Not all data displayed

Good Afternoon;
I have an rdl report written in 2008 R2. When running the report in BIDS, I get back all the data I expect. However, there is a difference as to what is displayed in the ReportViewer regular view vs. the Print Layout view. In the regular, I only see data
up to a certain point. In the Print Layout, I see all the data.
In Print Layout there are 310 pages to the report. It looks like the data cuts off on what would be page 256 in the print view, in the regular view. (No page breaks in regular view)
Is there some kind of limit on how much data is displayed in the regular view?

No, only 1 of 1. Looking at the row groups, there were no page breaks added in anywhere. So basically it's trying to put all the data on one page. Is there some sort of limit as to the amount of data a "page" can handle?

Similar Messages

HELP iPhone 5 got reformatted while being updated. not all datas recovered from iCloud.

I recently updated my iphone5 with iOS 7.0.3 but while updating it was reformatted. I tried to recover my apps and photos from iCloud but not all datas were recovered. I am sure that I was able to back up my phone regularly. Only new photos were recovered the older ones which were the first ones that I backed up cant be found. Can I still recover those datas?

Restoring the backup should recover the photos that were in the camera roll at the time of the backup. If that didn't happen, all you can do is try restoring the backup again. You might try some of the tips mentioned in this discussion thread that other's found useful when they had a similar problem, such as the one by ezjules: https://discussions.apple.com/message/19518589#19518589.

Error "Not all data could be changed in LC" when running DP macro

We are getting the error, "Not all data could be changed in LC" when running DP macros and we are not sure why. It seems to only happen when we are executing it via a Process Chain but not using the DP background processing scheduling. Does anyone know why this is happening?

Hi Stacy,
I hope you are seeing this in message spool. This message comes up for various reasons. We used to see a message saying "No data saved".
Some of the reasons could be " the new value (lets say 3 ) after the macro execution is same as after execution (3)".
See if some of the values are fixed and could not be changed.
I would take a selection id with just few values and execute the job for that selection id and compare the pre and after results. That should answer all your questions.

Not all data could be changed in LC (Message no. /SAPAPO/TS007)

Hi Experts,
When I run forecasting through automodel(strategy 56) in the background, For some combinations I got the warning message "Not all data could be changed in LC" (Message no. /SAPAPO/TS007). What does this message means?
Thanks & Regards
Yogeesha

Hi
Logically whenever you create a new CVCs in APO system you should execute the job /SAPAPO/TS_LCM_CONS_CHECK
by default which will assign time series for the newly created CVCs.
In the following case, it looks like you have created CVCs and than during th FCST job as it does not found the time series for newly created CVCs you received the following errors.
You can execute the report now which will fix the issue, but I will suggest to execute this once CVC job creation is done as regular process.
Please let us know, if this helps to answer you question.
Thanks & Regards
Amol

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

have you tried rebooting your computer?

Filtering in excel - not all options display in drop down list

I have found an issue with the filter drop-down list in Excel 2010. I have now been upgraded (by my employee) to Excel 2013 and same problem still exists.
Problem: I highlight the row containing the column headings; then click on filter (available via the Home tab); then click on the down arrow in the column of interest (in this case "Council Names" column); the drop-down window appears but not all
council names are displayed in the selection list, even though those council names are still in the list. I am aware of the 10,000 option limit with the selection list, but my spread sheet has well under 10,000 rows (unless there is something hidden that I
do not know about).
I have found work-arounds for the problem by searching google for answers to similar problems. I have also spoken to my employee's IT HelpDesk. I will explain the work-arounds I have found below. However, my main concerns now are:
(1) What is the cause of the problem? Is there are better fix that addresses the cause, rather than having to use work-arounds?
(2) Is the issue an indication that the spread sheet has been corrupted in some way? - I need assurance that this is not an indication that the spread sheet is unstable and such problems could multiply or already be existing. (The reason I ask
this is that I had an earlier version of the same spread sheet where the problem did not occur, but it appeared in a later copy - could the copying of the sheet/workbook have caused the problem?)
Workarounds found:
(1) Select the entire sheet, then select the filter button in Home tab
(2) select all the columns manually (click in top left cell and drag down until all data selected), then select filter button
(3) Ensure all rows in the column of interest are filled in, then select filter button
I would really appreciate any answers/assistance.

Hi Jan,
Thank you very much! Yes you are right - I have looked at the Current Region and the Council Names within that region match those in the filter list. The Current Region does not contain the entire sheet.
[By the way - there were some errors in my original post: employee should be employer and in my description of the problem the following should read
"...even though those council names are still in the spread sheet". I assume that this would not change your response?]
Further questions
(1) It is odd, though, that an earlier version of the same spread sheet had a complete list of council names (the current range on this sheet contains all of the required rows of the sheet). How did the current region change between versions (I did not knowingly
do it)?
(2) Does the above mean that the file, workbook or spread sheet is damaged/corrupted in some way? If yes, can this be corrected and how?
(3) In addition to (2) above - what is the safest way to copy an excel workbook to minimise risk/avoid future corruption? [I have been copying and keeping earlier versions, partly for testing reasons, but also as a safety measure for the project as
we are making changes all the time and may decide we wish to go back to the previous version(s)].
Regards and thanks again,
Bea Rogers.

Vision M - Not all music displaying in creative Media Explo

When i connect my Vision M to my PC and go into creative Media explorer not all the artists are displayed in the drop down list, i can find them when i go into Creative Media Organizer though..does anyone have any suggestions as to why this would be

Thanks - I've already tried to reinstall the software and there is no update in the download section of microphoto for the Media Explorer.

Read data from Oracle , not all data brought over

I have a strange problem when read data from Oracle and save to SQL Server.
For example , there are 20k rows of data in Oracle , I created SSIS data flow, and data saved in SQL Server , Everything looks fine. But late you will find only first 16k rows of data in SQL Server , the rest is simple missng. no error or any waring.
I am using OLE DB .
Great appreciate for any help.
Ray

Thanks. I think that UseSessionFormat=true
helped me fixed this kind of issue in my other project.
I actually found out this issue for this case I was asking. I am actually not missing data. It was a data type issue. A column was using a wrong datatype, so when I run a query and didn't get result I supposed.

Spry Data Set: not all members displaying

I have a simple data set showing membership in a group. About 100 members with 5 columns of information. When I preview the results only about 30 members are showing up & they are in the middle of the alphabet. I have not had problems updating the lsit in the past but now I am.
Unfortunately I cannot show an example because the information is password protected for members only.
Here is the code:
<script src="../SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="../SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
<div spry:region="HSP">
<table width="100%" class="Directory">
        <tr class="Directory">
          <th spry:sort="First_Name">First_Name</th>
          <th spry:sort="Last_Name">Last_Name</th>
          <th spry:sort="Company">Company</th>
          <th spry:sort="Phone">Phone</th>
          <th spry:sort="E-MAIL">E-MAIL</th>
          <th spry:sort="WebPage">WebPage</th>
        </tr>
        <tr class="Directory" spry:repeat="HSP" spry:odd="DirectoryOddRow" spry:even="DirectoryEvenRow" spry:hover="DirectoryHover" spry:select="Directory">
          <td class="Directory">{First_Name}</td>
          <td class="Directory">{Last_Name}</td>
          <td class="Directory">{Company}</td>
          <td class="Directory">{Phone}</td>
          <td class="Directory"><a href="mailto:{E-MAIL}" >{E-MAIL}</a></td>
          <td class="Directory"><a href="http://{WebPage}" target="_blank" >{WebPage}</a></td>
        </tr>
      </table>
    </div>

Arnout,
The table structure got messed up when I exported the CSV from the spreadsheet.
A few rows had an extra cell on the end I couldn't see. Thank you.

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

When I login to Outlook Exchange for office email not all emails display. I use Safari on a home Mac. My PC at work shows all emails in the inbox

This problem started a couple of months ago. I only receive about 25% of my inbox when I login remotely to the webmail exchange account. My inbox on my office PC is fine but the emails do not display in my inbox when I login to the webmail exchange account.
THis happens on other Mac computers, not just my personal computer at home. It's the same thing when I login from my gym

Does the Outlook Exchange client is up-to-date?

Not all data in report

Whenever I create a report and have more than one database I lose part of my data. I use the smart link because it will not let me link manually. Is there an easy fix for this. Also sometimes I get duplication of items.

Please post this query to the Crystal Reports Design forum:
SAP Crystal Reports
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Not all services display on Azure Portal (preview)

I've had 2 subscriptions and these show up correctly on manage.windowsazure.com and portal.azure.com
I added a new subscription (bizspark) and had services on one subscription migrated to the bizspark subscription
manage.windowsazure.com shows everything correctly; all my sites, services show up
portal.azure.com does not show my new subscription: its plans, websites, etc do not show up here.
I know that portal.azure.com is under preview, and on top of that, maybe the migration from one subscription to another one left something out; but it seems like there is a bug., so I wanted to report that somewhere....

Hi,
Apologies for the inconvenience. Some customers in the Azure Preview Portal (portal.azure.com) will not see their data when accessing Usage reports and querying Diagnostic Search. There is no actual data loss. We are engaged in executing a mitigation plan
to resolve the issue with viewing the data. Our engineering teams are working on this to ensure service availability is returned to normal as soon as possible. I would advice you to wait for sometime.
To know about the status, please monitor the below page
http://azure.microsoft.com/en-us/status/
Regards,
Sowmya

TCP/IP DataInputStream reads not all data send in one time?

I have a C program that sends 4104 bytes of data to a java client.
In my java client I have a buffer of 4104 bytes that reads the data using a DataInputStream. Now my problem is that the read function returns with only 1460 bytes instead of 4104 bytes.
I only have this problem on a new type of PC we are using.
Now I was wondering when you have a TCP/IP session doesn't every send results in 1 recv (read)?
Does this differ for various platforms? (is that buffer size adjustable)
Thanks!

Alright then I do have a problem.
If your application level doesn't define a blockthen
you have problems.So I have to keep reading on the socket untill I get a
timeout? I saw that DataInputStream has a function
available(), this should return the available number
of bytes that can be read without blocking. This
hardly seems to work?
I just want to read 1 TCP packet without knowing the
size or the protocol of the packet without having to
wait for some timeout. I don't want to reassemble -
defragmentate all my packets. This question seems very
reasonable to me, but perhaps I'm missing something?
There's no guarantee in TCP that a block size N
written in one application will be delivered as a
single block to the receiver.Is there a place I can read that specification?Usually people need to understand an API in order to be able to use it. TCP sockets present a continuous stream paradigm: the data stream starts when the connection is established and ends when the connection is closed. Now reread your own question: you want to read a block of data from such a stream without knowing the size of the block. That just makes no sense. It is like trying to read first X bytes from a file stream without actually knowing what X is. The number of bytes available immediately on a socket read is subject to all kinds of random factors on the network and has nothing to do with the amount of data the server is actually trying to send as a "block". That is, a single write() on the server does not necessarily correspond to a single read() on the client.
A common solution to this problem is to have an implicit block size (that is, it is fixed and known apriory) or prefix your payload with the block size. An example of the latter would be to send the block size as the block header (say, an int in network byte order) so that the receiving end could read the size first and then perform a loop that continuously reads from the socket until it reads exactly the required amount.
In other words, TCP sockets just provide you with a continuous stream paradigm. You need to impose some kind of an application protocol on top of it to build client-server dialogs. This is what's done behind the scenes by CORBA, RMI, HTTP etc.
If you need to read up on Berkely socket API specifically, Richard Stevens has written some excellent books.

Not all data displayed

Similar Messages

Maybe you are looking for