Not all data could be changed in LC (Message no. /SAPAPO/TS007)

Hi Experts,
When I run forecasting through automodel(strategy 56) in the background, For some combinations I got the warning message "Not all data could be changed in LC" (Message no. /SAPAPO/TS007). What does this message means?
Thanks & Regards
Yogeesha

Hi
Logically whenever you create a new CVCs in APO system you should execute the job /SAPAPO/TS_LCM_CONS_CHECK
by default which will assign time series for the newly created CVCs.
In the following case, it looks like you have created CVCs and than during th FCST job as it does not found the time series for newly created CVCs you received the following errors.
You can execute the report now which will fix the issue, but I will suggest to execute this once CVC job creation is done as regular process.
Please let us know, if this helps to answer you question.
Thanks & Regards
Amol

Similar Messages

  • Error "Not all data could be changed in LC" when running DP macro

    We are getting the error, "Not all data could be changed in LC" when running DP macros and we are not sure why. It seems to only happen when we are executing it via a Process Chain but not using the DP background processing scheduling. Does anyone know why this is happening?

    Hi Stacy,
                         I hope you are seeing this in message spool.  This message comes up for various reasons. We used to see a message saying "No data saved".
    Some of the reasons could be " the new value (lets say 3 ) after the macro execution is same as after execution (3)".
    See if some of the values are fixed and could not be changed.
    I would take a selection id with just few values and execute the job for that selection id and compare the pre and after results. That should answer all your questions.

  • Attribute Change Run aborted with an error :Not all data indexed for index

    Hi,
    I have an issue where the master data Attribute Change Run  aborted with an error pointing to the BWA:
    Attribute Change Run aborted with an error :Not all data indexed for index
    we tried to load only 0 data into it,the error still occured.

    Detail message is following:
    not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
    creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

  • HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

    I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

    Restoring the backup should recover the photos that were in the camera roll at the time of the backup.  If that didn't happen, all you can do is try restoring the backup again.  You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

  • All dates of BOM change

    Hello!
    I'm writing a function that is searching for parts of a model in the BOM. I'm saving the result to a buffer table, so I need to find all dates of BOM change (at all levels). For example:
    01.06.2006 -> BOM created
    07.06.2006 -> material A added at level 4
    14.06.2006 -> material added at level 3
    26.07.2006 -> material deleted at level 1
    30.01.2007 -> material A replaced by B at level 4
    We are using change numbers to keep the history...
    I don't need to know what happend, I want to find out the dates of changes.
    Is it possible to find out these dates without exploding the whole BOM?

    Sorry! I sent this question twice by mistake! Please check my second thread: "BOM change dates". ThanX!
    Message was edited by:
            Donnie Darko

  • Read data from Oracle , not all data brought over

    I have a strange problem when read data from Oracle and save to SQL Server.
    For example , there are 20k rows of data in Oracle , I created SSIS data flow, and data saved in SQL Server , Everything looks fine. But late you will find only first 16k rows of data in SQL Server , the rest is simple missng. no error or any waring. 
    I am using OLE DB .
    Great appreciate for any help.
    Ray

    Thanks. I think that UseSessionFormat=true
    helped me fixed this kind of issue in my other project.
    I actually found out this issue for this case I was asking. I am actually not missing data. It was a data type issue. A column was using a wrong datatype, so when I run a query and didn't get result I supposed. 
     

  • Backed up iphone 4S before updating to ios 6 and now all data is lost. PHOTOS, CONTACTS, MESSAGES ALL GONE. help?!

    Can someone please help...
    Before updating itunes backed up the phone. It then proceeded to update to the ios 6, afterwards when restoring all photos, contacts, messages... all data... was lost. Only the apps were restored back onto the phone. I used a back up from when i first got the phone in 2011 to restore it too so i have some photos and contacts... HOWEVER, over 2000 photos are lost and some contacts still from the recent back up and restore after updating to ios6.
    Any help as to how to get these back?!

    Hi MorganClare990,
    Do you know if you have a backup on another comptuer or maybe iCloud?
    If you had Photo Stream on you might be able to get any photo that is less than 30 days old back from iCloud if you don't have a backup.
    Make sure you have a WIFI connection available and the correct password for that network before continuing with the next steps.
    The easiest way to find out if you have a backup without mixing your boyfreinds data into your iCloud account is to go to Settings > General > Reset > Erase all content and settings.  You will need to be able to connect to the WIFI network to be able to restore your phone from any iCloud backup you have.  If no backup can be found then it will have you setup the iPhone as new and will walk you through the steps to make sure a backup gets created in the future.  If you have to setup as new it will also get photo stream setup and will retrieve any pictures it can.
    Hope this helps and you get your pictures and contacts back!

  • TCP/IP DataInputStream reads not all data send in one time?

    I have a C program that sends 4104 bytes of data to a java client.
    In my java client I have a buffer of 4104 bytes that reads the data using a DataInputStream. Now my problem is that the read function returns with only 1460 bytes instead of 4104 bytes.
    I only have this problem on a new type of PC we are using.
    Now I was wondering when you have a TCP/IP session doesn't every send results in 1 recv (read)?
    Does this differ for various platforms? (is that buffer size adjustable)
    Thanks!

    Alright then I do have a problem.
    If your application level doesn't define a blockthen
    you have problems.So I have to keep reading on the socket untill I get a
    timeout? I saw that DataInputStream has a function
    available(), this should return the available number
    of bytes that can be read without blocking. This
    hardly seems to work?
    I just want to read 1 TCP packet without knowing the
    size or the protocol of the packet without having to
    wait for some timeout. I don't want to reassemble -
    defragmentate all my packets. This question seems very
    reasonable to me, but perhaps I'm missing something?
    There's no guarantee in TCP that a block size N
    written in one application will be delivered as a
    single block to the receiver.Is there a place I can read that specification?Usually people need to understand an API in order to be able to use it. TCP sockets present a continuous stream paradigm: the data stream starts when the connection is established and ends when the connection is closed. Now reread your own question: you want to read a block of data from such a stream without knowing the size of the block. That just makes no sense. It is like trying to read first X bytes from a file stream without actually knowing what X is. The number of bytes available immediately on a socket read is subject to all kinds of random factors on the network and has nothing to do with the amount of data the server is actually trying to send as a "block". That is, a single write() on the server does not necessarily correspond to a single read() on the client.
    A common solution to this problem is to have an implicit block size (that is, it is fixed and known apriory) or prefix your payload with the block size. An example of the latter would be to send the block size as the block header (say, an int in network byte order) so that the receiving end could read the size first and then perform a loop that continuously reads from the socket until it reads exactly the required amount.
    In other words, TCP sockets just provide you with a continuous stream paradigm. You need to impose some kind of an application protocol on top of it to build client-server dialogs. This is what's done behind the scenes by CORBA, RMI, HTTP etc.
    If you need to read up on Berkely socket API specifically, Richard Stevens has written some excellent books.

  • Not all reservation could be blocked

    When we do the CO13,then the system give me the error message"No
    reservations could be blocked".
    What does it mean and how to get rid of this?

    Mayuresh,
    Its looks like some user is in the change mode of the order or performing confirmation, due to this system is not able to allow you to perform the cancellation of confirmation. Request all your users to come out of the order and then you can try.
    Regards,
    Prasobh

  • Not all data in report

    Whenever I create a report and have more than one database I lose part of my data.  I use the smart link because it will not let me link manually.  Is there an easy fix for this.  Also sometimes I get duplication of items.

    Please post this query to the Crystal Reports Design  forum:
    SAP Crystal Reports
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Ludek

  • Not all data on contact syncs to the iCloud

    I have many notes within my contacts in my address book. Since upgrading to icloud, only some of the data within the notes field is syncing. The worst part is, since it syncs half the information to the cloud and then syncs the incomplete contact card back to my mac it permanently erases the data!
    Has anyone noticed this problem? Does it seem possible that I have identified the issue correctly?

    Welcome to the Apple Community.
    I assume you mean sync, not backup.
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

  • 0BP_DEF_ADDRESS_ATTR datasource problems not all data in BW

    Hello!
    I have a BIG problem with business partner address attribute in BW....
    In CRM system I have one million records, however in BW only have 200 000... I have checked the table BUT021 and all is correct... Somebody can help me with this problem, exist some flag or something like this that I must check before load....
    I am doing the DELTA INIT...
    Thanks a lot...

    Hi Rocio,
    The data for the address is time-dependent. Make sure you have that option checked for the info-object in BW.
    For more details check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/2f/fe9a13db67a24dad2766acc03ec0df/content.htm
    Bye
    Dinesh

  • Not all PDF could be viewed as thumbnail?

    When I choose the thumbnail view in Windows Explorer, some PDF could show the 1st page as the thumbnail, however some couldn't(the Adobe PDF logo instead).
    I've noticed this for a while, and tried to find out why.
    To my surprise, it seems this happens regardless of the content/version of the PDF file, nor the version of Adobe Reader/Windows.
    Could anyone show me the truth?

    This is a question for the Acrobat or Reader support forums, not here...

  • Not all data displayed

    Good Afternoon;
    I have an rdl report written in 2008 R2. When running the report in BIDS, I get back all the data I expect. However, there is a difference as to what is displayed in the ReportViewer regular view vs. the Print Layout view. In the regular, I only see data
    up to a certain point. In the Print Layout, I see all the data.
    In Print Layout there are 310 pages to the report. It looks like the data cuts off on what would be page 256 in the print view, in the regular view. (No page breaks in regular view)
    Is there some kind of limit on how much data is displayed in the regular view?

    No, only 1 of 1. Looking at the row groups, there were no page breaks added in anywhere. So basically it's trying to put all the data on one page. Is there some sort of limit as to the amount of data a "page" can handle?

  • Not All Data Synchronizing

    I got a Blackberry Curve for Christmas, and I'm using BBDesktop 4.7 to synchronize my contacts and calendar with my desktop Outlook profile.  And, at first, it seemed to have worked.
    However, upon closer inspection, I find that all that's synchronizing is e-mails and phone numbers; what I really want is mailing addresses.  I've looked around the support center and the forum trying to find a solution, but no luck.
    Any help would be greatly appreciated.  Thanks in advance!

    Hello,
    that's an easy one. In the desktop manager, look for an option that will allow ou to choose what field in an Outlook contact goes in front of what field in a Blackberry Address Book item.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for