Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Similar Messages

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Not all rows are displayed in OBIEE answers

Hi,
When I include a dimension column(PRODUCT) along with my fact column(SALES AMT), I am getting only one PRODUCT row displayed.
If I select just the PRODUCT column without any FACT column, I am getting the list of all PRODUCT(25 rows).
I used the query generated by OBIEE, and ran it in my database and I am getting all product listing and the sales amount. (25 rows).
I am assuming my problem is in my RPD. But where in my RPD should I look to debug this issue?
Thank you.
Edited by: ssk1974 on Jan 11, 2011 1:09 PM

This is probably correct behavior - you probably only have one product existing in your fact table? If you want to see all the lists of products along with $0 for the facts, you'd have to do an outer join between the dimension and the fact.
Of course, if your fact table does have other products in, then there's some other problem - maybe dim joined to fact on wrong column name or something.
Hope this helps,
Scott

Not all Amounts are displayed in the Query

I have an issue with my query, I am getting '*' for some of the amounts and for the other amounts it is displaying the correct value.
Can you please help me out with this issue.

This link should give you more information...
Currency Conversions

After upgraded 9.2 DB, all users are not able to login (Except Guest).

After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
Moreover, I do the following query.
SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
dual;
FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
N
If I guery the Guest account, the result is "Y".
Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
Thanks,
Matthew

Hi Arun,
What message u get on the apache logs / jserv logs when u get the error ?
Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
HP-UX 11.11To which version (5 digit) u upgraded DB ?
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

No Logged on Office Users are configured for IRM

Setup:
AD RMS on 2012 configured with https Crypto 1
Exchange 2010 SP3 RU6
Office 2013
I can open OWA and use IRM to protect a document but any Office application I open and try to protect gives me an error like this:
No Logged on Office Users are configured for Information Rights Management (IRM).
I have googled and taken a look at all of the options out there and everything seems to be configured correctly.
Any ideas or other troubleshooting tips I can do???

Hi JerHiggs123,
It seems that this is a known bug.
Please try the following fix:
Open regedit
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\Identity\Identities\[email protected]
Delete the registry key “SignedOut”=dword:00000001
If there is no such key, add it as name "SignedOut", type of REG_DWORD and value of "00000001"
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

IPad pixels are not all working so display is multicoloured any ideas

iPad pixels are not all working so display is multicoloured any ideas.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Log out a specific user after inactivity, not all users

I'd like to log out a specific user after a few minutes of inactivity. Not all users. Is there a ways to set this on a per user basis?
I know how to do it system wide.

Should be possible with this:
Workgroup Manager 10.8

Can we change log_buffer parameter online e.g. when all users are working..

Hi,
Can we change log_buffer parameter online e.g. when all users are working.. ???
What is relation between redo buffer in sga and log_buffer parameter ?
SQL> show sga
Total System Global Area 3758096384 bytes
Fixed Size 1983152 bytes
Variable Size 553655632 bytes
Database Buffers 3187671040 bytes
Redo Buffers 14786560 bytes
SQL>
SQL> show parameter log_buffer
NAME TYPE VALUE
log_buffer integer 14338048
SQL>
SQL>
If the log_buffer parameter is 14 MB then why redo buffer is no as same size e.g.
14 MB
SSM

I am hoping your Oracle Consultant know what he's talking about.
According to Oracle Performance Guide,
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref654
"On most systems, sizing the log buffer larger than 1M does not provide any performance benefit. Increasing the log buffer size does not have any negative implications on performance or recoverability. It merely uses extra memory.
The best method to determine if bigger redo buffer is needed is
SELECT NAME, VALUE
FROM V$SYSSTAT
WHERE NAME = 'redo buffer allocation retries';
The value of redo buffer allocation retries should be near zero over an interval. If this value increments consistently, then processes have had to wait for space in the redo log buffer. The wait can be caused by the log buffer being too small or by checkpointing. Increase the size of the redo log buffer, if necessary, by changing the value of the initialization parameter LOG_BUFFER. The value of this parameter is expressed in bytes. Alternatively, improve the checkpointing or archiving process.
Other than that, hight log file sync event indicate you need faster disk for your redo logfiles. However, please also post your commits per second and redo per second from your AWR report.
100M redo logs might be small for your environment.

Is GB 9.0.4 update today at App Store needed for all users, or just for Lion? Will it be in Software Update or is it paid update only? Please clarify

Is the GB 9.0.4 update today at App Store needed for all users, or just for Lion? Will it be in Software Update or is it paid update only? Please clarify.

I sure hope you are correct, Christoph. Seems one Mac site has questioned this also:
http://www.tuaw.com/2011/07/11/iphoto-garageband-and-imovie-updated-in-mac-app-s tore/
No iWeb updates either way so far. Not that I use it, just an observation.

When I upload a cvs file not all the column display in the Data / Table Mapping screen

1. I have created application using Apex Data Loading wizard. There when I am trying to load data from .csv file, but not all the columns display in the "Data / Table Mapping" screen. But if I go through AQL --> Utility --> Data Workshop, there all column display in "Data / Table Mapping" page. I want to get same thing in application I created. How will get all columns display in the screen?
2. Is there any way to select target table dynamically during runtime. So that in appication we can select different target tables with different source file to load data.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download). Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.
This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

Fair question
And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
Thanks.

The permission granted to user "Domain\user" are insufficient for performing this operation(rsAccessDenied)

Hello All,
I believe this is a very frequently-asked question in SSRS, maybe the more famous one. For many times, I solved it for others.
But today, I spent one afternoon on this issue, unresolved.
My environment: SSRS 2008R2, DB in local default instance(SQL2008 R2)
My windows account and one of my service accounts(launching my SSRS) are both in local admin group.
After configuring the SSRS, in local server, open IE(run as administrator, using my domain service account) to access "http://localhost/reports". It pops this error:
The permissions granted to user 'Doamin\myServiceAccount' are insufficient for performing this operation. (rsAccessDenied)Get Online Help
Going back to my desktop, Open IE using my windows account to access "http://servername/reports", seeing the the same error and saying my windows account doesn't have sufficient permission on that server
On Server side, use SSMS to connect local report service, and try to check who is in "system administrator" in SSRS instance, it pops up the error as below,
The permissions granted to user '' are insufficient for performing this operation. (rsAccessDenied) (Reporting Services SOAP Proxy Source)
If using IE to reach "http://localhost/reportserver"(Web Service page), both my windows account and service account work--it doesn't complain anything.
Checked all things I know, still seeing this error. Notice my windows account and my service account are both in local admin group.
Anyone can share some thoughts on this?
Derek

Figured out finally.
In rsreportserver, we put in our custom code of security control as below.
<Security>
<Extension Name="Windows"Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization,
Microsoft.ReportingServices.Authorization"/>
 
 </Security>
When I flipped it back to native mode, it works.
Thanks all your replies.
Derek

When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John

Home sharing iMac and MacBook Pro: not all songs are playable

Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue.

Not all users are displayed for log on after a reboot or startup...

Similar Messages

Maybe you are looking for