Any comments, ideas?
Thank you!

Hello,
Have you found where the files are being exported to?
Are they in the correct place? (IE. where ou expected)
Are you certain the first option of the export dialog was Export to: Same folder as original - and not - Specific Folder before electing a Subfolder of JPG?
Yes to all of the above. The new (exported) files are where I want them to be, i.e., in the same subfolder as the CR2 files. The CR2 files are in one sub-folder named CR2 and the JPG files are in the JPG subfolder named JPG of the same containing folder. I can see/browse/display the exported files in explorer. The export worked as expected and placed the newly generated jpg files in the right place. The only thing that did not work as I would expect it to was that the newly generated files (and folder) were not added to the library. If I remember well this is how my Lightroom 2 was behaving as well. This is not a big deal, or WAS not a big deal as in LT2 I would then synchronize the folder and bring all the exported files into the library.
My current problem is that syncing does not work as it used to; it does not list the JPG folder(s) (or any of the exported jpg files in these folders) as part of what to sync. The folders are physically there but they are not selectable or visible as part of the sync, as if they were already in the library (they are not) or as if they were deliberatly ommitted for some reason...
Do you have any filters active in Lightroom that would hide the jpgs?
I did not turn on any filters on. Where are the filters so that I could check if something is not on by default?
Thanks!

Added preset motions to my interactive pdf file. It's not working when I export my file as an inter

I added preset motions to my interactive pdf file. It's not working when I export my file as an interactive pdf. It's working when I play it on the Preview panel. I must not be doing something right. Does anybody have any clue what I need to do to have my presets motions work when played on Acrobat

So do you mean export the whole document in a swf file format and then bring the whole swf file in and save it as a pdf file. Is there way to export these motion presets seperately and bring them back into Indesign. I wish it was less difficult but I guess there is no way around it for the time being.

Why are most of my keywords not included when I export images?

Why are most of my keywords not included when I export images?
Since starting with Lightroom 1, I've entered keywords into either of the two fields between "keyword tags" and "keyword suggestions" in the keywording panel. I was unaware that some keywords are more equal than others, or that Lightroom offered (or has added?) hierarchy support.
I recently stumbled into the news (to me) that Lightroom tags can be organized into a hierarchy, so I exported my keywords to a text file to examine. I hadn't unwittingly created any hierarchies, but an astounding fraction of the keywords were within square brackets. Sure enough, if I export an image, keywords within square brackets are omitted from the output (jpeg) file. How nice. Since I began with Lightroom 1, I've added nearly 1600 keywords.. Too bad most of them are coded wrong... so as not to accompany output that I create.
1.     What was I supposed to do, as a photographer beginning to use Lightroom, to enter keywords simply but reliably: what I type is what I get? I'd expected that's what the "just type here" interface would provide.
I especially dislike obtaining erratic results: most keywords are in square brackets, but a few are not. Of course, when I use a simplified interface, I should expect not to have access to some of the options or features. However, I shouldn't inadvertently trigger undocumented behavior.
2.     Does the Adobe reference help system say how to enter keywords simply and reliably, in its documentation of the keywording panel? I don't find my answer under the Keywords topic, within Home / Using Photoshop Lightroom 3 / Organizing photos in the catalog.
(I NOW realize that the instructions for the "Create/Edit keyword tags" dialog mention exporting. However, that's not the method I was using.)
Dick Rawson

I'm afraid that I distracted you with my background mention of hierarcharial keywords; I'm not asking about them.
I've entered keywords for several years of using Lightroom. Suddenly, this week, I find that most (yet not all) of them have the attribute of "don't include the keyword in an exported file's metadata." I never intended to ask for that; I thought all keywords will stay with the file and its offspring, and that's what I wanted.
So I'm asking:
1.     What did I do "wrong" to induce Lightroom to give the keywords that attribute? I never intended to ask it to.
2.     Where does Adobe document how to enter keywords reliably so that they stay with the file on output? I can't find that Adobe does.
> Can you be more clear about keywords in square brackets? I know when you export the keywords as a list you can get a normalized data file that uses punctuation and tabs as delimiters...
I did export the keywords into such a list: most keywords in the plain-text list have square brackets surrounding them, indicating keywords that will be omitted from metadata of any image that Lightroom exports.
My concern is not that the brackets are there. They encode the attribute of "don't include the keyword in an exported file's metadata," and recognizing that attribute concerns me.
> ...but I've never seen keywords in image files or in the interface rendered so.
I haven't, either.
Dick Rawson

Raw Images opened and saved as TIFF of PSD in photoshop not added to LR library

Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.

The behaviour you are now seeing when using CS6 is normal when Lightroom and Photoshop are in sync in respect of the ACR level, i.e. the derivative PSD/TIFF is NOT created until you hit Save in PS. When the ACR levels are not in sync (i.e. the PS version is lower than the LR version, as is the case using LR4 and CS5) the "ACR Mis-match" dialog appears (though you may have ticked the "Do Not Show Me Again" box after selecting "Render Using Lightroom") and in that situation the derivative file is created by Lightroom, so you see it appear in LR before it is opened into PS. The fact that the filename that you see in CS6 shows the CR2 extension is not an issue (PS always retains the raw file's full name until it is saved as a derivative file....try opening a raw file directly into CS5/CS6 from outside Lightroom and you'll see), and it will change as soon as you select Save, at which point you should also see the PSD/TIFF appear in Lightroom.
So the only question is, why are you not seeing it? Can you confirm that when you are done in PS that you are selecting "Save" and not "Save As"? And that Lightroom is still running when you do that? And what source are you working from: Folder, Collection, Smart Collection? When you import the PSD, is "Do not import suspected duplicates" cheched or unchecked?

White: not so white after export...

Working with a pilates video, it's shot against white background,but some elements like the foot of a tripod is still shown in the edge of the pic.
I begun working with this in CS3 but after upgrading im now in CS4. Anyways, i've fixed the problem with the tripod showing in the picture by adding a white box on top of it in post but now when i export it in CS4 (media encoder) the white box appears to be somewhat grey...
This never accurred in CS3 when exporting. And now i can't open the project in CS3 anymore since i've been working with it and saving it in CS4...
Anyone have an idea how to fix this? for your information, im editing in 1080(50i), exporting to SD DVD, PAL. The white box is completely white (255,255,255) but it looks like it's grey compared to the white background from the video... Also I haven't used any ICC profile or anything like that. I've also tried making the box in the title editor with the same result...
Im kinda stressed out about this so if anyone have any idea, let me know.
Edit: Im only interessted in making the box color match the background, i'vre read stuff about white not being white after export in other threads but my only concern is the mismatch that causes me problem. Problem that has occured after updating to cs4.

Thanks for the suggestions. Using Garbage matte to mask away the tripod will give the same result as putting a white box on top of the picture, i tried that. I still have to make that white base underneath the masked layer.
I think it has to do with the export. The white box as well as the underlaying layer (when masking) end up gray compared to my video background which is white.
Maby is has something to do with the background in the video beeing over exposed and therefore not 'considered' white by premiere?
Also, have in mind that this problem occurred after upgrading to CS4 .

I reported to Austin Police Department about my unlocked iphone was stolen last week. I'm ****** off that Serial number of my stolen iphone is on another Apple ID. IMEI still is not added into blacklist. How can I contact to Apple Inc??

I don't understand why Austin Police are not doing to detain theft when I showed an location with valid address according Find my iPhone on icloud.com. They said that it might be wrong location but few blocks were correct location. I stopped at Apple Retail Store to get another unlocked iphone. I explained an employee whether they would add both IMEI and serial number into blacklist to make useless for anyone. They said they have nothing to doing.
I'm shocked today that IMEI number is still not added into blacklist. Serialnumber of my stolen iphone is already on another Apple ID, after restoring it.
They let me down because unlocked iphone is EXPENSIVE, it costs $800 in Canada.
How can I deal with Apple Inc to add both serial number and IMEI into blacklist UNTIL i get my stolen iphone back

What blacklist? There is no universal blacklist in the US. They're working on it, but it does not exist as of this writing.
Apple can't do anything about it. They are not a law enforcement agency.

Not been able to export data from FDQM to target system

Hi,
Am not been able to export data from FDQM to my target system which is Hyperion Enterprise 6.4
I have imported, Validated the mapping but as soon as i click on export after creation of the export file the system throws an error as "*Error: Arguments are of the wrong type, are out of acceptable range, or are in conflict with one* *another*". Also am pasting the error log down below
** Begin Enterprise Adapter Runtime Error Log Entry [2009-08-20-16:10:27] **
ERROR:
Code.............. 10230
Description....... Data Load Errors.
Enterprise API Return Code: ALREADY_LOCKED_RO-.
Procedure......... clsHPDataManipulation.fDBLoad
Component......... upsHE6xG4A
Version........... 100
Thread............ 6028
IDENTIFICATION:
User.............. administrator
Computer Name..... HYPERION
ENTERPRISE CONNECTION:
App Name.......... GCIP_S
Connect Status.... Connection Open
GLOBALS:
Zero-For-No....... True
INI File Path..... C:\WINDOWS\HypEnt.ini
NameCat.txt Path.. C:\Hyperion\FDM\GCIP\Outbox\Logs\NameCat.txt
NameCat Entity....
NameCat Category..
NameCat Exists.... False
Any suggestions any one, what should i do

Hello,
Is it possible that the entity that you are loading to in Enterprise is locked? It appears that it may be per the below error. You can only load to unlocked intersections, so I would start by checking the catagory and entity combination for being locked.
Regards
JF

A/P invoice is not adding!

My client is working on SAP B1 8.81 PL05 which was upgraded few days back from 2007B PL14,Since than A/P invoice is not adding and giving the following error message "Enter valid Currency: 4310040000 ms2-173-57)
Please suggest me!
Thanks.........

Hi.......
Welcome to SAP Business One Forum.......
or your solution, You need to set the GL Account Currency to All Currencies.
Do one thing make all the GL Account Currencies in Charts of Account Master as All Currencies. This may solve your problem.
Before finally implement just try it in test DB.......
Regards,
Rahul

Deleting Extension while exporting to Pdf or Postscript only hide it

Hi all,
I need to be able to delete the "ps" or "pdf" extension while exporting to a pdf or postscript file in the printing menu on macosX.
When i try to delete the extension in the saved name, it quote the "hide extension button" and when unquoting the "hide extension" button, the extension re-appears.
How can i change this issue?
Thanks in advance.
Julien.

Welcome to the forums Julien!
I'd be very curious as to the "need" to do this, but it appears you're 100% correct. It seems you can only rename it after the fact to lose the .ps or .pdf.

Not working, Extension in Photoshop CC

Hello Do Not working, Extension in Photoshop CC ... not active why?. OSX 10.9
Chris Zatycki

Please provide more details, including the version of Extension Manager and Photoshop. Also it's better to attach a screenshot.

I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s. I ve tried: dragging to itunes, minimize file name of mp4, adding by file/folder still not adding. WHY? Please help.

I am not able to add videos to itunes. So I am not able to sync them with my IPhone4s.
I ve tried:
dragging to itunes,
minimize file name of mp4,
adding by file/folder, but still not adding.
WHY? Please help.

This is very serious. Your computer got infected with ransom malware, Cryptowall.
Go here for further info.
CryptoWall 2.0 Anything Good about Buying you Keys? - General Security
CryptoWall and DECRYPT_INSTRUCTION Ransomware Information Guide and FAQ

Numbers are not adding in Excel.

Hi ,
I am trying to print few values through grouping in RTF template ...
If you take a look at the below output, when I am trying to add Previous Year column values, the excel is not adding them up. ( mentioned in a note in the picture)
http://i.imgur.com/603Pq.png_
If I add the numbers in Current year column, that works again. Excel is adding the numbers.
The only issue is with previous year column.
Also, When I am trying to add Current year and Previous year in the excel output file (Not in Template)_ previous year values are not being added to current year.
Previous year column is in One data set and Currentyear column from another dataset.
can anyone please help? The user want to perform simple calculations like addition in the report output (Excel output)._
Also, I tried by convert Previous year column values to number in template. This didnt help me either.

Oracle Team,
Can't I get Arabic Native numerals in PDF o/p..? We need a solution urgently.....
We have seen some PDF documents having Arabic native numerals. But why a PDF document generated by Oracle reports is not able to show numbers in arabic style........
I want to know whether it is possible to get Arabic native numerals in PDF o/p generated by 9iDS report builder.
IS anything else needs to be done apart from configuring PDF subset section in uifont.ali in this regard.
Waiting for your reply,
Raj

My Macbook (safari) suddenly thinks it has adblocker but i never installed it and its not in extensions. its blocking a tv site i watch - how to remove it if it's not there?

My Macbook (safari) suddenly thinks it has adblocker but i never installed it and its not in extensions. its blocking a tv site i watch - how to remove it if it's not there?

Check ...
~/Library/Internet Plug-ins
and /Library/Internet Plug-ins

Is there a way to recognize notes added to text in PDF files?

I really miss the add note to text functionality in this application! I am prepared to pay for it since I read documents with hundreds of references (reference by section number only) to sections spaced far appart. This tool makes it easier. I don't like the add sticky note functionality since you have to waist time to place the icon in a convenient space.
In addition, this application does not regocnize notes added to text by Adobe Acrobat Pro.
Please give us the add note to text functionality!!!!

Hi Shradha,
Thank you for your response.
A feature that I miss even more is the ability to move back to a link. I can follow a link but there is no way to go back. So I have to go back to the index to find my place again.
The text that I am reading typically contains 20 references per page in a 800 page document.
Kind regards,
Marius van Wyk
Kind regards
Sent via my BlackBerry from Vodacom - let your email find you!

Not Adding Extensions on Export

Similar Messages

Maybe you are looking for