Not allow order unit in INFO record if it is not in material master

Hello there!
In standar SAP any user can introduce any order unit in the info record, even if it is not maintained in the material master alternative units of meassure. We need to block this...
The conversion factor is not a problem for us, as we can set it only for display in the customizing, so that the systems brings it automatically from material master
The idea is to allow as order units only those units of meassure that exist in material master.
We have been checking if it is possible, but no success...
Any idea on how to get it? Error messages, user exists, or so on...
Thanks!!
César

Hey vmendoza7785,
Congratulations on getting your new iPhone. I'm sure it is frustrating not being able to do everything you want with it. Let's see if we can get your backup started.
If you are having an issue with being unable to make a backup of your iPhone with iTunes, I would suggest that you troubleshoot using the steps in this article -
If you can't back up or restore your iPhone, iPad, or iPod using iTunes - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Similar Messages

Conditions for each Order unit in Info record

Hi all
If I have an info record with the base UoM as NOS and Order Unit as EA, can I have different conditions for NOS and EA for the same info record? If yes, How should I create them?
Regards
Madhu

Hi
I think this help documentation is saying that you can maintain multiple ordering unit and can define condition for each of those different multiple ordering units.
You can't maintain condition for base unit of measure once you have ordering unit is different than the base unit of measure.
For example,
In info record you can give PB00 value and give the price and then in unit, you can maintain multiple ordering units. Depending on your ordering unit in PO, the price is picked up relevant to that ordering unit from info record. Similarly, you can maintain multiple conditions with different ordering untit by defining price per such different ordering units.
Regards,
Jagadeesh

Different order units in info records

Hi, I need to have different order units for different Plants in Info Records. I find this field only at general level. How can I solve this problem? Can anyone help me? Thanks. Marí

When you create the info you are creating for plant so you can enter different order unit in diff info as per the plant you select but suppose if you want to maintain more thna one order unit in the same info then you have to activate the variable order unit funcitonlity
to do that go to material masater purchiasing view and enter the 1 0r 2 based on you reqs
1- active
2- active with own price (means in the info record for all the order unit you can maintain the price
then maintain the diff order unit in mateirl master
within mateirl master Additionl data-unit of measure here you can enter
now when you go to info record you will see the variable orderunit filed is populate on general data screen if not populate and then populate.
if 2 is entered then when you click conditio it will popup for pricing

Min.order Qty from Info record in PR in MRP

Hi,
Is there any setting by which , while running MRP, system will take min.order quantity from info record (instead of material master) ?.
If not , then is there any way to achieve the same?

Hi Csaba Szommer
You are right, If you try to convent PR in to PO, and if you have maintained min.order qty in info record, you get message ( error / warning ) as per your message setting.
Your question is also valid that if the same material is being procured by many vendors, and each vendor might have different min. order qty, Hence it has to be picked from info record only.
But I have tried with all the possibilites. While converting PR into PO, based on system message you can correct the Quantity, but if MRP generates PR ,based on the min.order qty in info record, then no need to handle such messages.
You can try also, maintain different min. order qty in Material master and info record, it will always take from Material master and never from info record.
But Logically, it should take from info record.
That is why I wanted to make the system take info record min.order.qty.
So it would solve the problem if you know some setting that takes min.order.qty from info record.
( ref: I am aware of planned del. time , there is one checkbox in plant parametes, if you select that , system will take planned del.time from info record , if you don't, system will take it from material master. So if you know any such setting for min.order.qty, pls let me know. I could not find any such possibilities)
Thanks

Purchase info record and Contract are not reflected in SC

Hi...
while i am creating a shopping cart in SRM for a particular product... i am not able to find the Purchase info record or Contract in SC - Source of supply tab...
I maintained the Purchase info record and Contract for the particular material in Backend(4.7n).
Plz throw some lights on this...
thx....

Hi
if you are using classic scenario it might have dispalyed in SOS.
check info records/contracts are existed in backend for your product in srm?
is your cart is special request(describe requirement ) or internal goods and services?
if you are in ecs mode. it is not possible to see your inforecord/ backend contract in srm sos window
regards
muthu

'Minimum purchase order quantity' in info record doesn't work

Hi,
I've maintain the value of 'Minimum purchase order quantity' and 'Maxmum purchase order quantity' in info record via t-code: ME12, but it doesn't work. No any affection happened to the newly created PR.
Please kindly advise.
Best Regards.

Hello Rolf
The setting you are looking for is done in
SPRO --> Materials Management --> Purchasing --> Environment Data --> Define Attributes of System Messages --> System messages
Go to
Version                    00
Application Area       06
Message No            216
Make the Category to E - Error instead of W - Warning
Hope this is what you are looking for
Regards
Amit

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

My Ipod 4th generation is unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing.

My Ipod 4th generation is almost unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing. My ipod's power button, volume buttons, and home screen button all work, and I can still use my start/stop headphones to listen to music.How do I fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK.

My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?

My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?

Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call.

RESTRICT PURACHSE ORDER CREATION IF INFO RECORD IS NOT MAINTAIN

HI,
I WANT TO RESTRICT THE USER FROM CREATING PURCHASE ORDER (ME21) IF HE HAS NOT UPDATED THE INFO RECORD FOR THE SAME.
I WOULD LIKE TO KNOW WHAT ARE THE FIELDS EFFECTED FROM WHICH TABLE AND HOW TO DO IT.
WHAT I KNOW IS INFO RECORD (ME11) AFFECTS EINA TABLE, BUT HOW TO RELATE THIS WITH P.O .
PLEASE HELP ME.
THANKS.

Thanks

Avoid Purchase Order without Quality info Record

Hi All,
I am facing the problem, i.e i want to avoid creating purchase order if the quality info record is not maintained.
Can we do it ?????, If yes please suggest me how to go about it & what are the control points for the same.
Please reply ASAP.
Arun

Hi
In material master If u activate QM proc key.And enter a valid Control key like 0001.system will not allow u to create PO without Info record(QI01).
If any queries let me know.
Gopi

Is functionality lost by not using 'contract', but instead info records?

My company is going through a data cleansing, and we would like to prioritize info records. What's the benefit of using "contract" over "info record" and vice versa? Do we lose functionality by dismissing contract completely? (Certainly, we would have contracts, but the legal agreement would be handled externally.)

Hi,
PIR Serves as a source of information for Purchasing. It contains information on a specific material and a vendor supplying the material. For example, the vendor's current pricing is stored in the info record.
The info record allows buyers to quickly determine:
Which materials have been previously offered or supplied by a specific vendor
Which vendors have offered or supplied a specific material
A contract is a type of outline purchase agreement against which release orders (releases) can be issued for agreed materials or services as and when required during a certain overall time-frame.
Contracts are of two types:
1. Quantity contracts - Use this type of contract if the total quantity to be ordered during the validity period of the contract is
known in advance.
2. Value contracts - Use this type of contract if the total value of all release orders issued against the contract is not to exceed a certain predefined value.
Thanks
Chandru

Free goods not reflecting in PO from Info Record

Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
Uts

HI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM

CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

Not allow order unit in INFO record if it is not in material master

Similar Messages

Maybe you are looking for