Not all fields in my adress book cards are available in the list to create an intelligent group.

How come,  and how do I add the missing field to that defiling list?
Thanks for any insight
Jef

Thanks Eric
Unfortunately (debatable...) I am still running Snow Leopard. The field is already added but does not appear in the pop-up list which defines the first of the three elements forming a selection condition in an intelligent group.
Q: Is that pop-up list limited to certain fields?
The disappearing field is called "profession" in my Address Book. Poptentially useful to sort professional contacts...
Q: Does it normally exist or was it added in some obscure way (which I am unable to reproduce now) ?
Hopeful yet
Jef

Similar Messages

  • I want to share some photos via email to multiple but not all addresses in my address book

    I want to share some photos from iphoto via email to multiple but not all addresses in my address book but when I try and add a recpient in the To field it will only allow me add one. I have to send the email to juts one person and then when it is sent the template with my photos and messages disappears and I have to start all over again! Surely there is an easier way - please help! Thanks

    IMHO the best solution is to use apple mail - set it in your iPhoto preferences
    LN

  • Loop at screen - not all fields are available

    Hi all,
    I want to set some fields on the screen invisible.
    When I do the loop at screen in PBO not all fields from the screen are available.
    Just four fields are available. In the screen there are about 20 fields.
    I try to use the chain. field xyz. endchain... But it was not the problem.
    Any ideas?
    regards

    Try this ,May be  Help ful
    { SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_cars.
    PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_toyota .
    PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_ford .
    PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_bus .
    PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_volvo .
    PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_merced .
    PARAMETERS : r_merced RADIOBUTTON GROUP rgb2  DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    AT SELECTION-SCREEN OUTPUT.  " AT SELECTION-SCREEN OUTPUT
      IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
        LOOP AT SCREEN .                       " Looping at screen
          IF screen-name CS 'R_VOLVO' OR
             screen-name CS 'R_MERCED'.
            screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN .
          IF screen-name CS 'R_TOYOTA' OR
             screen-name CS 'R_FORD'.
            screen-active = 0.
          ENDIF.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF. }

  • Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

    For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
    For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
    In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
    I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered.  I.e. the fields are not getting cleared at any point.
    Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

    BTT... Need some help on the above

  • Is there a way to specify which fields are displayed in the "new contact" window in the adress book, or at least highlight the ones that are important to me?

    It would be nice if I could put together the fields in the "new contact" window in the adress book, or at least highlight the ones I need with bold letters or a different color. Is there a way? Thank you.

    No method I am aware of.
    This add-on adds many features, but I don't know if what you seek is included.
    https://freeshell.de//~kaosmos/morecols-en.html
    How to install
    http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • In material master not all fields show the description of their value

    Gurus -
    Certain fields in the material master show their description text along.
    Example -
    Base Unit of Measure  - EA      each
    The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
    Not all fields in material master show the description of what they represent. (only appear on F4 popup)
    I want this description to come up for MARA-MAGRV field.
    I want the configured value description for this field to appear on the screen.
    I have 3 values put in this MARA-MAGRV
    Z001 - description text 1
    Z002 - description text 2
    Z003 - description text 3
    in MM01/MM02/MM03 only Z001 is see, not it description.
    Here is what i tried
    Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
    any config missing?? what say?
    Advises appreciated!
    Thanks

    You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
    if did not find one than you have create custom (take ABAPer help)
    go to SE11 adn enter the domain MAGRV and hit display
    on the definition tab you will see the conversion routine
    here you need to populate the appo. conversion routine to see the text on the materia screen.
    Conversion takes place when converting the contents of a screen field   
    from display format to SAP-internal format and vice versa and when      
    outputting with the ABAP statement WRITE, depending on the data type of 
    the field.                                                                               
    If standard conversion is not suitable, it can be overridden by         
    specifying a conversion routine in the underlying domain.                                                                               
    A conversion routine is identified by its five-place name and is stored 
    as a group of two function modules. The function modules have a fixed   
    naming convention. The following function modules are assigned to       
    conversion routine xxxxx:                                               
    o  CONVERSION_EXIT_xxxxx_INPUT                                          
    o  CONVERSION_EXIT_xxxxx_OUTPUT                                                                               
    The INPUT module performs the conversion from display format to internal
    format. The OUTPUT module performs the conversion from internal format to
    display format.                                                                               
    If a screen field refers to a domain with a conversion routine, this    
    conversion routine is executed automatically each time an entry is made 
    in this screen field or when values are displayed with this screen field.

  • In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's.

    In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's on several of the preferences pages.  The Apple people at the store did not help.  I have lownloaded the latest version of iTunes and this is still an issue.  HELP.

    Is there really nobody else with this problem? Really?

  • HT4859 My phone some how deleted not all but most of my contacts and then backup to the iCloud can I go back to a previous backup and retrieve the contacts. If so how.

    My phone some how deleted not all but most of my contacts and then backup to the iCloud can I go back to a previous backup and retrieve the contacts. If so how.

    Hi Shero89,
    Thanks for the answer.  I am not new to IOS software but I don't really ever bother with it, have discovered how little I take advantage of the i-phones capability, in reality I still only really use it to phone, text, check emails, listen to music and look on internet.  I'm not keen on jailbreaking it as I don't trust it to work so normally just update and leave it at that.  Only reason I wanted to downgrade was because the update had stopped my bluetooth working but Kilted Tim solved that problem for me so am now not interested in downgrading software.  I quite liked the things that IOS 5.1 gave me but wasn't happy with fact that bluetooth stopped working in car as it caused me problems.  One day I might try and work out exactly what I-phones can do but on the basis that it's a phone all I really want it to do is phone, if that bit works I'm happy.

  • HT201317 Not all of my photos on my iphone are showing up on the stream on my computer.  How do I get all the photos from my iphone onto my photo stream on my PC?

    Not all of my photos on my iphone are showing up on the stream on my computer.  How do I get all the photos from my iphone onto my photo stream on my PC?

    Use a third-party utility such as Phone to Mac - Pod to Mac.

  • No data fields are available in the OLAP cube

    i was able to access data in Excel yesterday, but now all the cubes that i have created cannot be accessed by Excel any more and after authenticating and selecting the cell for the pivot table i get this error:
    No data fields are available in the OLAP cube
    i just hope this is some process in HANA that needs restarting and not some endemic MDX problem. if so, where do i look?
    has anyone seen this?
    BTW, shouldn't there be a single log on for the connection? i have to enter credentials twice: 1 when creating the connection and 2 when opening the pivot table.

    something/someone has locked my userid when i was recreating the steps in Excel (i don't think i have tried 'wrong' passwords, but i did try a ['wrong' user|http://misiorek.com/h/GMSnap206%202011-11-27.jpg]
    Here are the steps:
    1. Open [Excel|http://misiorek.com/h/GMSnap202%202011-11-27.jpg].
    2. Enter [connections|http://misiorek.com/h/GMSnap203%202011-11-27.jpg].
    3. Select [HANA cube|http://misiorek.com/h/GMSnap204%202011-11-27.jpg].
    4. Select [Pivot cell|http://misiorek.com/h/GMSnap205%202011-11-27.jpg].
    5. Enter credentials (see above).
    I'm also not sure why I see these security messages:
    [locked|http://misiorek.com/h/GMSnap207%202011-11-27.jpg], Microsoft [warning|http://misiorek.com/h/GMSnap208%202011-11-27.jpg], HANA [warning|http://misiorek.com/h/GMSnap209%202011-11-27.jpg], HANA db [warning|http://misiorek.com/h/GMSnap210%202011-11-27.jpg]

  • Recent changes (v 31) have made a mess of the address box and addressing; address book entries are incorrectly entered and lists don't work.

    Not really a question. I've gone back to an earlier version of T-Bird because the address block format and addressing function in V31 is a total mess. When calling addresses from the address book, they are incorrectly entered. Lists simply don't work at all. V24 was pretty good so I've turned off auto updates.

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

  • Required field, UPC, is missing. Please add UPC to the listing and retry the operation.

    What to do about this: "Required field, UPC, is missing. Please add UPC to the listing and retry the operation." ? We sell cassette tapes and sometimes they are are of a vintage that predates upc codes.

     forester_studios wrote:OK thanks for the input; but selecting 1 item leaves the other 4 or 5 unsearchable I would think.  Seems like a typical ebay answer (which is not much better than no answer as far as problem solving goes).   I have to wonder if ebay thought this new requirement through.  Often upc codes on Canadian items are not in ebays system at all.  So are these items which have upc codes un-listable  since ebay does not acknowledge they exsist? In that case, here is what I intend to do.... List the most important item's UPC in the actual required UPC field and then create as many other 'custom' item specific UPC fields as are allowed. You need to be on the long form selling form to do it. Call them Other UPC and Even More UPC or something. And then, just to be sure, I'll list all the UPCs in the item description.  Buyers probably won't search for UPC (unless they're standing in a retail store with their smartphone in hand and looking for cheaper pricing online) but search engines do. When I look for the products that I sell on google, I get amazon results 19 times before I see one from eBay. I'm certain that's the UPC talking there. We do need Product Identifiers on eBay. Implementing them is the difficulty. Ebay is aware that the UPC for Canadian packages may be different than the exact same in an American one. I've raised it and was told they were looking into it. Use the MPN identifiers too. Pretty much nothing I list can be found in the product catalogue on ebay.ca (is there one?) so I don't know what to expect for resolution there if and when the Catalogue version of the Product Identifiers are shown to be clearly wrong but I know it happens, here and elsewhere. The last order that I placed with Amazon had a new UPC pasted over an old, similar product. It was not what I ordered. Close but no cigar. Hopefully, when all of this becomes 'official' in two weeks, there will be a timely manner to address item misinformation within the Product Catalogue. In the meantime, I would state all the item properties in the Item Description area to cover my butt.   

  • Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

    Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
    4 WFE's
    4 App Servers (NLB Central Admin x 4 servers)
    4 App Severs for SSRS (Light limited SharePoint services running)
    I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
    All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
    I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
    Reporting Services.
    I have ran the following commands in the SHarePoint management shell:
    Install-SPRSService and Install-SPRSSeviceProxy
    and
    get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
    The reply was that the service was already online on the server.
    So in powershell all seems ok but it does not appear in central administration.
    I have also moved Central Administration to the SSRS SharePoint server too.
    Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
    In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
    I guess my next attempt is to install SSRS on an app server with central administration hosted.
    Thanks

    I had the same issue on 2 different environments.
    I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
    When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
    Since then I always install SSRS on the server which hosts Central Admin. No issues then.

  • USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

    USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

    Greetings;
    This seems to an ongoing issue (see related discussion link).  We've been experiencing the same update lag since last Friday.  The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself.  Apple is aware of the issue and is investigating.  All the best...
    Syd Rodocker
    Tennessee State Department of Education
    https://discussions.apple.com/message/15461971#15461971

  • AET Issue-Zfields are not available in the list of Reusable ZFields List

    Hi Experts
    I created and added Z fields using AET for Incident (SRQM_INCIDENT_H/IncidentHeaderEF VIEW).
    Same Z fields I want use in Incident_SLA (SRQM_SLAPRO\ SLASRVCTRVIEW), I make utilize of Add Reusable Field button to choose the existing Zfields. But Zfields are not available in the list of existing ZFields  for SRQM_SLAPRO\ SLASRVCTRVIEW.
    Please help me in this scenario.
    Thanks
    Chand

    This is almost same issue which makes me to reply here..
    In Extension Object MKTPL_MPL, MKTPL_MPT I could reuse the fields which were defined in MKTPL_CPT.
    And in Extension Object MKTPL_CPG, I could also reuse "some" fileds in MKTPL_CPT.
    But some of fileds of MKTPL_CPT which were already reused in MKTPL_MPL, MKTPL_MPT were not displayed in the reusable fields list for MKTPL_CPG.
    In AXTREG, The BOP and Extention location is same like below.
    Can you please explain to me why I cannot see the fields in the list? or, what should I check in the system?
    [in AXTREG]
    BO : MKTPL_CPT
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_CPG
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    Many thanks and regards,
    Soyeon

Maybe you are looking for