Not all V.I.s in Logic will play??

My Midi Keyboard is an 88 key M-Audio Key Controller, and I'm using a MOTU 8 pre interface. I can get most of the virtual instruments to play through my MIDI controller, but certain ones - specificaly the organs just won't play. Anybody have any clue why?

If it's the Hammond emulator (EVB3) that's giving you grief play around with the "Keyboard Split" button in the lower left. It has to be on either Split or Muilti (I don't recall which, but there's only two choices). Thatll get you going. I

Similar Messages

  • I have just updated my iPhone 4 with new ios5. I'm having trouble with ringtones. All of my ringtones exsist and will play manually on the phone but will not play when i recieve a phone call. Please help.

    Please help.

    Hello Courtney,
    Thank you for the details of the issue you are experiencing when syncing your music to your iPhone.  It sounds like iTunes is not able to locate the original file for the song to transfer it to your device.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Working on 5 movies at the same time and one will not open. It is there and will play but won't open and I can't share it or move file.

    Working on a project with 5 movies at the same time andone movie project will not open    I can see it and play it but can't open to work on it or  share or copy it, what should I do?

    WHat version of iMovie?
    ANd for iPad or iPhone?
    Are you having issues opening a video you took on the device?
    OR an issue opening a project you previously created?

  • How can I make it so all the videos in a playlist will play in order?

    I cant play more than one video in a playlist. I created a normal playlist, and put some videos in it, and after the first video is done playing in the playlist, the next one doesn't start, nor does the first one replay. HELP PLEASE!

    I use this code in the userChrome.css file.
    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    /* Forward button */
    #navigator-toolbox #forward-button {visibility:visible!important; opacity:1!important}
    #navigator-toolbox #urlbar {margin-left:0px!important}
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    * Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    * Use a plain text editor like Notepad to create a (new) userChrome.css file in this folder (the names are case sensitive)
    * Paste the code in the userChrome.css file in the editor window and make sure that the userChrome.css file starts with the default @namespace line
    * Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

  • Not all of my documents will print

    Recently installed new IMac 10. All data and software successfully transferred from old IMac. Not all of my Word/Excel documents will print. Using Epson Stylus Photo R280. All newly created documents print, but only some of my old (created prior to new IMac) documents print. Printer feeds the number of pages appropriate to the document. I have deleted the printer and re-added it, updated print drivers, and installed the most recent software updates. I have tried copying the entire document to a new document, and copying only part of the document to a new document -- all with same outcome. I can e-mail a document to my wife, and she can print the document (on the same computer). However, if I e-mail the document to myself, I cannot print the document. Lastly, I installed a new Epson Workforce 310 printer (that came with the new IMac), but experienced the exact same results. Printer is set up as a USB printer. I get no error messages of any kind.

    It sounds like this might be the font problem described here:
    http://discussions.apple.com/thread.jspa?messageID=10865066#10865066
    Hope this helps.

  • IPod Classic will play movies/videos, but no music whatsoever.

    Just recently got the iPod, secondhand, and had it restored and synced with my computer. I put all of my movies and music on it, which did not take up much space at all, and none of the songs will play. And this goes for both purchased and non purchased songs. they stay for about 5 seconds and then skip. However, all of the videos work.

    Hi there,
    I would recommend that you take a look at some of the troubleshooting steps found in the article below.
    Troubleshooting songs that skip on iPod
    http://support.apple.com/kb/TA26488
    Hope that helps,
    Griff W.

  • Upgraded to 7.7 now NO songs will play

    After upgrading to iTunes 7.7 I tired playing the songs in my library. The little speaker icon is showing next to the song, the play button is shown as 'pushed' to play...however the progress bar for *any song* I try to play is not progressing. NONE of my songs will play in my library, nor, after I plugged in my iPop, will any of my songs on my iPod play through the **** upgraded iTunes either.
    Is anyone else having this problem?
    (iTunes is loaded on work computer, window based, running windows XP)

    The little speaker icon is showing next to the song, the play button is shown as 'pushed' to play...however the progress bar for any song I try to play is not progressing.
    Are you currently also getting an "iTunes has detected a problem with your audio configuration" message when you launch iTunes?

  • Logic will not playback audio unless movie is visible?

    Hello everyone,
    I've scored many movies in Logic and except for running out of horsepower have never had a problem like this...until today.
    The problem: Whenever I dont have the movie visible, ALL audio stops!! Its not just this new project, but all past projects as well (all of which use to work fine!). For example, I can play back the movie and its audio tracks visible. But then when I close the movie, the sound will just stop. It will not return until I open the movie again. What this means is I cannot switch to my "matrix only" or my "mixer only" screensets and hear whats going on!! Its very odd!!
    I tried "OPTION-click on File -> New" to force Logic to create a fresh default song and I still get the same behavior; all audio will stop when movie is closed and will only play again if I re-opened the movie file.
    In December I reinstalled my entire system software, logic, sample libs, etc. in the hopes of making logic more stable. I recently rebuilt my template from scratch with the same hopes. I haven't used logic on a project in about 3 months. I dont understand why I seem to have so many problems, as I've yet to have a problem-free project in all my time using Logic. (sad but true). Any ideas on why this is happening? Has anyone experienced this particular problem?
    I'm going to continue troubleshooting this problem (trashing audio prefs, etc.) Will post my findings. Thanks in advance for any insight you can provide.
    Message was edited by: Jonathan Timpe

    ok, I found the problem. I forgot in my new aggregate audio setup, one device only works at 44.1k, while the project is in 48k. Chalk this one up to user error. Logic, will you every forgive me! You know I still love you...right?
    Message was edited by: Jonathan Timpe

  • Logic will not open with out external soundcard after Mavericks upgrade

    Hi
    Recently upgraded my Mac to Mavericks and my Logic 9.1.8 (32 Bit) worked fine. I have a Digidesign 002 rack which I was using as an external soundcard. These all worked fine until I updated my Digi drivers. Now Logic will not open unless the Digi is connected, Logic has also been updated but still no joy. Logic freezes when opening on 'checking midi drivers...'
    Is there a preference I need to change or do I have to remain connected to my Digi forever?! lol
    Thanks
    Candy

    Remove the Digidesign Midi drivers.....
    Logic Pro 9 crashing at "Check MIDI Drivers."
    As you will see, this sort of problem with Avid/Digi Midi drivers has been around for a long time now.....

  • Logic will not open.  Getting stuck at DAE stage of opening application.

    I just bought Logic Pro and I installed it, making few preference settings during the initial installation. I've updated to 7.1.1 but Logic still quits "unexpectedly" when I try to open it. My TDM hardware initializes, and then...nothing. Any Ideas?

    Something to check out....
    Be sure that you do not also have CoreAudio active in Logic. You may have an issue with the native Logic engine using the Digi CoreAudio driver, while the DAE engine trys to take control of the same hardware.
    Start Logic like without DAE as the previous post suggested, and see if you have the CoreAudio driver active in the Logic preferences. If it is, deactivate it, or atleast change it to something besides the Digi hardware.
    Ideally you should have no more than 2 audio engines active in Logic at one time. CoreAudio + DAE, or DAE + DTDM, but not really all 3.
    Also, be sure that your version of Pro Tools software is compatible with your hardware, installed, up to date for it's version and working properly. Before Logic will ever work under DAE, Pro Tools must be setup and working correctly.
    Your post also states that you are on 10.4.4, which is not tested or supported by Digidesign. Compatibility is up to OSX version 10.4.3.
    G5 Dual 2.5   Mac OS X (10.4.3)  

  • Why have I lost a lot (if not all) presets / instruments on Logic Pro 9?

    Hello people.
    First thing is, I had logic on my previous mac (before i accidentally spilt water on it), and luckily the hard drive was unhurt and retrieved all data onto a new one, the thing is, since i have done this, the presets have been lost from plugins, such as Space Designer reverb, AVerb, EnVerb, SilverVerb. Such as, when I open an existing project where i've used a preset that is no longer there, it asks me to locate it:
    And also, I have several (IF NOT ALL) instruments that have been lost, no piano's or anything, and all projects where i've included them have all become the same instrument (like the EVP88 Electric Piano or something).
    Can anyone help me with this problem, what could I do to retrieve everything etc?
    Yes I have download the additional content that was available to me, and yes I have deleted it and re-installed from the App Store, no change.
    Kind Regards,
    Mitch Gardner

    How did you move the data from your old drive to your new one?
    If you used the Migration Assistant or Time Machine. that is likely why.. as many people have reported such issues after doing so.
    The only reliable method is to re format your new drive and start again from scratch but this time don't use MI or TM directly to restore from but instead download and install everything from new and then manually copy across your personal data and projects etc.... from your TM backups.
    You should be fine then... and yes, i know thats a pain to do but in the long term, it will save you a lot of headaches....

  • Can you tell me why none of my music will play I had a little box that came up saying all your items are ticked so they will not play on itunes what does this mean it's driving me nuts help!!!

    HI there can you tell me why none of my music will play on itunes it just displays a message saying it cannot be located please help it is driving me nuts
    Jan

    About 5 days ago for no apparent reason at all, about
    7000 songs which i have collected over a number of
    years has just decided that it wont play in ITUNES or
    in any other of my media players. When you click on
    Play over a song nothing happens. The play icon
    doesnt even come up on the screen.
    Steps I have taken so far are:
    1 - Remove all tracks from ITUNES and then re-add the
    folder where all the songs are. This has obviously
    removed all songs, but when I have re-added the
    folder , it has added about 650 tracks back on to the
    playlist. These 650 tracks will play. This leaves
    approx 6400 tracks that it wont play.
    By the way all the songs on my PC are MP3 type and I
    have had no problem playing any of them until last
    week.
    2 - I have re-installed ITUNES and reinstalled
    Quicktime and that has not worked.
    3 - All of my songs are backed up on to a External
    Hard Drive. I have tried to restore the songs and
    also play them directly from the external hard drive.
    I get the same problem when I do this.
    4 - I have enabled and allowed all permissions for
    the account that I am running the PC from.
    I am guessing there must be some settnig or Registry
    Key that is blocking me playing the tracks from the
    PC. I have also tried to launch the songs in Media
    Player and Sonic stage but thsi has not played
    either.
    All the tracks are in the folder structure as they
    were before so I know they are there. I just need to
    somehow unlock them.......
    If anyone has any ideas, I would be very grateful as
    I dont want to lose my entire music collection.
    Also I cannot find anyweher on here that is a Support
    number or email address for Apple as this is an
    ITUNES issue and they should be resolving it for
    me!!!!
    Thanks
    Dell   Windows XP
    Pro  

  • I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5.  Can this be overcome?

    I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5.  I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

    You can use printPages(1, 5), however I need to know how you print current page.

  • All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

    All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

    iTunes Store- Transferring purchases from iOS device or iPod to a computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    How to dowload purchased music

  • PLEASE HELP! - when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

    when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

Maybe you are looking for