Not all images uploading from camera..

When I upload images from my camera it will load some of them and then it acts like upload is complete.   I have to hit upload several times to get a session uploaded that was shot all at the same time, anyone know what may cause this ?  I didnt realize it did this and it just cost me a session that I have to reshoot now bc I thought all the images were uploaded but they werent.

Hi Michael sorry for your troubles - a really irritating issue to have!
This is usually a hardware issue.
You don't mention how you are downloading images.
In general most folks would strongly recommend not downloading straight from the camera because of the number of issues that occur.
If you are using a card-reader then it is likely that it is still a hardware issue.
It may be the card reader, the USB cable, or the USB controller (rarer but still possible).
If there is more to this let us know!
Tony Jay

Similar Messages

  • Not all images appear in browser?

    Could someone tell me why this page shows some images but not all images? http://www.phyllisconnellphotography.com/MX_Supercross_2.html

    Remove the special characters from your images. For example, the # in the image below...
    mages/MX_Supercross-119-3_#409.jpg
    For the names of images and pages, you should never use special characters like # or & (even spaces should be - or _ instead). Those items have special meanings in html and javascript and can cause problems. Luckily, you can kill two birds with one stone. Go into your images folder from within the DW Files tab and rename them there. That will then automatically update all of your links to the images. Reupload and you should be good to go.
    On a side note, I notice a mailto: link with an email address in your source code. That's a very good way to get an email address harvested by a spam bot. You may want to look into a form to email script like formmail from http://www.tectite.com which will allow you to hide that address from spammers.

  • How to get all image files from a folder to wwv_flow_files?

    Hi there!
    Is it possible in apex to show, in a report look-a-like, all image filenames from a folder in another machine (i enter in that machine by ip) and insert all files into wwv_flow_files?
    I want to see all files, then pick one and open a image...
    But it can't be by browse item... it has to show all filenames as a list...
    If it is possible, how can i do it?
    Thanks!
    Best regards,
    Luis Pires

    Hi,
    you can connect to the server using UTL_HTTP.
    Then for each files you copy the response into a BLOB to be able to show it or to store it in a table.
    A piece of code :
    begin
       -- initialize the BLOB.
       dbms_lob.createtemporary(l_blob, false);
       -- path to the file
       l_url := 'http://your_server/your_file.jpg';
       -- begin retrieving the target.
       l_req := utl_http.begin_request(l_url);
       -- identify ourselves (some sites serve special pages for particular browsers)
       utl_http.set_header(l_req, 'User-Agent', 'Mozilla/4.0');
       -- start receiving the response.
       l_resp := utl_http.get_response(l_req);
       -- copy the response into the BLOB.
       begin
          loop
             utl_http.read_raw(l_resp, l_raw, 32767);
             dbms_lob.writeappend (l_blob, utl_raw.length(l_raw), l_raw);
          end loop;
          -- stop when exception end_of_body is raised
       exception
          when utl_http.end_of_body then
             utl_http.end_response(l_resp);
       end;
    end;It's a minimal example, you may need authentication, check l_resp.status_code, etc...

  • Not all songs transfering from iTunes to iPod...

    could someone please help me out!?!? not all my songs from my playlist on itunes is transfering to my ipod...any suggestions on why?? im kinda new to this thing...
    and also... when i plug my ipod up and it says on the bottom how much space you have left on it...it says i have some of it used, and there wasn't even anything on my ipod yet...
    thanks for your help!!!

    See here for information about transferring songs, and follow these instructions.
    (23164)

  • ERR "Could not load "image-loading" from icon theme"

    Just finished installing OpenBox on a virtualbox
    But cannot get nitrogen to set background.
    while running nitrogen from command line
    [utkarsh@myhost ~] $ nitrogen
    ERR: Could not load "image-loading" from icon theme, this indicates a problem with your Gtk/Gtkmm install

    I too had to the same problem. Couldn't find why we get that error. But could set the wallpaper using the command line.

  • Which canon printer should I purchase to print wifi from my ipads/iphones, etc? I have heard not all printers print from iphones?

    Which canon printer should I purchase to print wifi from my ipads/iphones, etc? I have heard not all printers print from iphones?

    See http://support.apple.com/kb/ht4356 for the list of AirPrint printers.

  • HT5395 when i downloaded messages, not all my texts from my ipod (IOS 6) showed up. can i text my friends from my mac to thier phones?

    when i downloaded messages, not all my texts from my ipod (IOS 6) showed up. can i text my friends from my mac to thier phones?

    Hi,
    There was a Messages beta for Lion but basically the app Messages comes with Mountain Lion.
    You are asked for an Apple ID as the first step.
    If you add this Apple ID to your iPhone the Apple ID and iPhone number become linked and iMessages sent to either will be "Received at " on both.
    However this "Syncing" as Apple calls it only starts from the day/Time they are linked.
    Open chats that exist on the iPhone are not transferred to other devices.
    In fact the "sync" is Display on all devices and nothing more.
    Any action on the iPhone to an iMessages does not happen to those showing on your Mac version (or an iPad)
    9:22 pm      Thursday; January 23, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • When I sync with my iPad2, not all playlists come from my computer to the ipad - why?

    When I sync with my iPad2, not all playlists come from my computer to the ipad - why?

    Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over correctly - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • IPhoto 8.1.2 mpeg video not uploading from cameras or iphones. Using Mac OS X 10.6.4

    iPhoto 8.1.2, using Mac OS X 10.6.4, not uploading or recognizing mpeg(mpg) videos from camer or iPhone. Please help.

    Try iMovie and/or Image Capture (in your applications folder)
    LN

  • Pictures not always uploaded from Camera Roll to Photo Stream

    Hi all,
    I am experiencing a "not so constant" behavior of Photo Stream.
    I noticed that sometimes not all the photos taken with the IPhone are uploaded to Photo Stream. Given that this upload may be poosible only if the iPhone is connected to a Wi-Fi network, is there a way to force the synch between Camera Roll and Photo Stream?
    Thanks.

    Well, last night I tried to:
    disable Photo Stream in iCloud settings on the iPhone
    "delete" the whole iCoud account on the iPhone and then log in again
    reset Photo Stream in the advanced options of my account on icloud.com
    This caused all the pictures of the iPhone Photo Stream gallery and on iCloud.com to be deleted, so I restarted from a clean condition. Then I took three photos, but only the second and the third were uploaded to Photo Stream on iCloud, to the Photo Stream gallery of the iPhone and subsequently downloaded to the Photo Stream folder of my PC.
    Still puzzled...

  • Recently installed Icloud onto my pc, but for some reason not all my photos from photostream uploaded. What to do?

    Hi I had just installed icloud to my comptuer but not all my photostream photos had uploaded to the folder on the pc. I have over 300 photos but only about 100 had uploaded. I have tried a few things but nothing seemed to work. If anyone has any ideas on how to fix this problem it would be greatly apprciated. Thank you.

    Hello lostintime2,
    Thanks for the question, and welcome to Apple Support Communities.
    The following resource provides the most relevant information to your question:
    iCloud: Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Thanks,
    Matt M.

  • How can you select which pictures to upload from camera? plus facebook ?

    Is there any way to select which pictures from your digital camera you would like to upload on to iphoto? Or is the only way to upload all of the pictures on your camera? I have 214 pictures on my camera and 210 of them are already in iphoto...i only want to upload the new 4!
    Another question..
    I am trying to upload my pictures on to Facebook, and they are significantly smaller than the pictures I uploaded via my PC. How can I get them to upload at normal size?
    THANKS!

    Re: the FaceBook problem
    This sounds like you're uploading the Thumbnails that iPhoto uses to display the pics in the iPhoto Window not the pics themselves. Have you been uploading from the Data folder in the iPhoto Library Folder?
    There are three ways (at least) to get files from the iPhoto Window.
    1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size.
    3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Photo size when uploaded from camera

    I have been trying to order prints off of snapfish, and keep getting the resolution warning on every single picture. I have a Canon Powershot camera and have adjusted it so that it is on the highest resolution, so I think the problem comes from uploading to iPhoto. According to snapfish, 4x6 photos need to be 540x360 pixels and all of my pictures seem to be 270x360 pixels. Can I fix this?

    1. Where are you getting these measurements from? These 270 x 360 sound like the thumnails that iPhoto creates for display in the iPhoto Window.
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Firefox is failing to display many (but not all) images on websites that I visit, some images are shown and some are not even if they are in the same format.

    I recently changed my ISP because I was having connectivity issues. In particular my router would shut down sporadically. As part of my attempt to clear issues I ran some spyware software which I've been told I could trust. Since then I have a problem viewing many websites as many (but not all) of the images are missing, even on websites that I know very well, including my own. What is very strange is that on one site every page has a jpg image under the navigation bar and all of these jpg's appear except one which doesn't appear even when I reload images. This problem also makes security sensitive sites like my bank site look very amateur which frightens me. The problem does not occur on other web browsers.

    Which ''spyware software'' software did you run?
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • PRINTS RECEIVED DO NOT MATCH IMAGE SUPPLIED FROM MY IPHOTO LIBRARY; CAN'T LOCATE ACTUAL MEANS TO RETURN AND GET ACCURATE PRINTS

    PRINTS DO NOT MATCH IMAGE FROM MY IPHOTO LIBRARY

    Please fix your Cap lock key - posting in all caps is =very hard to read - and is considered yelling and rude
    and pleas describe what your need - prints received form where? what version of iPhoto? If this has to do with Apple print services use the link in the confirmation email to contact Apple about yr. question
    LN

Maybe you are looking for

  • How to bind "Image Field" object on a database

    Hi to all I inserted into a dynamic PDF (Livecycle ES3 trial) an image field, but I don't understand how I can to bind a JPG into a database. In (F5) preview... I'm able to open a image file on filesystem and visualize it on PDF form... but then? How

  • 6500 Slide new firmware 9.60

    It seems there's new software out today, version 9.60 for the 6500 slide. I'm currently on v8.30. Has anyone updated and can tell me of any new features, bugs, etc? My last post on this got deleted for some reason - mods, do not delete without tellin

  • Error while starting Content server

    Hi, I am trying to start the content server, but the is a error while starting up. Following is the error dc2serv:sqddq1 4> /sapdb/programs/bin/dbmcli -n dc2serv -d DQ1 -u control,bridg012 db_stop Must be called by root or effective user 209 effectiv

  • XPATH readout - HAshmap/Array or Enum

    Hi, I am reading this from my xml file: <Taxes>                   <Tax TaxCode="code1" Amount="500.00"/>                   <Tax TaxCode="code2" Amount="100.00"/>                   <Tax TaxCode="code3" Amount="100.00"/>                   <Tax TaxCode=

  • Anjuta fails to build project.

    So I have a "full GNOME3 desktop" installed with Anjuta, but when I try to build a new project, the assitant skips though a few panes and says the "project has successfully been built". But, nothing happens ... Is there a package i'm missing or somet