Not all EPMA Services are Starting 11.1.2

I am facing unique situation with EPMA Services on Windows 64 bit and Oracle 11g environment. All other products (FS, Essbase, Planning, Workspace) are working fine. Also, EPMADataSynchronizer and EPMAWebTier services are running fine.
Issue: When Processor Manager is started, only .Net JNI Bridge starts and others do fail to start. Upon looking at the Even Viewer, following error is being thrown.
*Service cannot be started. System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.ThrowHelper.ThrowKeyNotFoundException() at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Hyperion.DataAccessLayerCore.SchemaCatalog.get_Item(Type index) at Hyperion.DataAccessLayerCore.SchemaCommand`1.get_m_schema() at Hyperion.DataAccessLayerCore.SelectCommand`1..ctor(DataAccessLayer dataAccessLayer) at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams) at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback) at Hyperion.SessionManager.DAO.SessionManagerDAO.LoadSessions(Action`1 action) at Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.GetAllSessions() at Hyperion.DimensionServer.SessionManager.SessionManager.LogoutAllUsers() at Hyperion.DimensionServer.ProcessManager.ProcessManager.UnInitializeSessionManager() at Hyperion.DimensionServer.ProcessManager.ProcessMan...*
I have read other issues related to SQL Server (port 1433) and EMPA services in this forum and Cameron's blog. But nothing related to this issue.
Thanks for your help in advance!
Venu
Edited by: VenuRamini on Oct 8, 2010 6:14 PM

Jasmine:
Here is info from Configtool_summary.log
---- Product Configuration Summary.....
( Oct 2, 2010 4:36:50 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 4:36:51 PM ): Pre-Configuration :: pass
( Oct 2, 2010 4:36:51 PM ): Common Settings :: pass
( Oct 2, 2010 4:36:54 PM ): Configure Database :: pass
( Oct 2, 2010 4:37:19 PM ): Configure Oracle Configuration Manager :: pass
( Oct 2, 2010 4:46:25 PM ): Pre-Configuration :: pass
( Oct 2, 2010 4:46:25 PM ): ---- Workspace Configuration......
( Oct 2, 2010 4:46:26 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 4:46:27 PM ): ---- Workspace Configuration......
( Oct 2, 2010 4:46:27 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 4:50:28 PM ): ---- Workspace Configuration......
( Oct 2, 2010 4:50:28 PM ): Deploy to Application Server :: pass
( Oct 2, 2010 4:50:28 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 4:50:28 PM ): Deploy to Application Server :: pass
( Oct 2, 2010 4:50:32 PM ): ---- Workspace Configuration......
( Oct 2, 2010 4:50:32 PM ): Deploy to Application Server :: pass
( Oct 2, 2010 4:50:32 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 4:50:32 PM ): Deploy to Application Server :: pass
---- Product Configuration Summary.....
( Oct 2, 2010 6:24:36 PM ): ---- Hyperion Foundation Configuration......
( Oct 2, 2010 6:24:36 PM ): Pre-Configuration :: pass
( Oct 2, 2010 6:24:41 PM ): ---- Provider Services Configuration......
( Oct 2, 2010 6:24:41 PM ): Pre-Configuration :: pass
( Oct 2, 2010 6:24:47 PM ): ---- Studio Configuration......
( Oct 2, 2010 6:25:14 PM ): Pre-Configuration :: pass
( Oct 2, 2010 6:25:15 PM ): Register with Shared Services :: pass
( Oct 2, 2010 6:25:16 PM ): Configure Database :: pass
( Oct 2, 2010 6:25:21 PM ): ---- Essbase Administration Services Configuration......
( Oct 2, 2010 6:25:21 PM ): Register with Shared Services :: pass
( Oct 2, 2010 6:25:23 PM ): Configure Database :: pass
( Oct 2, 2010 6:25:23 PM ): ---- Provider Services Configuration......
( Oct 2, 2010 6:25:23 PM ): ---- Essbase Administration Services Configuration......
( Oct 2, 2010 6:26:17 PM ): ---- Provider Services Configuration......
( Oct 2, 2010 6:26:17 PM ): Deploy to Application Server :: pass
( Oct 2, 2010 6:26:17 PM ): ---- Essbase Administration Services Configuration......
( Oct 2, 2010 6:26:17 PM ): Deploy to Application Server :: pass
( Oct 2, 2010 6:26:22 PM ): ---- Essbase Integration Services Configuration......
( Oct 2, 2010 6:26:22 PM ): Pre-Configuration :: pass
( Oct 2, 2010 6:26:27 PM ): ---- Essbase Configuration......
( Oct 2, 2010 6:26:41 PM ): Pre-Configuration :: pass
( Oct 2, 2010 6:26:42 PM ): Register with Shared Services :: pass
( Oct 2, 2010 6:29:21 PM ): Essbase Custom Configuration :: pass
---- Product Configuration Summary.....
( Oct 4, 2010 5:05:41 PM ): ---- Hyperion Foundation Configuration......
( Oct 4, 2010 5:05:41 PM ): Pre-Configuration :: pass
( Oct 4, 2010 5:05:47 PM ): ---- Performance Management Architect Configuration......
( Oct 4, 2010 5:05:50 PM ): Pre-Configuration :: pass
( Oct 4, 2010 5:05:50 PM ): Register with Shared Services :: pass
( Oct 4, 2010 5:05:53 PM ): Configure Database :: pass
( Oct 4, 2010 5:05:54 PM ): Configure Interface Data Source :: pass
( Oct 4, 2010 5:05:56 PM ): Create EPMA Virtual Directory :: pass
( Oct 4, 2010 5:06:01 PM ): ---- Calculation Manager Configuration......
( Oct 4, 2010 5:06:01 PM ): Pre-Configuration :: pass
( Oct 4, 2010 5:06:02 PM ): Register with Shared Services :: pass
( Oct 4, 2010 5:06:02 PM ): Configure Database :: pass
( Oct 4, 2010 5:06:03 PM ): ---- Performance Management Architect Configuration......
( Oct 4, 2010 5:06:03 PM ): ---- Calculation Manager Configuration......
( Oct 4, 2010 5:07:55 PM ): ---- Performance Management Architect Configuration......
( Oct 4, 2010 5:07:55 PM ): Deploy to Application Server :: pass
( Oct 4, 2010 5:07:55 PM ): Deploy to Application Server :: pass
( Oct 4, 2010 5:07:55 PM ): ---- Calculation Manager Configuration......
( Oct 4, 2010 5:07:55 PM ): Deploy to Application Server :: pass
---- Product Configuration Summary.....
( Oct 7, 2010 10:26:45 AM ): ---- Hyperion Foundation Configuration......
( Oct 7, 2010 10:26:46 AM ): Pre-Configuration :: pass
( Oct 7, 2010 10:48:28 AM ): Configure Web Server :: pass
---- Product Configuration Summary.....
---- Product Configuration Summary.....
( Oct 8, 2010 11:00:49 AM ): ---- Hyperion Foundation Configuration......
( Oct 8, 2010 11:00:49 AM ): Pre-Configuration :: pass
( Oct 8, 2010 11:01:49 AM ): Configure Web Server :: pass
---- Product Configuration Summary.....
( Oct 8, 2010 1:56:00 PM ): ---- Hyperion Foundation Configuration......
( Oct 8, 2010 1:56:00 PM ): Pre-Configuration :: pass
( Oct 8, 2010 1:56:46 PM ): Configure Web Server :: pass
---- Product Configuration Summary.....
( Oct 8, 2010 4:38:48 PM ): ---- Hyperion Foundation Configuration......
( Oct 8, 2010 4:38:48 PM ): Pre-Configuration :: pass
( Oct 8, 2010 4:39:35 PM ): Configure Web Server :: pass
---- Product Configuration Summary.....
---- Product Configuration Summary.....
( Oct 11, 2010 1:21:07 PM ): ---- Hyperion Foundation Configuration......
( Oct 11, 2010 1:21:08 PM ): Pre-Configuration :: pass
( Oct 11, 2010 1:24:21 PM ): Configure Web Server :: pass
Here is info from Configtool.log:
No error from date I originally configured but there is following error with today's date (configured HFM).
[2010-10-11T13:21:07.975-04:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 21] [ecid: 0000IiSJo4dEcLPMyeR_6G1CgoQz00000C,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-10-11T13:24:12.397-04:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 21] [ecid: 0000IiSJo4dEcLPMyeR_6G1CgoQz00000C,0] [SRC_CLASS: com.hyperion.cis.utils.Shortcut] trace: shortcut out:Microsoft (R) Windows Script Host Version 5.7[[
Copyright (C) Microsoft Corporation. All rights reserved.
That is about it.
Thanks again!
Venu

Similar Messages

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.muli

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?

found it in another area
Where do I find the cc getting started Katies.mulib File ?

I have three "pages" of apps, not all of which are full. How do I move an app from one page to another to consolidate?

I have three pages of apps, not all of which are full. How do I move apps from one page to another to have full pages?

Hook your iPad up to your computer and iTunes and move them from within iTunes.
Or
Hold down on one of your apps until they all start to wiggle. Then hold down on the ones you want to move and drag them on the screen. Drag them to the middle left to move them left,(such as from page 2 to page one) middle right ot move them right,(from page 2 to page 3) rearrange as you want.
When you're done, tap the home key and everything should stop wiggling.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

If on a computer browser you go to icloud.com and sing in are you notes there? If so get them off.
Next,
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the iCloud account from the iPod,. Note this does not delete the account, only deletes it from the iPod. Then sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Not all selected pictures are shared in album sharing in Photostream

I am trying to share an album with my friends on photostream. After i selected the album, added the friends, and waited for ever to upload the pictures, I realized that not all the pictures are available on the shared album. So i had to go back again and check the photos one by one to see what has been uploaded and what is missing to reupload them manually. This can get very tiring in large albums.
I guess mmy question is this:
Why is it doing that ? and how can i avoid such behaviour?
Is there a way that i can monitor / check the photos uploaded to make sure that the full album is there online ?

Hello Karim Zaafan,
Thank you for using Apple Support Communities!
I was thinking that it might be a good idea to see if perhaps you are bumping up to the limits of Shared Photo Streams.
iCloud: Photo Stream limits
http://support.apple.com/kb/HT4858
Shared Photo Stream limits
The current Shared Photo Stream hourly and daily limits are as follows:
Maximum number of photos to share per hour: 1,000
Maximum number of photos to share per day: 10,000
These sharing limits are separate from the upload limits above. For example, in the same day you could upload 10,000 photos to My Photo Stream and then share those 10,000 photos, or 10,000 other photos.Some additional limits for Shared Photo Stream usage:
Maximum shared streams an owner can share: 100
Maximum shared streams a user can subscribe to: 100
Maximum subscribers per shared stream: 100 (the number of subscribers on each shared stream)
Maximum number of photos per shared stream: 1,000
Maximum number of comments per shared stream photo: 200 (a comment can be either a like or a text entry)
Maximum characters per comment: 200
Maximum number of invites a shared stream owner may send per day: 200
Also I would recommend this precautionary step from iCloud: Photo Stream troubleshooting found http://support.apple.com/kb/TS3989
Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
Cheers,
Sterling

Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

I preordered an album but not all the songs are showing up. They say purchased but wont go into my itunes library or onto my iphone. Please help.

They say purchased but wont go into my itunes library or onto my iphone. Please help.

Hey there aussieboss123,
It sounds like you are wanting to download an album that you pre ordered, not all the songs are downloading. First, use this section of the following article to see if the tracks download:
Download a pre-ordered item
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
If you enabled the option to automatically download prepurchased content in iTunes, then your pre-ordered content may already be in your library. If not, click the download link provided in your email notification, and your pre-ordered content will begin to download. You can also use the Check for Available Downloads feature in iTunes on your computer (choose Store > Check for Available Downloads) to begin downloading your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
If it does not, I would use the following article to report a problem with the purchase to the iTunes Store support directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Cheers,
Sterling

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

Not all physical samples are valuated, force inspection completion?

Hi
I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
What is missing or how can I avoid this message?

In QE23, Select the inspection lot and check for the physical sample,
Once you enter both, you will get the screen similiar to QE51 to record result,
You will see a button for physical sample which u need to select and do the valuation.
hope this helps

HT4759 not all my contacts are being sync from my IPad or IPhone to ICloud?

When backing up IPhone 5s or Mini IPad retina, not all my contacts are backing up or showing in ICloud?

I assume that you have enabled contacts syncing with iCloud in Settings>iCloud on your devices. If so, and some of your contacts don't appear on icloud.com, open the contacts app and tap Groups. Do you have any non-iCloud accounts listed such as On My iPhone (iPad), Gmail, Yahoo or an exchange account?
Also, go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account?

Can I apply any application patch when all application services are down?

Hello All,
Can I apply any application patch when all application services are down?
Reg
Chirag Patel

Definitely you can. On some operating system (like Windows), if relinking is part of the patch then you cannot apply patches unless Application services are down.
Whenever we apply a patch, we enable maintenance mode through adadmin, this would stop users from accessing the application during patch installation. However, you still can use "adpatch options=hotpatch" to apply a patch without enabling maintenance mode.

When I export a playlist and then open in excel, do whatever sorting I want, I then save the file and reimport into itunes but not all the songs are there. It appears to be from "comma's" in the song name. Any solutions?

I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.

The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions?

Changing Domain Administrator Password : How can I find out what all servers / services are currently using this?

Good morning all,
I took over as IT director for the school district in my town about 2 years ago, and we've had some techs come and go, all of which have had the domain administrator password (not my call, but my fault for not changing it by now). I am about to change
it, but before doing so I want to know how I can make sure what all this will break so I can quickly change the cached/saved password on whatever supporting services use this user/pass.
Can anyone help here?
Thank you!

Hello,
In my point of view if I were in this situation I would Change the domain administrator password. By
Resetting the domain administrators all the services which use domain administrator as their logon user, will lose their functionality. I had this experience and I did change the domain administrator password with no problem. However do not
forget to have a account lockout tool or script for locating the place where the account was locked out.
But to keep it short most of the time. lockout problems are arise from mapped drives, credential manager and saved RDP sessions and etc.
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

DPM 2012 R2 catalog failing, not all database items are available for restore

I recently started protecting my SharePoint 2013 site using DPM 2012 R2. I was able to get item level recovery working, but not all of the database items are showing in the recovery section. I go get the warning "DPM failed to gather item
level catalog for 1 database(s) of the SharePoint Farm Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. (ID 3133)"
I have looked on the SharePoint front end web server in the WssCmdletsWrapperCurr log file and I do not see any exception there.
It it is strange because I do get the option to restore some items, just not all of them. Any help would be greatly appreciated.

Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Not all EPMA Services are Starting 11.1.2

Similar Messages

Maybe you are looking for