Not all my messages are sinked when using IMAP and Gmail.

This happens on all computers I've tested. I've tested 2 windows 7 64 bits and one windows vista 32 bit.
I configure IMAP on my thunderbird client and most emails sink, but there is about a week or 2 that don't. This week or two is about 2 weeks before I sinked the new cliant to the server. For example, if I sinked today, august 27, emails between august 1 and 14 would not sink.
Emails from 2 years ago and yesterday will sink just fine, it is always about that 2 week past mark where they don't sink.
On one windows 7 that I sinked on august 14, the emails don't sink from July 15 to august 1 although they are there on the second computer.
The emails are in my Gmail, so I've just been going into the online client to read them, but why would this be happening?

You are low on memory. Look in Options >Status and post the number you see next to "File Free." Once you get that number, remove the battery and reinsert and post the number there after the reboot. Then read the thread below to fix the problem for good:
http://www.stinsonddog.com/optimize-your-bb-s-memory
Message Edited by John_Clark on 12-26-2008 04:20 PM
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Mail application - quits unexpectedly when using IMAP and gmail

when i use mail as a IMAP client i will get the dialog box about mail quits unexpectedly
this only happens with gmail - no issue when using mail with mobile.me
rob

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

How do I delete a message? Using Imap and gmail

I am using imap with gmail in apple mail for leopard. I get the idea that when you press the delete button it only deletes the inbox tag and it is still available for reference in "all mail" on the left window. I like this, it allows me to clear out my inbox and still reference e-mails later. Here is the question... How do I really delete a message, one I truly never care to see again? My "all mail" is getting out of control.

This is what I do:
In preferences, I set my Gmail account as recommended by Google: I UNcheck the "Move deleted messages to the Trash mailbox" option under Mailbox Behaviors. Once I do that, clicking "Delete" from the inbox actually archives it into the All Mail, but leaves it in my mailbox.
If there is an email I actually want to delete from my account, I move it from my Inbox to the Trash folder. I do this with a MailActOn keystroke, but you can do it just by moving it or dragging it there.
MailActOn helps a bunch if you have a lot of emails. I process about 300 a day and rely on it for maintaining my sanity, especially since I can set the same keystroke to do different things in different accounts, since I "delete" and "archive" differently for different accounts.

TS4268 my imessage was working fine on monday as of friday it stopped working and all my message are going to my ipad and not sure what to do i have tried the steps above

my imessage is not working all messages are being sent to ipad

Hello pinkyakabella,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Best of luck,
Mario

Not all archived messages are displayed

Have a strange situation with archived items for a user. I can only see archived messages in the inbox window up to a certain date but when I do a find based on a later date than what is showing, the messages are there. Total items in archive show as 65535. Is there a limit on how many archived messages are displayed?
Thanks

On 3/15/2011 4:06 PM, ssiegler wrote:
>
> Have a strange situation with archived items for a user. I can only see
> archived messages in the inbox window up to a certain date but when I do
> a find based on a later date than what is showing, the messages are
> there. Total items in archive show as 65535. Is there a limit on how
> many archived messages are displayed?
>
> Thanks
>
>
That's the limit.

I am transferring to the iPhone 5s from my 4s and I lost my activation guide so all my messages are sending from my email and not my number. How do i fix this?

Please help. I can not call anyone and i can not text anyone that does not have an iPhone and I really want to use my new phone so please help me.

Using iMessage
http://support.apple.com/kb/HT3529
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

I have footage shot on a p2 camera, why won't all of the clips transfer when using Log and Transfer?

Only about 60% of the clips transferred over or was shown in the Log and Transfer window.

Offload the cards...back them up. That is priority #1. Do that first...then return the camera. Then try mucking about with this.
Back up the ENTIRE card structure.

My inbox indicates a message is receive but all my message are open and so how can I fix this that the inbox will not indicate that I receive a message (one)

my inbox indicates a message is receive but all my message are open and so how can I fix this that the inbox will not indicate that I receive a message. It shows that I received one message?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion). How do I get all my stuff to appear when using Mavericks?

Will someone please help me?
My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion). How do I get all my stuff to appear when using Mavericks?
My email did transfer over.
Thank you.

First click on the Apple > Logout and Log back in or restart the unit see if that solves it. If it doesn't do you have a backup of your system prior to upgrade? Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

My CD reader says all my CDs are empty when I know they are not. Is my reader down or is there a setting that is off?

My CD reader says all my CDs are empty when I know they are not. Is my reader down or is there a setting that is off?

Yes. you should keep your media in iTunes, and indeed you should also keep a backup of your library as well. if you have the device set up for manual management then the content would remain on it when deleted from the library, but you would have no way to restore the device if there was a problem.
See also: Getting iTunes & Windows Media Player to play nicely
tt2

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a problem with this version?

Question
When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a proble

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

All FRM messages are suppressed after buissness rules validation

hello,
i've just discovered this really odd and annoying problem and I need some help. After validating business rules all forms messages are suppressed. If I re-enter the form, messages appear again, but are "visible" only till next business rules validation.
this is the scenario:
1. When I enter the form, I disable all business rules
2. I insert some data and commit. Message FRM-40400 appears.
3. I validate business rules by pressing button "Validate" (I call procedure which enables all business rules, calls procedure capi.validate_all_static_br, disables business rules and displays errors with Qms$errors.RaiseQMSFailure)
4. if i change some data and commit, message FRM-40400 does not appear.
I've done some debugging and discovered problem in qmslib65.pll package qms$forms_errors procedure push
PROCEDURE Push
( p_msg IN VARCHAR2
, p_error IN VARCHAR2 DEFAULT 'I'
, p_msg_type IN VARCHAR2 DEFAULT ''
, p_msgid IN NUMBER DEFAULT 0
, p_loc IN VARCHAR2 DEFAULT '') IS
-- Purpose Show message to the end-user, standard procedure for the Oracle Forms
-- Generator of Designer/2000 to pass the display and handling of a message
-- to a user created procedure.
-- Usage Called by the Oracle Forms Generator code
-- Parameters : msg Text message
-- error ERRor or WARNing
-- msg_type ORA, API or user TLA
-- msg_id Id of message
-- loc Location where error occured
-- Remarks
v_msg VARCHAR2(2000) := p_msg;
v_error VARCHAR2(2000) := p_error;
v_servermsg VARCHAR2(2000) := DBMS_ERROR_TEXT;
l_empty_errorrec hil_Message.message_rectype;
BEGIN
IF p_msgid != 0
THEN
g_errorrec.severity := p_error;
ELSIF ((SUBSTR (v_msg, 1, 11) = 'API Error: ')) OR
((INSTR (v_servermsg, 'ORA-20999') <> 0) AND (v_msg IS NULL)) OR
(INSTR (v_msg, 'ORA-20999') <> 0)
THEN
-- error returned from the API, just display no further action required ?
HandleServerAPIError (p_msg);
-- M. Kappel
/* 11-apr-2001
- Allow check of v_servermsg even if v_msg contains data.
- With new-style cdm ruleframe, v_msg contains 'ORA-20998'.
We never looked at v_servermsg because v_msg was not null.
- With old-style database trigger business logic, v_msg contains only text.
If we still never look at v_servermsg, we don't identify that the error is
a 20998 and therefore we raise an alert 'Transaction Failed' instead of
showing the 'Errors in this Transaction' window.
-- ELSIF ((INSTR (v_servermsg, 'ORA-20998') <> 0) AND (v_msg IS NULL)) OR
-- (INSTR (v_msg, 'ORA-20998') <> 0)
-- THEN
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0) OR
(INSTR (v_msg, 'ORA-20998') <> 0)
THEN
HandleServerApplError (p_msg);
-- error returned from the API, just display no further action required ?
ELSIF ((INSTR (v_servermsg, 'ORA-20000') <> 0) AND (v_msg IS NULL)) OR
(INSTR (v_msg, 'ORA-20000') <> 0)
THEN
-- error was raised by old Headstart code with raise_application_error
-- strip ora-20000 : , check if code (get message) or message
HandleOldHeadstart (v_servermsg);
ELSIF (SUBSTR (v_msg, 1, 3) IN ('FRM', 'MNU', 'PLS', 'SRW', 'ORA', 'REP'))
THEN
HandleOracleError (v_msg, v_error);
ELSE
HandleApplError(v_msg, v_error);
END IF;
Display_Error (g_errorrec);
g_errorrec := l_empty_errorrec;
END Push;
IMO, this part of code
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0) OR
(INSTR (v_msg, 'ORA-20998') <> 0)
is either obsolete or incomplete. It should be something like this:
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0 AND(v_msg IS NULL)) OR (INSTR (v_msg, 'ORA-20998') <> 0)
i would like to know if anyone have simmilar problem and if there are any other solutions then above mentioned.
Kind regards,
Damjan

I'm having the same problem, i'm using 6.5.22 with the C/S-kit
Is there already a solution for this problem?
Regards,
Richard Teunissen

Why is the search and logins fields are black when using AOL

Why is the search and logins fields are black when using AOL??

M3nth,
Seems like we're all asking the same question
As tst says... try not to use the one at the bottom.. it's ... hummm..
It's behavior is unpredictable...
As for the multiple listing I'll have to read Molly's response on this (I asked the same question is the "Xtreme thread")
JLV
=== EDIT ===
Hi Molly,
I read your answer on the bottom search engine..
That's what I thought it did... but it didn't work for me.. I tried to use it to find some of my own posts within LV.. and it didn't find anything.
The search was : serial
I did this while reading a LV question of the subject.
I shall experiment with the search engine again and report my findings.
R.Message Edited by JoeLabView on 03-17-2005 02:24 PM

Error "all tv tuners are currently in use"

Hi, I'm running 8.1 pro with media centre, using a known brand card, i cannot type it here as it comes up as a link, which microsoft wont allow, its a dual satellite tuner from tbs the model is 6981, with latest windows 8 drivers for that card.
However, if I'm recording a HD channel, I cannot seem to watch another hd channel at the same time, I can watch non hd channels, when a HD channel is recording. I get this message, all available tuners are currently in use (to which i can stop the recording)
I see there is a hotfix for this for W7 ultimate, which i tried for 8.1 but received an error message. Its a dual tuner!
So far,
1. I cannot record HD AND watch HD at same time.
2. If I want to record a non HD channel, and watch a HD channel at the same time, If have to be on a HD channel first, then press record on the non-HD channel. If press record on the non-HD channel first,
then go to a HD channel (second), i get the conflict issue, but not the other way around.
I have just noticed in edit sources for the HD channels, only one source is available, there should be two, I am not able to split the source, so perhaps my issue is this?
The tuner is working properly.
I also use EPG collector to load the data into MCE8, ive been on that forum, and im assured by the maker of that program, that its nothing to do with EPG collector.
Any ideas?
My specs:8.1 pro with MCE 8

its a dual satellite tuner from tbs the model is 6981, with latest windows 8 drivers for that card.
Hi,
Did you mean that, this TV tuner support two tuner at the same time when you using WMC watching TV?
According to the contents about WMC below:
With a single TV tuner connected to your computer, you can watch or record live TV in Media Center on only one channel at a time. With two TV tuners or a dual-tuner device connected to your computer, you can do the following:
Watch live TV on one channel while recording a show on a different channel.
Record two different TV shows that are on two different channels at the same time.
Watch a previously recorded show and record live shows on two different channels at the same time.
Note: you can access to the link below for more details about:
What should I know before adding TV tuners to use with Windows Media Center?
In my opinion, it should be the TV tunner card problem, it would be better to contact its support for further assistance about this problem.
Roger Lu
TechNet Community Support

Not all my messages are sinked when using IMAP and Gmail.

Similar Messages

Maybe you are looking for