Not all fields (self-created) of addresbook are synced

I have the following problem: I have an iPad and an iPod touch, both with the latest version of iOS. I also have a Mac with 10.5.8.
In adressbook I have added my own fields. Say I have the following extra fields: Child/Child/partner/e-mail1/e-mail2. The problem is that those fields are not synced to either iPad nor iPod touch. These new fields will not appear on my mobile after a sync.
This ***** because I spend conciderable time in creating and filling these fields with information.
This has nothing to do with mobile.me. iSync, etc. It's plain syncing OSX addresbook and iPad/iPod touch through iTunes.

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Similar Messages

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

BTT... Need some help on the above

In material master not all fields show the description of their value

Gurus -
Certain fields in the material master show their description text along.
Example -
Base Unit of Measure - EA      each
The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
Not all fields in material master show the description of what they represent. (only appear on F4 popup)
I want this description to come up for MARA-MAGRV field.
I want the configured value description for this field to appear on the screen.
I have 3 values put in this MARA-MAGRV
Z001 - description text 1
Z002 - description text 2
Z003 - description text 3
in MM01/MM02/MM03 only Z001 is see, not it description.
Here is what i tried
Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
any config missing?? what say?
Advises appreciated!
Thanks

You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
if did not find one than you have create custom (take ABAPer help)
go to SE11 adn enter the domain MAGRV and hit display
on the definition tab you will see the conversion routine
here you need to populate the appo. conversion routine to see the text on the materia screen.
Conversion takes place when converting the contents of a screen field
from display format to SAP-internal format and vice versa and when
outputting with the ABAP statement WRITE, depending on the data type of
the field.
If standard conversion is not suitable, it can be overridden by
specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored
as a group of two function modules. The function modules have a fixed
naming convention. The following function modules are assigned to
conversion routine xxxxx:
o CONVERSION_EXIT_xxxxx_INPUT
o CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal
format. The OUTPUT module performs the conversion from internal format to
display format.
If a screen field refers to a domain with a conversion routine, this
conversion routine is executed automatically each time an entry is made
in this screen field or when values are displayed with this screen field.

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients".

I have a few collections, but not all PC's in those collections are listed in "All Desktop and Server Clients". Does anyone happen to know the reason for this? It should have at least the same number of clients as the largest collection.
Thanks,
James
James A+, Network+, MCP

Hi James,
The All Desktops and Server collection only contains devices that show client=yes.
Meaning the Configuration Manager client is installed on those devices.
This WQL query will give you a collection of all devices that do not have the client installed.
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where (SMS_R_System.Client is null or SMS_R_System.Client = 0) and SMS_R_System.Name != 'Unknown'
Another handy collection is all clients that are inactive (No communication for the default 7+ days)
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_CH_ClientSummary on SMS_G_System_CH_ClientSummary.ResourceId = SMS_R_System.ResourceId where SMS_G_System_CH_ClientSummary.ClientActiveStatus = 0
I normally create both and then a third collection of all devices and exclude the above two which should show you all healthy devices.
Have a look at the ccmsetup.log file on the client if it has attempted to install the ConfigMgr client but failed.

Not all of my perviously purchaced songs are showing up on itunes purchaced link on my account. It show that I have already purchaced them in the itune store, but i have no way of downloading them back into my library.

Not all of my perviously purchaced songs are showing up on itunes purchaced link on my account. It show that I have already purchaced them in the itune store, but i have no way of downloading them back into my library.

If they aren't showing in the Purchased tab in the iTunes store app (and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes) for redownloading then have you checked to see if they are hidden : http://support.apple.com/kb/HT4919 ?

Not all of my songs from itunes are appearing in garageband.

Not all of my songs from itunes are appearing in garageband. I want to make a ringtone with a certain song but its not there. How do I get it to be there?

Is it a song you have purchased? Maybe your song is protected by digital right management? Then it will not show up in GarageBand. Have a look in the Information panel if the kind of the song is "Protected".

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

While you're correct in that Windows media won't sync to the iPhone (or any i-device), the OP states that all the music is in iTunes. If its in iTunes, it would no longer be in Windows media format since it would have been transcoded to whatever the user sets as their import preference (AAC, mp3, etc.), and once that is done then the media should be able to sync to the iPhone just fine.
To Steph, do the missing songs play OK in iTunes? If not then they could be corrupted in some way. If they play fine in iTunes but don't sync, are they unchecked in iTunes? They won't sync to your iPhone if it is set to ignore unchecked items. Finally, if these are iTunes purchases, are they protected format? (i.e. m4p files) If so, is your computer authorized to play them? (you'd know if you try to play them in iTunes, it would prompt you for the account password if not authorized)

Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Not all fields in Address Book are syncing

For some reason not all the fields in my address book get synced from one computer to another. The template for all the fields in address book are the same on the different computers but the 'Department' field does not get synced. Any ideas how to fix this?

So sorry...yes I'm using Contacts from Outlook.
When I launch Field Mapping from the Advanced Settings for Address Book, the Handheld fields that are available for me to map to my Contacts in Outlook, do not include the fields previously mentioned so there is no way for me to map them to a destination field in Outlook.
Maybe I'm using an old version of Desktop Manager??? Mine is version 3.6.0.63 (June 11 2003)...could you please let me know what version you have?
Many thanks!

Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

Dear All,
When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
The fields are:
1. WBS Element Description, technical name: PRPS-POST1
2. Person responsible number, technical name: PRPS-VERNR
Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
The client do not want to set LOCK system status for master data option.
Is there any enhancement or standard way of doing that?
Regards
Saqib Usman

Dear Saqib,
Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
Also go thru the below link for clarification of WBSE system status:
http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
For locking all master data, as above experts suggest, you should use MDLK/LKD.
Regards
Shishir

Not all fields show up on fields to be changed

Why some fields that are selected in the planning level don´t show up in the tab fields to be changed? I have around 20 fields selected and only 10 are showing up....
Is it because of the selection I´ve done in the planning package?
Thanks
Cris.

 

Hi
 
If you have already selected some fields as Fields for Conditions then those fields won't appear in Fields to be Changes List.
 
 
I hope you are aware of this.
 
 
 
Cheers
Abhijit

Not all fields in my adress book cards are available in the list to create an intelligent group.

How come, and how do I add the missing field to that defiling list?
Thanks for any insight
Jef

Thanks Eric
Unfortunately (debatable...) I am still running Snow Leopard. The field is already added but does not appear in the pop-up list which defines the first of the three elements forming a selection condition in an intelligent group.
Q: Is that pop-up list limited to certain fields?
The disappearing field is called "profession" in my Address Book. Poptentially useful to sort professional contacts...
Q: Does it normally exist or was it added in some obscure way (which I am unable to reproduce now) ?
Hopeful yet
Jef

Not all fields (self-created) of addresbook are synced

Similar Messages

Maybe you are looking for