Not all of the gestures work with my mid-2009 macbook's trackpad. How do I fix this?
I recently upgraded to OS 10.7. I can make the two-finger scrolling work, but I can't make the mission control or zoom gestures work. How do I properly configure configure the built-in trackpad?
The Mid 2009 is the model 5,2. These have the two button trackpad which is limited to the two finger gestures. You need the model 5,1, 6,1 or 7,1 with the buttonless glass muti-touch trackpad for the four finger gestures.
You can tell by the Trackpad pane in System Preferences. http://support.apple.com/kb/HT3448
Similar Messages
-
MS Office not working with OS 10.7.5 (Lion). How do i fix this?
MS Office not working with OS 10.7.5 (Lion). How do i fix this?
cjd3 --
Glad to see you're all sorted now.
BDA - Why, thank you, sir! -
All of the tabs that I recently opened won't close. How do I fix this?
I turned on my computer. I opened a page. None of the tabs that I've opened will go off when I click the x. What do I do?
Does that happen in Firefox safe mode? If not, it may be an extension causing the problem.
-
I have uninstalled and reinstalled and it is still not syncing right through past backing up.
Did you try another USB cable to rule out a hardware problem?
Reorganizing the library and clearing the photo cache can also help:
iTunes: Understanding iTunes Media Organization
iTunes: Understanding the iPod Photo Cache folder -
My iSight Camera is not recognized by my 2009 MacBook Pro. How do I fix this?
A couple of months ago, my camera was working just fine. Today, I attempted to open Photo Booth, and the camera won't work for anything at all.
shldr2thewheel has already given you the best answer. Just follow his advice.
• If you have not already done so, shut down Mac, restart,
and try again. If the iSight still does not work, continue.
• If Apple's http://support.apple.com/kb/HT2090
suggestions do not help you, (are you certain that you
used the correct "reset" procedure?), yours is most likely a
hardware problem that will require a professional fix.
Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
• If you want to try one more thing on your own first,
use your Mac's Disk Utility to repair permissions. Then
download and apply the latest Combo Update for
your OS. Currently, the latest ML Combo is here:
http://support.apple.com/kb/DL1581
• Repair permissions again immediately following the system restart
that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
Message was edited by: EZ Jim
Mac OSX 10.8.2 -
My iTunes was working fine, all my CDs would import fully and quickly. Now they are importing slowly and when the CDs get to the last track they don't import and the CD drive just keeps spinning without doing anything! How can I fix this?
I don't want to have to restart or reinstall my iTunes again as I'll have to redo all my playlists etcLikely that CD then. Check visually for damage, blemishes, etc., not that there's anything you can really do about those other than return the CD.
The drive sits there and spins because it is trying to re-read the CD. iTunes has error correction which is contributing to all this re-reading, I believe, and you may be able to disable that in preferences if you aren't picky about the result.
You can also try other rippers such as Max or XLD. I know those have configurable error correction. I like XLD but it is slightly tricky to use until you find that for some reason the author has put all settings under preferences, not just the set once and forget ones. -
I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result -
I am not able to see the airplay icon with Maverick. Can anyone help on how to go about this?
Does restarting the router help?
Best. -
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?
How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0F
SMC Version (system): 1.57f18You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV -
I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.
What computer do you have? is it 32 or 64 bit operating system?
-
I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
My visual voice mail does not work,but I have properly set it up, how do I fix this?
Visual Voicemail is all carrier side, funny enough. Apple can't really do anything to troubleshoot it because it's outside of their realm. Be sure to contact your cellular carrier for further assistance
-
Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.
Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.
-
I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??
Turn off iMessage on the iPhone as should have been done prior to switching devices.
Settings > Messages > iMessage > OFF -
I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?
Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html
Maybe you are looking for
-
Labview with Vista 64 bit native support
I'm waiting day after day to see a new Labview release supporting Vista 64 bit (I mean running at 64bit natively and not in a 32bit emulation layer). I expected it last year... then I waited believing that of course... it'll come soon... but now I'm
-
BI Reporting across multiple approval years - IM program position hierarchy
Hi, We have an issue with our BI report whereby if a user wants to report year to date actuals for financial year 2010, they need to run the IM report twice. This is because the IM report is run with a program hierarchy(based on 0PROG_POS), and the i
-
I've upgraded from GoLive and have installed flash buttons/text on 2 sites. I started working on a 3rd site and now every time I create a flash button/text I get the message : "invalid name". Usually the name is xxx.swf. Just when I was starting to l
-
Hi, I have runing Oracle Coherence GE 3.6.0.4 in my both machines. And also i configured it to use log4j framework for logging. Here is my log4j.properties: log4j.logger.Coherence=9, CONSOLE, FILE log4j.appender.CONSOLE=org.apache.log4j.ConsoleAppend
-
hi i m very basic HTML designer and have created a site for a friend's disabilty organisation, they wanted google site and web search on their home page for their clients to use when using their free internet facilities at their disability shop. But