Not all the master data values appear in variable dropdown

Hi all,
we have a BPS variable in planning folder (SEM 4.0) where we have defined a variable with 'restriction required by user'. When the uses take a drop down they don't see all the values in the dropdwon but they can still manually input the missing values.
Any idea?
BR,
SSC

Hi,
Make sure that the navigational attribute is assigned in the cube. Same goes for the workcenter. Also make sure when you loaded master data for workcenter the data for the navigational attribute also got loaded and you activated the same.
Cheers,
Kedar

Similar Messages

How to find all the Master data extract structures and Extractors

I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
Sasanka

Hi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet

Not reading the right data value

So I am reading data from a txt file that I created,in particular I am trying to pull out the first column which is the time data. When I read it using the "Read from spreadsheet file.vi" I am getting unexpected values. For example when the first value in the file is 1491.044016 it displays 1491.044067, it does this for every value? I thought it may have been a formating issue but I set the vi %.9f on the formating field I'm not sure why it is handling the values this way? Any insights?
thanks,
Chris

Are you using LabVIEW 7.1 or older? In this case, "read from spreadsheet file" uses only SGL precision, which is not sufficient for your desired resolution.
See also: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=315189#M315189
Solution: Read the file as a plain string and then use "spreadsheet string to array" with DBL as type.
... or upgrade to LabVIEW 8.0 or higher.
LabVIEW Champion . Do more with less code and in less time .

How to see where all the master data is being used

Hi Gurus:
How to see say master data XYZ is being used in ODS, IC...ETC
Thanks & Regards

hi MK K,
to check the characteristic value is used by which infoproviders, you may try
rsa1->infoobject->choose the characteristic->'master data maintenance', select the row for that characteristic value, and button 'delete' (trash icon) and 'save', you will get a message 'master data cannot be deleted'.
transaction slg1, object RSDMD, subobject MD_DEL, and execute, in next screen double click the top node, you will see the log, message text in below panel, e.g 'master data xyz(SID xxxxx) is used in /.../...'
xyz = characteristic value
/.../... = table name, can be dimension table of infocube, e.g /bic/d[infocubename]x, then you know which data target used the value.
hope this helps.

To make one column that do not have the same data value with pk

All right, here's the problem >>
I have a form on a report with columns and attributes taken from the tables in the database. 5 tables are allocated in the database, but one table is used for this "form on a report."
I named the report as a Company form, where users can add/edit company's name and details into it. However, without the use of candidate keys, how do you control the columns such that no two values are the same, although there is a primary key which i named it as company_id.
Regards,
HTMLDB user

I suggest to launch an SQL query in a validation process. The where clause would look like this PRIMARY KEY COLUMN LIKE :ITEM%
If the query retrieve at least one row then your validation process return an error and stop the saving process
If you want you can also do it asynchronous with a javascript on blur event

I converted a PDF to an excel sheet, but can't sort the data because of not all the merged data are in the same cell? What do I do?

I do a sort a converted PDF to an excel spreadsheet? The merged fields aren't the same...

Sorry, I don't understand anything. What means "merged data" and "merged fields"?
Can you perhaps provide a screenshot of the original PDF, and the resulting Excel sheet? See https://forums.adobe.com/thread/1070933

When opening certain URLs (not all), the nuisance error message appears incorrectly saying I don't have latest Java RunTime installed and activated.

The "Add-ons Manager" shows Java Platform SE 6 6.0.240.7 is enabled. But when I open certain websites the error message "We have detected that no Java Runtime is installed on your system or you are using an old version..." appears. But I can't see that it has any effect. It just delays the opening while the detection program runs. Something seems contradictory!

Have you tried installing the latest version of Java, there have been 2 updates since your version. You can get the latest version from http://java.com/

Hierarchy node Variable: F4 Help - Not showing Master data values

Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

Check on Master Data Value (User Manual Input)

Hi all,
i have the following situation:
User has to insert a set of Characteristic Value (these are not limited in level for any value nor variable) to be able to enter layout and does manual planning, with my great astonishment i have noticed that BPS does not do any check on the master data value inserted by the user, for example if user insert value '1' for 0payscalety CH instead of '01' the system does not give any error message and goes directly to perforate the Master Data with this wrong value.
Does exist any setting/tip to avoid this unpleasant situation?
Many thanks in advance
Fabio

Hello Fabio,
personal I would not set up a data model, which makes differences between 01 and 1. It is known that this will make always problems in the future.
I believe it is quite more unpleasant that SAP does not provide detailed documentation...
You can use e. g.
- conversion routine in BW char.
- message, fox
- char. rel. and / or ABAP
- drop down list which does not allow manual input
to manipulate before / after input. These are some of those possibilities, which SAP provides.
regards
Eckhard
Message was edited by: Eckhard Lewin
Message was edited by: Eckhard Lewin
Message was edited by: Eckhard Lewin

Showing master data value in report for which no record in Infoprovider

Hi,
We have the following reporting requirement. The master data values , e.g. 0Customer should appear in the report for which no sales has taken place, i.e no record in Infocube.
We have defined a multicube using Infoprovider & 0Customer Infoobject, but the report seems to show only values from InfoCube, not the values which are not there in infoprovider but are present in infoobject.
Please suggest.
Thanks & Regards
Madhu
00919830957798

Madhu,
There is a how to paper on how to do this. It available in the BW InfoIndex under Multiproviders and is called Slow Moving Inventory Scenario.
https://service.sap.com/~sapidb/011000358700008387152002
This document details out the process of reporting on master data values for which no transactions ahve been recorded. This is achieved by creating a MultiProvider on a Cube and InfoObject and then using teh record count property.
Cheers
Aneesh

SAP_INFOCUBE_DESIGNS do not shown the current data

Hi guru's,
I have deleted all data from an InfoCube with the dimensions and the data from all the master data around the InfoCube.
But when I execute SAP_INFOCUBE_DESIGNS with the transaction SE38 I see that there are rows in the F-table and the dimensions.
How is this posible??
Greetings,
Raymond

Hi,
I think the data which you are looking at is not the actual data from Infocube but the statistics prepared by report SAP_INFOCUBE_DESIGNS.
We can use this report in many scenarios for e.g.
BW program SAP_INFOCUBE_DESIGNS can be used to see whether the dimensions in our cubes were over / under the recommended percentage of the fact table as recommended by SAP.
Regards,
Durgesh.

How to find the size of the master data objects in the BW system?

Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AM

Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal

Removing all the hidden data from photos

If I export a photo to share, I often want to remove all the extra hidden stored data such as date taken exposures etc. Is this easy?
Rod

Hi rod,
By accident I found that a little app I use (ImageWell) to add connotations and text to my screenshots also strips most if not all the EXIF data from an image that you drag out of the Image well.
I just checked it out again. I dragged an image into the well, changed the name of the image and dragged it out. The EXIF data was gone when I opened it with Preview and did Tools/Get info.
ImageWell

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Master data values(navigational attributes) are not turning up in the cubes

Hi all,
I have a cube, which contains 0cust_sales as master data and i have clicked on the navigational attributes of 0cust_sales like customer grp1, 2,3,4,5 etc
But then i have the 0cus_sales number 6100034 with all the navigational attributes turning up when i look up at the master data in the quality system.
But then for the same customer number i can see the customer number but no navigational attributes are turning up!!
I have activated master data and the master data contents are active!!
Can anyone pls update me on this!!
Thanks
Pooja

Hi
It is not part of dimension only 0CUST_SALES is part of dimension,
And ocust_sales-customer grp1, 2,3,4,5 are navigational attributes in the info cube. I have just included them as navigational attributes enabled in the info cube.
And when i loaded the data for customer say 6111035 from the ods to the cube. I can see the data for customer 6110035 but cant see the navigational attributes getting populated.
But when i look at the same in the master data for 0cust_sales i can see the values for the navigational attributes too!!
Thanks
Pooja

Not all the master data values appear in variable dropdown

Similar Messages

Maybe you are looking for