Not all Test Transports Imported

I have run into several instances where a transport tied to a change request has been released before a generated test transport could be created and imported into the test system. Once this occurs the generate test transport action will not execute from within the Change Request for an associate transport that is already released.
My issue is that I need to progress the Change Request from a status of To Be Tested to Consolidated, but this action will not set without all test transports having been imported into the test system (ala generated test transport). Is there a way to override this requirement where a transport was released before a generated test transport was created per my above scenario?
Edited by: Kevin Richman on Nov 17, 2009 1:40 PM
Edited by: Kevin Richman on Nov 18, 2009 9:30 PM

Kevin,
When an action within ChaRM is executed, several conditions are checked.
In the standard process, the condition IMPORT_OF_COPIES_OK is activated on a specific status.
You can eliminate this condition from your process if you like. Go to the IMG of SolMan and search for 'Assign Conditions to Status Values'.
Best regards,
Roel

Similar Messages

Not all files will import from NAS Synology Server to PC running LR 5.3

We recently moved our photos to a new Synolgy NAS server. I have a Lenovo all in one and installed the latest version of LightRoom 5.3. When I import my photos, not all of them get imported, only a fraction of them. I can see all the photos on the server via the run command but after I import not all the photos get transferred over. Does anyone else have this issue? What would cause this bottle neck?

Well, well what do you know.. it just came up..
I moved all files from the LR folder except the catalog, rebooted and it came up...
I guess the next thing to do is to get the previews back.
Hope this is a good sign...

IPhoto to Aperture 3 import - not all photos get imported...

Hello - My library is not huge, only about 8000 photos. Just bought Aperture 3 and imported my iPhoto library into A3. Seemed to go without issues. Today, as I re-organize a few folders, projects, etc., I realize that not all the photos were imported. About 700, to be exact. Every named Event in iPhoto imported over into A3, but not all photos within each Event (now Project). Any thoughts on what could have happened and how this could be avoided?
I could import each Event individually, but then I would loose all my keywords. Any work around you can think of? Thanks!

Try rebuild your iPhoto Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
I would import each event individually, but I would like my keywords preserved
Using the iPhoto Media Browser (File -> Import -> Show iPhoto Browser) will get your keywords too.
Regards
TD
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Not all my games imported

I just got an iPod nano to replace my G5 iPod, and I have TONS of games I bought on iTunes, and so I know that not all games work on the iPod Nano, so all the games that are supposed to transfer, transfered except for Tetris. Why wont tetris transfer?

Anyone know?

Not all steps transported to other system

Hi,
I'm facing a strange problem :
I did some changes on a workflow in the dev-environment. After testing it, we executed the transports to implement the changes on the test-environment.
But the changes I have done aren 't implemented on the workflow in test !
All newly created tasks are transported, but the new steps in the wf are not created.
Apparently, someone did a change directly in test and activated the workflow there.
Can this be the reason ? If so, can someone explain me how I can get the version from dev to test ?
Recreating steps on test is not an option, I want to make sure that everything goed with a transport (otherwise, I have to do the changes on the live system also..)
thanks for the help !

Hi Jasper,
thanks for the suggestion, but I tried that already. The new version isn 't transported at all.
It's really bizarre.. I found a note on sap.com, but I'm not entirly sure it will solve my problem...
it 's note 967392...

Not all songs will import from CDs

When importing CDs certain songs won't import, the computer will say that the file name is too long or invalid, and usually the song has a longer title, but they may be a coincidence. I'm worried that if I get new cds I won't be able to import all the songs, but I just got the new Norah Jones cd and was able to import all of her songs. I am wondering if it depends on how old the cd is, since the on I tried importing today was a Linda Ronstadt cd, not exactly recent. But my Prince Caspian soundtrack won't import all the songs either, so this can't be the case. I would love to solve this problem and appreciate all who will answer this!
P.S. I tried changing the name but once imported the song will not play

I'm having this issue also. I don't have the 5 but I upgraded my 4 to the new iOS6 and updated to the new version of itunes as well, now I cannot copy any music from my computer to my phone, it just stays grayed out and doesn't actually copy.

Not all songs will import.

I've tried drag and drop and importing and all that...but for some reason, some albums just won't appear. I get no error message or anything, they just aren't there. I can click on the songs and they'll play in itunes, but they import. I have one album that imported 2 songs. The other 10 just don't import. What am I missing here? And yes, they are the proper file types.

First look at the CD and see if its protected.
Secondly goto the PC makers site (If the CD Burner came witht he PC when you bought it) and look for updates for your model, like Firmware updates for the CD ROM and BIOs/chipset updates for the system.

Not all videos will import into iphoto...

hi,
i cannot get all my videos to import into iphoto 09. the process stops with an error "there was an error importing Photo".
what is causing this and is there a workaround?
please advise.
thank you.

hi,
ty, i will give your suggestion a try.
also, i solved the problem by resetting the phone. hold down the sleep-switch and home button together for 10sec and then when you get the quit screen keep holding down the two buttons together.
this also solved the problem..

Not all calendars to import from iCal

Hi! I hope someone can help me.
I'm trying to import a calendar from iCal to iPhoto but there are only 2 calendars listed in the iPhoto list (and I have 6 in iCal). To make it easier to understand, I took two pics of my screen:
This is the calendars available to import in iPhoto: http://img42.imageshack.us/img42/565/screenshot20100110at133.png
This is the calendars that I have in iCal: http://img96.imageshack.us/img96/565/screenshot20100110at133.png
I want to import the blue "Birthday" calendar under Delegates.
How can I do this?
Thank you.

First move the iCal preference file, com.apple.iCal.plist, and the iPhoto preference file, iPhoto preference file, com.apple.iPhoto.plist, that reside in your User/Library/Preferences folder to the Desktop. Launch iCal and reset the preferences. Next launch iPhoto and do the same. Go to the calendar, enter the Settings pane and see if the Delegated/Subscribed calendars are visible.

Not all my bookmarks imported from Navigator(AOL Netscape) to Firefox

I just downloaded and installed Firefox 5.01. When I tried to import my bookmarks from Netscape Navigator (9.006) only a few would import.

See this: <br />
https://support.mozilla.com/en-US/kb/Importing%20bookmarks%20from%20Google%20Chrome

Import steps not specific to Transport Request

Hi all,
I need to move 5 Released Transport Request as "Local Change Requests" to another SAP installation.
I followed two guides to do this:
SAP BASIS / ABAP - How to Export and Import an External Change Request - YouTube
How to copy Repository Objects between non-connected SAP systems - ABAP Development - SCN Wiki
However I have problems creating the Change Request that contains all my requests: if I generate it as Local Change Request it is not available on cofiles and data folders.
So I created a new Virtual System called M02 and I created a standard consolidation transport link between my original system M01 and the virtual system M02.
Then I created a new TRANSPORT OF COPIES Transport Request and I selected as target system M02. All objects are correctly added to the new request and the validation is correctly performed.
However when I release the request on the SOURCE server I get the following error:
M01#######            My Request Name
M01        System M01
             Checks at Operating System Level         05.03.2014 16:48:34    (0) Successfully Completed
             Pre-Export Methods                       05.03.2014 16:48:37    (0) Successfully Completed
             Export                                   05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
M02        Virtual System
             Selection for Import                     05.03.2014 16:48:47    (0) Successfully Completed
      Import steps not specific to transport request
"Import steps not specific to transport request" expanded as:
Feedback after export or import 05.03.2014 16:48:48    (0) Successfully Completed
I get this message even if I generate the new Change Request from a single Change Request (the first one that we released).
The cofiles and data files are correctly generated, however the IMPORT on the TARGET server returns an error (invalid data package)
My question is: is the "Import steps not specific to transport request" message correct, or should I modify something? Why am I getting this message?
Thank you

Hi Chinna,
Its a warning message you can ignore that... if you want to see what exactly the reason for warning in SE09 --> select the released request --> click the Transport Log Ikon --> select the warning message and click the spects Ikon --> go on expanding you can find the warnings of Objects in Yellow...
Hope this helps,
Sudhakar.

UST12: not all entries moved during import

Hi there,
Today I faced the issue below.
When comparing a single role from Dev with QAS system via SUIM it showed that role in QAS does not contain some auth objects whereas they existed in PFCG/AGR_1251 (after transport was imported into QA). As far as I know SUIM uses UST* tables for reporting. I checked UST12 table (the only UST* table the transport consisted of) and found that indeed some objects were missing for certain profiles.
transport logs for Import phase into QA showed entries like that:
3 entries for UST12 imported (100V_VBAK_AATT-ED78820508A*).#
0 d /   0 i /   0 u /   4 = 100% ucf UST12 #
4 entries for UST12 imported (100V_VBAK_VKOT-ED78820508A*).#
3 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
0 entries from UST12 (100V_VBRK_FKAT-ED78820500A%) deleted.#
0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
3 entries for UST12 imported (100V_VBRK_FKAT-ED78820512A*).#
3 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
0 entries from UST12 (100V_VBRK_VKOT-ED78820500A%) deleted.#
0 d /   0 i /   0 u /   3 = 100% ucf UST12 #
3 entries for UST12 imported (100V_VBUK_FRET-ED78820510A*).#
8 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
0 entries from UST12 (100ZERU_BUKRST-ED78820500A%) deleted.#
Newer transport that changed other objects of this role did not contain "deleted" entries in transport log for UST12 table, only "imported' ones. After moving this to QA, UST12 was "synced" with AGR* and SUIM comparison report works as expected.
What is a reason for TMS to not import all entries for UST12 but to delete some?
I tend to think this could happen again and confuse those people using SUIM for security changes controls in our organization.
I checked recent notes regarding SUIM reports but it looks like they have been implemented already.
Thanks in advance,
Igor

>
Igor Kustov wrote:
> {quote
> > Hi,
> > possibly changes have been performed to the role in DEV after it had been inserted into the transport. In contrast to normal transports role transports behave a bit different at the moment. Only after you have finished your changes and generated the profile you should insert the role into a transport
>
> As far as I understand during transport release it takes current "snapshot" of the tables for Roles/profiles, so any changes made to the role after transport was created but until released   would be put into that request, right? This seems proved to be true as PFCG/AGR_1251 contained correct values in QAS. So, the problem is that during release of transport not all needed tables related to user/role management are "pictured" and put into the request i.e. some tables (UST*) are "pictured" only when role is being put into request, correct?.
This is a common rumor......
Please read: https://service.sap.com/sap/support/notes/571276
Ther exists already 1 discussion about this fact in this forum....
>
>
> > As per your description it would have been sufficient, to generate the profile in QAS to have the current profile again. At generation the AGR_data is put into the USR/UST*-tables.
>
> Well, when changes to the role are moved new profile is generated automatically in the target system, therefore values from AGR* should populate UST* tables? Or I am missing something..
Well only, if you use the procedure mentioned above.
US*-table content is only created when generating the profile. So if you have more data in AGr-tables, the profiles are not actual.
b.rgds, Bernhard

Not all characters showing up in "Import Settings" dialogue

On the "Import Settings" dialogue in preferences, not all characters are shown when you select an encoder and use a custom setting.
For example:
When you select AIFF encoder and click "Custom...", sample rate and channel is shown as "sample rat" and "channe".
Can someone tell Apple to fix this?

Sounds like you have "Compilations" switched on.
In Itunes look at "get info" for the missing artists and see if the part of a compilation box is checked.
On you iPod go to settings>compilations and toggle it to off
To get the artists to show up on the Ipod you only need to do step 2.
When you have the compiliations features switched on (in either iTunes or iPod) artists that only have albums that are compilations will not show up in the artist list.
As for your other problem you can sort the columns by clicking on the title bar at the top, to sort by artist or you can add something to the "Greatest Hits" album title to differentiate it - for example all my greatest hits albums are titled GH - Artist so I know which one is which

Import not all records

Hi, all!
We use BPC MS 7.5 sp 06.
We try import txt file. But not all records loaded.
We checked tmp file that generated during Import and saw that all files that we try to import exceeds max 1,265 KB, and last record in this file not the same as in source file.
And at all not all records imported in application and there isn't errors during Import.
Does anybode know how to change this limit?
Best regards,
Iaroslav

Hi,
Once again, the number of records might not be similar in BPC and file. The reason behind this is the records might get aggregated while importing. Hence, you should consider this while comparing the data.
Let me give an example to explain this scenario.
Lets say below are the records in your file:
ACCOUNT    ENTITY    CATEGORY    VENDOR    AMOUNT
ACC1       ABC       ACTUAL      1234      1000
ACC1       ABC       ACTUAL      5678      2000
One you import the data, if your application doesnt have VENDOR dimension, then the 2 records will get aggregated and will be displayed as:
ACCOUNT    ENTITY    CATEGORY    AMOUNT
ACC1       ABC       ACTUAL       3000
So, you see, the source file has 2 records. However, the application has only 1 record. So, the record count doesnt match. You wont even get any rejected count, because both the records from the file have been imported successfully. Its just that the records have been aggregated.
Please note that the above example is just to show you how the records will get aggregated.
Hope this helps.

After I import a CD iinto itunes,some of the tracks are not in the right order and not all of the tracks will sync to my ipod

I'm trying to import a cd into itunes but the cd tracks are out of order and when I sync the tracks to my ipod touch 4 not all tracks get synced.Can anyone please help me?thank you .

Hello Melissa,
Definitely a little odd that some episodes will sync and others will not, especially since they are from the same season. How the videos were encoded may be slightly difference, so much that your iPod no longer friends them compatible.
I would have a look at this article.
http://support.apple.com/kb/TS1497
Since these are videos that were purchased from the iTunes store, you won't be able to convert them in any way, so you may be out of luck.
B-rock

Not all Test Transports Imported

Similar Messages

Maybe you are looking for