Not all loops appear in loop browser... even after I reindex. Please help.

I've just spent the past couple of hours trying to reindex my loops so that they all show in the browser... to no avail. Which is to say, they will show, if you know how to find them. Let me explain:
I have Jam Pack Promos 2, 3, and 4. These loops begin with following prefixes respectively: "2- ", "3- ", and "SO".
If I select "Show All" in the Loops Browser, it does not show any of the loops that I have mentioned. However, if I search in the keyword search bar with any of the prefixes, it will show me these loops.
Now, I have already turned OFF the keyword browsing option in preferences. I've reindexed innumerable times. I don't know what else to do.
If anyone can help, I would appreciate it.
Finally, thank you, Apple, for a great (and affordable) product. Just one request for the next time around: please locate the loops in one directory on my hard drive... and not four!

http://discussions.apple.com/thread.jspa?threadID=787415
I experienced this same issue trying to help another user. I had never launched GarageBand on my new MacBook Pro which came with it preloaded. I used the "delete the indexes and re-add them" method but at first glance it appears nothing is there. I misunderstood the GarageBand interface because I selected show all from the loop choices yet nothing appeared. It turns out the buttons with loops became available but still none were selected. By selecting a button like "All Drums" or "Rock/Blues" I could then see all the loops in those genres. By clicking the view selector at the lower left and changing to column view it gave another way to find them by Finder structure too. Hope that helps!

Similar Messages

Using ios8.1 on iphone 6. icloud is enabled. when I add a contact on the phone it does not appear in icloud contacts even after backup. Pl help

using ios 8.1 on iphone 6. when I add a contact on the phone it does not appear in icloud contacts even after backup. pl resolve

Hello feroziem,
The article linked below can help get iCloud and your iPhone to synchronize your contacts.
Get help using iCloud Contacts
http://support.apple.com/en-us/TS3998
Cheers,
Allen

HT5622 "your apple id has been disabled". Will not clear even after resetting. Please help!

Unable to clear message even after resetting.

Contact iTune Support if you still have problem.
https://ssl.apple.com/emea/support/itunes/contact.html

My ipod keyboard wont work even after restoring it please help

please help me!!

If you did not restore to factory defaults/new iPod do that. If yuo are still having problem then an appointment at the Genius Bar of an Apple store is in order. You likely have a hardware problem.
You are not addressing Apple here. We are just users like yourself.

Firefox will not open on my computer, even after reinstall. Please help?

I've been using Firefox for a long time and it's been working well. I'm on acer Windows 7. However now it will not open even when I try to run "C:\Program Files\Mozilla Firefox\firefox.exe". Chrome or Internet Explorer work fine. I also reinstalled Firefox and it still doesn't work.
Here's the id of my latest crash (from 30.4.2014): bp-4e981129-aea6-4b23-87a2-739b42140430
Thank you for any help with fixing this.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

On a Contacts search, not all contacts appear

Hi
I have iphone 5, ios7.
Seemms very odd recently, not using groups - all contacts are displayed. But when I use the 'search' in the Contacts App, not all contacts appear. Dispite the fact that if I scroll through manually, I can see and access the very contact I was searching for. This applies to quite a few contacts without any apparent consistent link between the tricky ones.
Any ideas folks?
Many thanks

Thanks for the quick reply :)
The search doesn't work even if I put in a name exactly as its listed. It used to be for example if I typed 'A' then all the names starting with 'A' would list but now I get nothing.

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

Returns PO appearing in VL10B transaction even after delivery is created with full PO qty

Hi All,
Returns PO is appearing in VL10B transaction even after delivery is created with full PO qty /
Regards
ab

Hi Ayub,
Please go to the Return PO item details, and check the Delivery tab and make sure the delivery completed check box is selected. If not please select the check box and save the line items.
If there are multiple line items, then do the same for all the line items.
Then check in VL10B and confirm me.

HT201177 My new MacBook Retina cannot play any videos on any browser. This includes the Apple videos. It keeps saying Missing Plug-In. I am not sure what I am supposed to do. Can someone please help me out?

My new MacBook Retina cannot play any videos on any browser. This includes the Apple videos. It keeps saying Missing Plug-In. I am not sure what I am supposed to do. Can someone please help me out?

My iPod mini, 4gb is hard to get serviced obviously because they dont make them anymore
It is as simple to get it serviced as the day you purchased it.
How is it hard to get it serviced?
How long have you had your iPod?
i get maybe 4-5 hours of battery life, maybe even 6 if im lucky
That is not good but it's not "terrible".
If you've had it less than a year, send it back to Apple to replace the battery.
thought that i might buy an attachment type accesorie that i plug into the usb port on my ipod
It's called a dock connector, not a USB port.
i found a product in the online store, that i guess you place the ipod mini on, and it gives you up to 20 or so more hours of time but then it says that you have to have a firewire port or cable?
What is it? The firewire port is on the computer, not the iPod.
If the original battery is going bad, the first thing to do is get that sorted out.

Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am not able to zoom in and out even after activating in track pad

i am not able to zoom in and out even after activating in track pad

System Preferences > Trackpad > Zoom & Scroll
Uncheck and recheck all 4 features again.
System Preferences > Accessibility > Zoom
Enable and disable "Use scroll gestures with modifier keys"

Can't set Firefox as default browser even after following steps in Firefox support

Can't set Firefox as my default browser even after following the steps outlined in Firefox support. Operating Firefox on Snow Leopard with Windows 7 running under Parallels. Clicking on links in emails, etc. always opens IE 8 in Windows instead of Firefox on the Mac
== This happened ==
Every time Firefox opened
== About a week ago

I had the same problem, I just forgot how to fix it. I did it once a while ago but just recently the problem had returned. The first link in vineelreddyp's post solved the problem for me.
Just as an FYI for people, when OSX does software updates it includes Safari updates. When it completes a Safari update it resets all the Safari settings (they recently upgraded to Safari 5.0), including default browser.
So anyway, FYI about that. ;-)

TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 6 apps this is really bothering me please help I can't even take pictures because it says I've no storage

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have no messages at all

My iPhone is a 16GB and it says 9.0GB Available and 3.7GB used; I suspect the missing 2.3GB is occupied by the system software.

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Not all loops appear in loop browser... even after I reindex. Please help.

Similar Messages

Maybe you are looking for