Not all drives available for export?

Hi,
I'm new to Lightroom (3.2 on Windows 7 64 Bit) so please bear with me if it should be a known problem - couldn't find an answer in the forum or help so far:
When I want to export images, more often than not I only see my user folder in the window that pops up when I select the "Choose..." button in the export dialog, but I don't want to put anything there - I never use these default folders for anything.
Also, my catalog is on E:, not in the user folder on C: so LR is actually accessing other drives...
All other drives and folders are simply missing in the folder selection window (I have never seen this window being reduced to the user folder that way before).
The weird thing is, I was able to use all my other drives and folders before. I even created presets for this, but when I try to export with one of those presets, instead of exporting to that other drive, I again get that reduced folder selection window with only my user folder.
ATM this makes Lightroom hardly usable so I would be very thankful for any hint on what this could be related to.
This happens randomly BTW - sometimes it works, most times it doesn't.
Thanks for any pointers!
Cheers,
Thomas Helzle

To follow up on this:
I tried to run Lightroom as an Administrator - no luck, the problem stayed the same.
I restarted my machine - no luck either.
I had to export my images to my user folder and afterwards move them to where I need them.
Very annoying.
But just minutes ago I actually was able to solve it in a very curious manner:
In the select Folder Dialog you get when you hit the Choose... Button in the export sceeen, I copied the full path to the drive and folder into the line where normally you only see the selected folders name - and guess what: All my drives are suddenly back visible, I can work normally now.
I have no clue what kind of weird bug this is, but it is definitely NOT a normal behaviour of a windows file dialog.
Cheers,
Thomas Helzle

Similar Messages

In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

Error msg - not enough memory available for this task - chm file

Hi All
I am using RoboHelp for HTML 8.0 and creating chm file. I am using context sensitive help and the F1 key functionality. I have in the past created some map ID's with F1 and they have worked properly with our company software application. Now, I have a different database with our company and a larger help file and it is not working. I am told that the database should work. I also have lots of memory. I am working off of my hard drive which is where the .exe is for the company application and my chm file. I can open my .chm file. When I go into the application and press F1 where I created the map ID;s I get the message, not enough memory available for this task and also topic not available. Quit one or more programs to increase memory.
I have lots of memory and my file is only 598kb. I also only have RoboHelp and the application running. When I did a search, I found an article for a fix from 2004 from Adobe - Rb_46124 - not sure if this is the fix but the steps dont match since it is old.
Please help me.
Thanks
Caryn

Hi there
Actually, if you were to use FlashHelp output, you might find that the problems are compounded, as now you have the Flash Player and all its idiosyncrasies in the mix.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini?

Is there a faster hard drive available for the 1.83Ghz Dual Core MacMini? Since this is the slowest component of the whole system is there a way to upgrade to something faster (possibly a 7200RPM drive)?
thanks,
Jeff

Ways to make it faster:
1) Be sure you aren't running any Rosetta apps or drivers. Watch out for print drivers. You can use Utilities > Activity Monitor to spot the legacy stuff that uses Rosetta. (Make sure the pop-down menu at the top of the Activity Monitor window says "All Processes", not just "My processes".)
2) Max your RAM to 2 Gigs. You can't go to 3 Gigs since you only have the CoreDuo CPU.
3) Whatever hard drive you use, keep at least one-third of it empty. Obviously this will be easier with a large external firewire drive.
4) 3.5 inch drives will be faster than 2.5 inch drives -- even at the same RPM. So again, external will be the way to go, since Minis can only take 2.5 inch internals.
If you want an external that stacks under the Mini, some examples are here:
http://www.123macmini.com/accessories/guide/enclosures.html
(The NewerTech and WiebeTech models appear to have good reputations, though I have no personal experience with them.)
But again, all of the factors I mention above will affect performance.

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

Do we have driver available for Lake Shore Model 128 temperature sensor?

Do we have driver available for Lake Shore Model 128 temperature sensor? I want to make sure before we start writting our own drivers to communicate with this hardware.
Thanks,
Marivell Baez

Hi Marivell,
Take a look at ni.com/idnet. A quick browse found Lake Shore Cryotonics Temperature meters here: http://sine.ni.com/idnetwork/main/p/sn/n25:LM/sb/navsRel?q=lake+shore+temperature&x=0&y=0
This may not be what you are looking for though and consulting with your user manual for the appropriate commands to be sent would get you in the right direction for creating a complete set of Sub-VIs. Is this device a sensor or a meter controlled via an instrument protocol (GPIB, Serial, LAN, etc.)
PBear
NI RF

Model 15-d006TU all driver link for windows 7

plz plz plz
model 15-d006TU all driver link for windows 7

Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere.

Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

Apple is great!
Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).
I compose an iMessage with the destination as my email address and I attach 2 photos I want on my PC. I send them several times from my iPhone 5C but they never arrive. I look at my ipad later and realize that it's iMessage app is getting ( and swallowing) these emails. I then turn the ipad off. Still can't get the photos through because iphone is now getting them on it's iMessage. I turn off the iMessage feature and try to send photos from text msging. Phone tells me it can't send photos unless iMessage it turned on. What happened to regular MMS text messaging? I go and try to send photos as an email attachment and see that there is no option to attach from the stupid email program. I look up online to learn about the brave new world of apple attachments and send them.
Why is iMessage taking my incoming emails and then not making them available for my PC to get?
The email program on my iphone is not configured to remove messages from the server.
If iMessage is turned off I don't have the issue.
Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).

Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

How can I find the all path available for a MPLS VPN in SP network

How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

Is there driver available for Yokogawa 2423 thermometer?

Is there Labview driver available for Yokogawa 2423 Portable Multi Thermometer? Or can I use some other device driver for same purpose? This device is quite old, from late 80's. I would still like to use it with WinXP, Labview 7.1 and rs-232 connection.

You can search for LabVIEW instrument drivers at the ni.com/idnet Instrument Driver Network. The site has over 3000 instrument drivers and several other resources if you can't find exactly what you are looking for. For instance, you can make a request for a particular instrument driver, or you can view tools on how to create your own.
I did a quick search for your instrument, but I couldn't find the exact model. However, you may be able to download similar ones from the site that you can modify for your purposes.

Vf0040 driver - available for Mac?

Someone gave us a vf0040 webcam. I don't understand what driver works with it on a pc. I also want to know if there's a driver available for Mac.

That was an entry level color laser printer that was never designed to work with OS X. However I did find this thread:
https://discussions.apple.com/thread/1234447?start=0&tstart=0
Good luck!

Is there an external hard drive available for Lion?

Is there an external hard drive available for Mac OS X v10.7?

How big of a drive do you want? Western Digital USB MyPassport drives work great and are inexpensive. You can buy them Mac formatted or just buy one that isn't and use Disk Utilities to format it for a Mac. As far as I know any of the external drives will work with OS X Lion.
I use a 500GB MyPassport. My MacBook Pro mid-2010 has a 320GB drive and i'm using less than 60GB so the 500GB external is plenty for my back up needs. I use it with Time Machine and SuperDuper! (for bootable images) in Lion.

Best driver available for MicroSoft SQL server?

Hi,
I am using MS-SQL server for my application server.
Which driver should i use for it?
Right now I am using ODBC driver.
Please suggest me a few links where i could get the best driver(thin driver) for SQL server.
regards
suri

Hi,
best driver available for MicroSoft SQL server?i-net software has written a solid JDBC driver based on TDS. The trial version is limited to a single connection. http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
jTurbo provides jdbc driver for MS SQL Server (www.jTurbo.com).
Merant technologies also provides jdbc driver for MS SQL Server. Find more details at http://www.microsoft.com/sql/downloads/2000/jdbc.asp.Microsoft licenses MERANT's JDBC driver for SQL Server 2000.
I cannot comment which one is the best driver. It depends on your project requirements and the buget alloted.
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Sysytems
http://www.sun.com/developers/support/

Lightroom not showing all photos avail for import

About a week ago, I tried to import some new photos into LR 3 (3.4.1 to be exact), and the import dialogue does not show all the photos that should be available for import.
The files are on my hard drive and there are approximately 200 photos in the file folder. When I open LR's import dialogue to import the photos (after navigating to the proper location to import from of course), it shows me 17 of the photos in the file folder! I selected "all" instead of "new" to see if that would make a difference and it did not. I made sure I did not have "do not import suspected duplicates" checked, even closed LR and rebooted my computer.... that didn't work.
I tried creating a new catalog to see if that would fix the issue, and it did not.
I'm not sure what else to try, or if there is a known fix out there (having a heck of a time finding one in my internet search!)
Any ideas/suggestions?
Thanks!
-KBP

Okay, so for giggles I tried checking in the Bridge to see if that changed anything... and it only showed the few files too. So I decided to "select all" and noticed at the bottom left that it listed the balance of my photos as "hidden." I have no idea how my files got hidden, or why it was only some and not others... but at least it's all fixed now and I can get back to what I need to do in LR!

Not all drives available for export?

Similar Messages

Maybe you are looking for