Not all records are updated in DSO
Dear Friends
My Scenario is SAP - FM -> DataSource -> InfoPackage -> DTP ->Transformation - > DSO.
I have 896 Records in my PSA , but when I run DTP to load the data in DSO only 817 records are added, rest records are not updated. I have supplied
Purchasing organization 0PURCH_ORG
Purchasing Group 0PUR_GROUP
Vendor 0VENDOR
BW: Document Number 0DOC_NUM
BW: Document Item Number 0DOC_ITEM
Material 0MATERIAL
Accounting document number 0AC_DOC_NO
Item in Material Document ZZEILE
as key fields of DSO.
can you suggest me what could be possible reason for not having all the records.
Regards
Naim
Hi,
is it full load?
Have you applied any filters at dtp level?
if its full load then delete whole psa data and dso data.
reload them again and see the count.
As per dso primary keys, same combination data will over write it.
how many records count you see at dso-->manage-->request tab
Added and transferred.
Thanks
Similar Messages
-
Not all tables are updated in a .xlf document
One table from 6 is updated only in a .xlf document via Life Office connection. Why?
Hi,
if im nt wrong ..
u have 6 quiries which take date range as input ie from today to last month first date.
Now:
is the date format in excel cell same as the date format of ur query !
coz query will be triggered only if u give date in its specific format.
are you taking i/p from dash board!
range also should be same as ur query range( to - from or from - to )
if you have different date formats for 6 quiries
take the dates seperately for all those which are not same
suppose query1,query2,query3 takes i/p as DD.MM.YYYY and
query4,query5,query6 takes i/p as DD.MM.YYYY hh.mm then take 2 date ranges seperately
if ur using live office connection to refresh the dashboards concatenate the cells and give the concatenated cell to refresh your data.
Range 1 DD.MM.YYYY to DD.MM.YYYY --->concatenate both the dates and give the concatenated cell to refresh the corressponding query liveoffice connection.
similarly DD.MM.YYYY.hh.mm to DD.MM.YYYY.hh.mm --->concatenate both the dates and give the concatenated cell to refresh the corressponding query liveoffice connection
@Sri -
My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?
Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks. -
Not all users are displayed for log on after a reboot or startup...
Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support -
Hi, all!
We use BPC MS 7.5 sp 06.
We try import txt file. But not all records loaded.
We checked tmp file that generated during Import and saw that all files that we try to import exceeds max 1,265 KB, and last record in this file not the same as in source file.
And at all not all records imported in application and there isn't errors during Import.
Does anybode know how to change this limit?
Best regards,
IaroslavHi,
Once again, the number of records might not be similar in BPC and file. The reason behind this is the records might get aggregated while importing. Hence, you should consider this while comparing the data.
Let me give an example to explain this scenario.
Lets say below are the records in your file:
ACCOUNT ENTITY CATEGORY VENDOR AMOUNT
ACC1 ABC ACTUAL 1234 1000
ACC1 ABC ACTUAL 5678 2000
One you import the data, if your application doesnt have VENDOR dimension, then the 2 records will get aggregated and will be displayed as:
ACCOUNT ENTITY CATEGORY AMOUNT
ACC1 ABC ACTUAL 3000
So, you see, the source file has 2 records. However, the application has only 1 record. So, the record count doesnt match. You wont even get any rejected count, because both the records from the file have been imported successfully. Its just that the records have been aggregated.
Please note that the above example is just to show you how the records will get aggregated.
Hope this helps. -
i keep getting banner that there is 8 apps to be updated, when i go to the App Store it says all app are updated, how do i get this to stop?
It seems that every time I start up the IPad the banner over ITunes shows 8 or more in the banner. I have completly signed off of the ipad and it still comes up. Any suggestions? It seems to have coincided with IOS 7 being released, I have not downloaded IOS 7 to my IPad or my Iphone at this time.I"m not sure exactly what to do because once I got mine sorted out I can't exactly replicate it to test it, but it's like somehow your ID gets messed up.
I tried to download an app, then Apple thought that I'd never bought anything from my device so went through the whole 'give your secret questions' thing and ended up having to call apple to get them to reset.
Long story short, the inability to update has something to do with the App Store not recognizing your device, even though part of it does recognize your device (which is why you get the little badges)
You could try downloading a free app and see if you can verify your ID. Or you can poke around in here
http://www.apple.com/support/appleid/
and see if you can manage your account and see if that helps. -
Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed. Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts. I am a developer trying to learn how to help my area schools and also have some ideas for my own courses. Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified. I would hate to develop something just to later find out it is against the apple iTunes U agreement.Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks. -
How to read some records from a text file into java(not all records)
hello,
how to read text files into java. i need only few records from the text file not all records at a time.
If any one knows plz reply me
my id is [email protected]this snipet reads a text file line by line from line 1 to 3
try {
FileReader fr = new FileReader(directory);
BufferedReader br = new BufferedReader(fr);
int counter = 0;
while ((dbconn = br.readLine()) != null) {
switch(counter){
case 0:
status = dbconn;
break;
case 1:
userName = dbconn;
break;
case 2:
apword = dbconn;
break;
counter++;
br.close();
}catch(IOException e){
} -
All plugins are updated. This has only started happening recently. Plugins seems to launch for a few seconds (no more than 5) and then crash. Chances are that there is more than a problem with just Silverlight and Flash but they are the only two that I really use.
Perform the suggestions mentioned in the following articles:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
Check and tell if its working. -
BPM Monitoring: not all messages are groupped my bpm name
Could you explain me why not all messages are groupped my bpm name?
There are messages above bpm name that was sent in this bpm.
It is too diffucult to monitor messages in BPM monitoring.Hi Denis,
Is the concerned message a synchronous message or a message that relates two integration processes? If yes, this about to be changed and will be corrected in the next SP.
Best regards
Joachim -
trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?
Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them. Report back with the results.
OT -
When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?
I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John -
Home sharing iMac and MacBook Pro: not all songs are playable
Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.
-
Not all albums are syncing with between itunes match and iphone 5.. WHY!!!
First, disable iTunes Match on the iPhone. Open the Music app and let the content clear out. Now, in iTunes, disable iTunes Match while holding down the Option key (Shift for Windows). Quit iTunes, wait a few seconds, and re-open it. Turn iTM back on and let it complete it's scan. The songs that are "waiting" ought to get converted to "purchased," "uploaded" or "matched." Once the scan is complete re-enable the service on the iPhone.
-
How to request - Updating an embedded image in a PDF using Actions but not all actions are recorded
i am trying to create an Action in CS3 but some of my actions are not been recorded.
What i want to do is run the Batch option on a folder with a 1,000 PDFs in it. The PDFs
(which were created in Illustrator CS3) consist of a single page with a single embedded
image at the foot of the page. I am trying to update that embedded image.
The Actions i am trying to record are...
1) Select the single image in the Links palette.
2) Choose the "Relink.." option in the drop down menu of the Links palette.
3) Navigate to the new image and select "Place".
4) Save and close document.
But the first two actions are not been recorded.
How do i get around this problem ?
Note: From trying this manually the new image seems to take on the horizontal and
vertical scaling of the previous image which is what i want. But if i am going to have to
do a script then that is a factor that may have to be incorporated into the script.
Any help appreciated.Give this a trial… It does a save as which is much safer than overwriting… At least you still have your originals should I get something wrong…? I did test but only with 3 files…
#target illustrator
function replaceImage() {
var i, doc, fileList, inFolder, outFolder, opts, pic, rep, rip, saveFile, uIL;
inFolder = Folder.selectDialog( 'Please choose your Folder of AI PDFs…' );
outFolder = Folder.selectDialog( 'Please choose a Folder to save AI PDFs in…' );
pic = File.openDialog( 'Please choose your replacement Image…' );
if ( inFolder != null && outFolder != null && pic != null ) {
fileList = inFolder.getFiles( /\.pdf$/i );
if ( fileList.length > 0 ) {
uIL = app.userInteractionLevel;
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
for ( i = 0; i < fileList.length; i++ ) {
doc = app.open( fileList[i] );
rip = doc.rasterItems[0].position;
rep = doc.placedItems.add();
rep.file = pic;
rep.move( doc.rasterItems[0], ElementPlacement.PLACEBEFORE )
rep.position = rip;
rep.resize( 31.414, 31.414, true, true, true, true, 100, Transformation.TOPLEFT );
doc.rasterItems[0].remove();
rep.embed();
opts = new PDFSaveOptions();
opts.pDFPreset = '[Illustrator Default]';
saveFile = File( outFolder + '/' + doc.name );
doc.saveAs( saveFile, opts );
doc.close( SaveOptions.DONOTSAVECHANGES );
app.userInteractionLevel = uIL;
} else {
alert( 'This Folder contained NO Illustrator PDF files?' );
replaceImage();
Maybe you are looking for
-
Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.
-
Percentage based ONLY on a total in a crosstab report
HI all, I created a report (crosstab), very simple, in which I show on the rows the STEPS and on the columns the SITUATIONS. So, for every intersection I have a value as usual (the TICKET_COUNT) Then, I added the Totals at the bottom and on the right
-
Hard drive running constantly despite no material programs running
I have an iMac that has been a home computer for about two years now. The hard drive is 1TB, which has 111 GB free. It has 4GB in memory. Over the past few weeks it has begun to operate very sluggish and now requires a force shut down of programs reg
-
When I open my files in bridge with CC, the images are no longer in numeric order but scrambled in what appears to be exposure values. When I use the CS5 software the files are fine so that should rule out a hard drive problem. It is a consistent pro
-
Web Layer locked into sharing on all states?
Is there any way to unlock the web layer so that it doesn't share all hotspots/slices on all states within a page? I would like to modify the hotspots of a page based on the current state. Any help would be greatly appreciated! Mark