Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Similar Messages

Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

BTT... Need some help on the above

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Not all songs are getting synced into my iPhone

Why is this? I have no clue. Only ~200 of my ~500 songs are getting uploaded.
Also, what's the best way to store songs in my computer, such that it will not get duplicated on my iTunes and/or iPhone?
Currently, I store the song as "Led Zeppelin - Stairway to Heaven" on my computer.

Are you manually managing music and videos, or syncing?
If syncing, do you have all songs and playlists or selected playlists selected under the Music tab for your iPhone sync preferences?
Under the Summary tab for your iPhone sync preferences, do you have Sync only checked songs and videos selected?
If so, are all songs selected or checked in your iTunes music library?
Also, what's the best way to store songs in my computer, such that it will not get duplicated on my iTunes and/or iPhone?
When importing songs from another source besides the iTunes Store or when imported from a music CD, there is an iTunes option to copy files to iTunes Music Folder when adding to library, which is available at iTunes preferences under the Advanced tab below General.

Not all Pictures are getting sync

I have the New iPad and Windows 7 with the latest version of iTunes. I have a folders with many pictures in them. I am trying to sync these pictures to the iPAd. I select the folders I want and the picture start to sync but not all the picture copy over to the ipad I have cleared the itune photo cash folder. Please help I bought this so I could copy my pictures to it and it is not working right. Please help.

It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Save a calendar list as a template without data - not all views are getting saved

I have read plenty of articles showing how to save a list as a template and create a new list from that template. I have a very large calendar list that I want to save as a template. I do not need that data as it is last years. All I want to do is save it
as a template and create a new list for 2014 using that template.
Following the process, everything worked fine, but the template that got saved did not save all of the views. I have searched all over for a solution, but no luck. This calendar list has every user as a view, so there are a lot of views created.
Is there a limit for the number of views in a list that would be saved? How do i create a new calendar with the same views. I do not need that old data.
Bruno

SAP support was able to help => Solution is SAP note 1237688.

All fields are getting displayed in the output (ALV)

Hi i have declared an Internal table as folllows -
DATA: BEGIN OF itab1 OCCURS 0,
vbeln type vbeln,
bstnk like vbak-bstnk,
erdat like vbak-erdat,
kunnr like vbak-kunnr,
char type c ,
END OF itab1.
and reading data from table VBAK and filling the internal table..
but when i m displaying data i give the internal table name in the 'reuse grid' function' and structure name 'VBAK'..
in the ouput it is showing all the fileds of VBAK,,wht to do?

hi,
Make sure you have passed the reference table also as itab1 and NOT vbak.
Also U need to pass the Field Catalog filled in. IT_FIELDCAT parameter.
In FM REUSE_ALV_FIELDCATALOG_MERGE ->
the parameter I_INTERNAL_TABNAME should be set to itab1 and NOT vbak.
Regards,
Vivek.
**->Reward points if helps.

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Some fields are getting hidden in contract..

Hi All,
I have a problem while creating contract in ME31K.
Start of Validity period validity period end fields are getting hidden in ME31k.
Field selection group for the contract document type is WKK and these fields in this group are 'required entries'.
I don't understand how come these fields are disapearing in contract..
Can anybody please figure out the problem...
Thanks in advance
Raju

Hi,
In ME31K, these date fields will be usually not showed on the initial screen. While creating contract, after entering vendor, agreement type, agreement date, organizational data, we will be taken to the next screen where in we need to fill validity start date and end date.
In ME33K we can see this information under Header - > Details menu path.
If these dates are not available in the details tab, you might need to create a transaction variant from "SHD0" transaction. Please check under details tab and if not available create try to create a transaction varaint.
Hope this helps you !!!
Regards,
Ganga

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

In material master not all fields show the description of their value

Gurus -
Certain fields in the material master show their description text along.
Example -
Base Unit of Measure - EA      each
The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
Not all fields in material master show the description of what they represent. (only appear on F4 popup)
I want this description to come up for MARA-MAGRV field.
I want the configured value description for this field to appear on the screen.
I have 3 values put in this MARA-MAGRV
Z001 - description text 1
Z002 - description text 2
Z003 - description text 3
in MM01/MM02/MM03 only Z001 is see, not it description.
Here is what i tried
Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
any config missing?? what say?
Advises appreciated!
Thanks

You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
if did not find one than you have create custom (take ABAPer help)
go to SE11 adn enter the domain MAGRV and hit display
on the definition tab you will see the conversion routine
here you need to populate the appo. conversion routine to see the text on the materia screen.
Conversion takes place when converting the contents of a screen field
from display format to SAP-internal format and vice versa and when
outputting with the ABAP statement WRITE, depending on the data type of
the field.
If standard conversion is not suitable, it can be overridden by
specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored
as a group of two function modules. The function modules have a fixed
naming convention. The following function modules are assigned to
conversion routine xxxxx:
o CONVERSION_EXIT_xxxxx_INPUT
o CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal
format. The OUTPUT module performs the conversion from internal format to
display format.
If a screen field refers to a domain with a conversion routine, this
conversion routine is executed automatically each time an entry is made
in this screen field or when values are displayed with this screen field.

Not all fields are getting updated in transformation

Similar Messages

Maybe you are looking for