Not all reservation could be blocked

When we do the CO13,then the system give me the error message"No
reservations could be blocked".
What does it mean and how to get rid of this?

Mayuresh,
Its looks like some user is in the change mode of the order or performing confirmation, due to this system is not able to allow you to perform the cancellation of confirmation. Request all your users to come out of the order and then you can try.
Regards,
Prasobh

Similar Messages

Error "Not all data could be changed in LC" when running DP macro

We are getting the error, "Not all data could be changed in LC" when running DP macros and we are not sure why. It seems to only happen when we are executing it via a Process Chain but not using the DP background processing scheduling. Does anyone know why this is happening?

Hi Stacy,
I hope you are seeing this in message spool. This message comes up for various reasons. We used to see a message saying "No data saved".
Some of the reasons could be " the new value (lets say 3 ) after the macro execution is same as after execution (3)".
See if some of the values are fixed and could not be changed.
I would take a selection id with just few values and execute the job for that selection id and compare the pre and after results. That should answer all your questions.

Not all data could be changed in LC (Message no. /SAPAPO/TS007)

Hi Experts,
When I run forecasting through automodel(strategy 56) in the background, For some combinations I got the warning message "Not all data could be changed in LC" (Message no. /SAPAPO/TS007). What does this message means?
Thanks & Regards
Yogeesha

Hi
Logically whenever you create a new CVCs in APO system you should execute the job /SAPAPO/TS_LCM_CONS_CHECK
by default which will assign time series for the newly created CVCs.
In the following case, it looks like you have created CVCs and than during th FCST job as it does not found the time series for newly created CVCs you received the following errors.
You can execute the report now which will fix the issue, but I will suggest to execute this once CVC job creation is done as regular process.
Please let us know, if this helps to answer you question.
Thanks & Regards
Amol

Not all PDF could be viewed as thumbnail?

When I choose the thumbnail view in Windows Explorer, some PDF could show the 1st page as the thumbnail, however some couldn't(the Adobe PDF logo instead).
I've noticed this for a while, and tried to find out why.
To my surprise, it seems this happens regardless of the content/version of the PDF file, nor the version of Adobe Reader/Windows.
Could anyone show me the truth?

This is a question for the Acrobat or Reader support forums, not here...

Could not get VHB/MDB at block on USB Thumb drive

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

I'm trying to not have to shell out $100 for DiskWarrior and because im on a Macbook Air, with no media drive, so i think i'd have to shell for a usb optical drive too.... so if someone can help me with this stupid, stupid, occurance (which will teach me to NEVER use hfs+ again), I'd be really appreciative.
I have a PNY 64GB usb 2.0 thumbdrive and it pooped the bed on me....here is all the diagnostic information i can provide
from fsck_hfs -d:
Unable to open block device /dev/disk1: Resource busyjournal_replay(/dev/disk1) returned 16
** /dev/rdisk1 (NO WRITE)
          Using cacheBlockSize=32K cacheTotalBlock=16384 cacheSize=524288K.
   Executing fsck_hfs (version diskdev_cmds-540.1~44).
          Block 2 is not an MDB or Volume Header
          CheckForClean - could not get VHB/MDB at block 133512190
** Checking Journaled HFS Plus volume.
   Invalid B-tree node size
(3, 0)
** The volume   could not be verified completely.
          volume check failed with error 7
          volume type is pure HFS+
          primary MDB is at block 0 0x00
          alternate MDB is at block 0 0x00
          primary VHB is at block 2 0x02
          alternate VHB is at block 133512190 0x7f53bfe
          sector size = 512 0x200
          VolumeObject flags = 0x05
          total sectors for volume = 133512192 0x7f53c00
          total sectors for embedded volume = 0 0x00
from console logs:
6/29/12 9:30:42.000 AM kernel: hfs_swap_BTNode: invalid forward link (0x0a0d0321 >= 0x00001880)
6/29/12 9:30:42.000 AM kernel: hfs: node=5 fileID=4 volume=Windows7 device=/dev/disk1s1
6/29/12 9:30:42.000 AM kernel: hfs: Runtime corruption detected on Windows7, fsck will be forced on next mount.
all my files are flipping gone, but it sure kep the directories.....yay
Thanks in advance for any help

When releasing a transp. req.not all object in the request could be locked

When trying to release a transport request I get error message that "not all object in the request could be locked. Do you want to release them anyway"
I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
If I release the transport anyway what could happen?

Hi Tina,
If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
1. Go to SE10 and click on create button
2. u will get a popup select the 3rd radio button(ToC)
3 Give the decsription of the Tp
4. u will get anext screen here in menu select request
task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
Regard
Anees Ahned

Trigger line requested could not be reserved because it is already in use.

Hi , I am trying to export markers on PFI0 and PXI_Trig0 on NI5450 (in the script mode)
using the following code
There are no errors when I configure using the following code.
commWrapper.ExportSignal(PXICommonGenWrapper.niFgenConstants.MarkerEvent, "Marker1", "PFI0")
commWrapper.ExportSignal(PXICommonGenWrapper.niFgenConstants.Marker, "Marker0", "PXI_Trig0")
When I run the script, I get the following error
Trigger line requested could not be reserved because it is already in use.
Property: Marker Event Output Terminal
Destination Device: PXI1Slot2
Status Code: -89126
Would appreciate any solution that enables to me configure the two triggers/markers. I use these markers to trigger another PXI card (NI5644R on PXI_Trig0) and an external piece of equipment (using PFI0 output).
Thank you.
Solved!
Go to Solution.

Hi Surya,
Thanks for posting this on the community page. What this error is telling you is that it can't route a trigger to your requested destination because something else has already reserved that trigger line. One pottential typo is that your second ExportSignal command specifies niFgenConstants.Marker and not .MarkerEvent. This is a simple error to resolve but there are many possible sources. Is it possible for you to share the full code with me? Or,maybe you could host a join.me session and I can look at your full setup.
Sean Ferguson
Application Engineering Specialist | RF and Reconfigurable Test

Seeing a lot of ERROR - could not decrypt password Given final block not...

What cause these error messages in DPS 6.x?
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:55 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:56 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded
[18/Apr/2009:23:05:57 -0400] - CONFIG - ERROR - could not decrypt password Given final block not properly padded

You have copied a DPS configuration (conf.ldif) from one instance to another one.
Passwords are encrypted in the conf.ldif with an instance-specific key.
2 ways to address the problem:
- either
stop the proxy, manually edit the conf.ldif and replace encrypted values (prefixed by {3DES})
with the value in clear.
DPS will encrypt them again during next startup.
- or
copy the dps keystore files (in alias if I remember well) to the target dps instance as the keystore
contains the encryption key.

Transport Release Error: Not all objects in the request could be locked.

Hi all!
I hope you can help me with this one.
We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
'Not all objects in the request could be locked. Do you want to release anyway?'
I tried to display the error and below is the object messages:
Object messages: R3TR TABU ZLIFNR
Task F5DK900107 belongs to a different category
I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
Thank you very much.
Regards,
April

Hi!
There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
=) Thank you...

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized". Any ideas?

Hi,
I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
After that, you should be able to scan documents with the Preview App.
For more information on the printing system in OS X Snow Leopard visit:
http://support.apple.com/kb/HT3771
Hope this helps!

Hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone.

CM: how to block the last new sales order only and not all of them?

Hi,
We are testing the FSCM-CM and try to figure out this:
We have for a customer a number of open sales orders that are all below the credit limit.
Now someone creaetes a new order and with that amount the limit is exceeded.
The system reaction is that all open orders are blocked.
How can we set the system that only the last one is blocked?
Thanks in advance
Hein

Hein,
I dont think there is any standard function which specially points to the last order. System will consider all the orders in which the customer is involved. I think, the above post suggest the of number of days but not the last order. Try to play with the attributes of system messages and I am sure you will get a clue from it..
Reward if helpful..
Thanks,
Srib

My iPad is not even 6 months old but it will not turn on at all. Could it be battery?, My iPad is not even 6 months old but it will not turn on at all. Could it be battery?

My iPad is not even 6 months old but it will not turn on at all. Could it be the battery?

First thing to do is plug it into the charger that came with you iPad and plug that into a known good wall outlet. Let it remain plugged in for at least one hour before attempting to turn it on. If it comes on leave it plugged in until it is fullya charged. If it doesn't come on Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Not all Pictures are getting sync

I have the New iPad and Windows 7 with the latest version of iTunes. I have a folders with many pictures in them. I am trying to sync these pictures to the iPAd. I select the folders I want and the picture start to sync but not all the picture copy over to the ipad I have cleared the itune photo cash folder. Please help I bought this so I could copy my pictures to it and it is not working right. Please help.

It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Firefox is failing to display many (but not all) images on websites that I visit, some images are shown and some are not even if they are in the same format.

I recently changed my ISP because I was having connectivity issues. In particular my router would shut down sporadically. As part of my attempt to clear issues I ran some spyware software which I've been told I could trust. Since then I have a problem viewing many websites as many (but not all) of the images are missing, even on websites that I know very well, including my own. What is very strange is that on one site every page has a jpg image under the navigation bar and all of these jpg's appear except one which doesn't appear even when I reload images. This problem also makes security sensitive sites like my bank site look very amateur which frightens me. The problem does not occur on other web browsers.

Which ''spyware software'' software did you run?
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Not all reservation could be blocked

Similar Messages

Maybe you are looking for