Not allow simultaneous login on managed computers using profile mangaer

Does any one knows how to not allow simultaneous login on managed computers using Profile Manager instead of Workgroup Manager?
Thanks in advanced

Hi Folks
First - thanks for your help.
Closing this out - here is what I learned:
1) Needed to ensure my server was Kerberised and that Kerebos was running correctly
2) Local users have precedence over network so I need to ensure I don't use the same short name. While using the "id" command you may be able to see the network user ID, the local of the same name appears to take precedence.
3) Using the "kinit" command useful for confirming Kerebos is working correctly
4) Home directories created - had already done this but what finally got this working was stopping and restarting AFP Service.
So was able to successfully login to Mac Client using OD username and password - it mounted the network home share just fine on the client, loaded preferences etc.
Now on to create network users with Mobile Accounts for my laptop users - wish me luck

Similar Messages

I was charged no my credit card for the app store and i am not able to login, i tried to use the forget password options but it isnt going through

i was charged no my credit card for the app store registeration and i am not able to login, i tried to use the forget password options but it isnt going through
Apple id : [email protected]

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a problem with this version?

Question
When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a proble

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

You cannot transfer from the iPhone to the computer.
You must move the contents of your old computer to the new one directly.
Use an external hard drive perhaps or restore your old computer backup to your new computer.
The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

My apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

my apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.

After Effects - Multiprocessing not allowed even when a Proxy is used?

Hi everybody!
          I have a composition (Comp1) that uses an effect which doesn't allow multiprocessing (e.g., Lens Blur) -- this I understand.
          Comp1 is used inside of Comp2. When I pre-render Comp1 and use that render as a proxy for Comp1 inside of Comp2, I still can't use multiprocessing. This is the confusing bit. I'd think since the Lens Blur effect isn't actually being rendered, it shouldn't give me any guff.
          Alas, it does. Anyone else run into this? Is there a workaround, or is it a bug/oversight by our friends at Adobe?
          Thanks in advance as always -- this forum is a great resource!

Hi Dave,
I appreciate your help, but I think I'm still missing something. When I set a proxy movie for my Comp1, come render time, it should never look inside Comp1 at all — it should just use the proxy movie. The LensBlur effect is not applied to Comp1 itself, it's used INSIDE Comp1.
To what end would AE look inside the real Comp1 when it's been assigned a proxy movie?
--Rob
Rob LaRose systems administrator
imaginary forces | 530 west 25th st | new york city | p 646.486.6868 | f 646.486.4700 | www.imaginaryforces.com
From: Dave LaRonde <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 4 May 2011 16:20:44 -0400
To: Rob LaRose <[email protected]<mailto:[email protected]>>
Subject: After Effects - Multiprocessing not allowed even when a Proxy is used?
Typically, a proxy is a low-resolution substitute for the real image to make AE work a little faster, right? When AE renders, it doesn't render the proxy, it uses the high-resolution real image, right? The same thing is happening in your project.
If it doesn't impact your work to use a lower-resolution substitute for your comp 1, I'd suggest not using the substitute as a proxy.
If full resolution matters, make a full-resolution prerender.

I am not able to login to i cloud using my apple id

I am not able to login to i cloud using my apple id.

That's too bad. Try entering the correct login credentials.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

I also have problems with Facebook on my iPad 2. I don't do a lot with Facebook and generally only post on my feed page. Sometimes hitting return on the keyboard enters the comment, sometimes not. Sometimes the comment will show on my iPad but if I revisit that page I find that the comment has disappeared. So I'd say that Facebook and my iPad are not totally compatible with each other.
I looked into Friendly and was about to purchase this free ap. But before I did I went to the Friendly web page for more info. There I found a page with users comments. One after another users complained about bugs with Friendly. The developers claimed a fix was coming but the user comments complained about the lack of response and support. One of the fixes suggested by the developers was to log out of Friendly then log back in. One user complained that doing this three times in ten minutes was not very helpful. Because of this I decided to avoid Friendly.
I did find a Facebook developed ap but it was for the iPhone. I presume that iPhone aps will work on the iPad but I'll wait until Facebook releases an iPad compatible ap. If there is an ap developed by Facebook for the iPad that I missed please let me know.

Not able to connect with managed server using ssl connection

Hi Guys,
My weblogic server is running on linux. I have setup ssl connction bu using Demo Identity and Demo Trust.In server logs i can find the following infomation that server is running on secure port.
But once i try connect to managed server using client i m facing below error:
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:767)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:684)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:307)
     at javax.naming.InitialContext.init(InitialContext.java:242)
     at javax.naming.InitialContext.<init>(InitialContext.java:216)
     at com.akt.client.WLCLIENT.makeConnection(WLCLIENT.java:40)
     at com.akt.client.WLCLIENT.main(WLCLIENT.java:60)
Caused by: java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:165)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
     ... 9 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:260)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
     ... 15 more
But in server logs i can see below message
opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoIdentity.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoTrust.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.7.0_21/jre/lib/security/cacerts.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on hostname:port for protocols iiops, t3s, ldaps, https.>
<May 27, 2013 2:47:06 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started the WebLogic Server Managed Server "Server-Test" for domain "base_domain" running in development mode.>
Please suggest
Edited by: 1008140 on May 27, 2013 2:37 AM

Welcome to OTN
This section related to Database question not fusion middle ware Post your question
Oracle Discussion Forums » Fusion Middleware

TS3212 im trying to reinstall but will not allow, due to an error 7, itunes helper not installed correctly,i have tried several times, but will not allow me to install, i have used itunes for years but now cant use it, can you help

i have tried to reinstall itunes because it is saying i cant use my itunes due to an error 7, itunes helper not installed correctly, please reinstall, i have tried several times but still not allowing me to use, ive never had this problem before in all the years i have used itunes, i have gone through all the troubleshooting but still no access, can you help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

User is not able to Login from external supplier, using the WSS (ICH)

Hi Gurus,
The user is not able to login to the server externally from url.
dev_icm is giving below warnings:
[Thr 11052] IcmWatchDogThread: watchdog started
[Thr 11309] ** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set => do
not trust any intermediary*
X.509 cert data will be removed from header [http_plg_mt. 720]
[Thr 11309] =================================================
[Thr 11309] = SSL Initialization on IBM RS/6000 with AIX
[Thr 11309] =   (700_REL,May 3 2008,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 11309]   profile param "ssl/ssl_lib" = "/usr/sap/SCA/SYS/exe/run/libsapcrypto.o"
           resulting Filename = "/usr/sap/SCA/SYS/exe/run/libsapcrypto.o"
[Thr 11309] =   found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
[Thr 11309] =   current UserID: "scaadm", env-var USER="scaadm"
[Thr 11309] =   using SECUDIR=/usr/sap/SCA/DVEBMGS41/sec
[Thr 11309] = secudessl_Create_SSL_CTX(): PSE "/usr/sap/SCA/DVEBMGS41/sec/SAPSSLA.pse" not found,
[Thr 11309] =      using PSE "/usr/sap/SCA/DVEBMGS41/sec/SAPSSLC.pse" as fallback
[Thr 11309] = Success -- SapCryptoLib SSL ready!
[Thr 11309] =================================================
HTTPS (SSL) settings are as below, i think which means that no ssl certifiacts are required.
icm/HTTPS/verify_client        = 0
Kindly help urgently.
regards,
MJ

this is SCM system.
SSL CA's are set.
what should be value of the parameters?
icm/HTTPS/trust_ client_with_ issuer or
icm/HTTPS/trust_ client_with_ subject
http and https ssl conections are correctly set.
I think the SAPSSLA. pse" not found, is not the problem as the parameter icm/HTTPS/verify_ client = 0 is set, it means that no ssl certifiacts are required.
problem is coming when the system is being accessed from externally using other secure domain name.
the system is being accessed ok from web urs which is internal, but not external.
for example in strust tcode the domain name is *abc.com, which is running fine when accessing the system internally.
but when the user is accessing this sytem from other secure login from *xyz.com, which is also the same companys domain, then the user not able to login, its showing errir.

Creation of backup DVD's since you will not allow the installation DVD to be used.

I now understand that you refuse to let me use the installation /back up DVD as an installation / back up DVD and insist that I make my own back up DVD’s. I have gone through the usual nightmare trying to find your instructions and can find none.
How do I go through the excess steps to create back up DVD’s for Photoshop Elements and Premier Elements that you will not allow the installation/backup DVD to be used for?
I bought DVD's to be spared this nightmare.

The chat folks got the Premiere Elements installed with a herculean effort including downloading off the Internet. The Photoshop Elements installed fine.
My request was based on the legal agreement. It read to me like I had to save the application from the hard drive to a DVD to get a back up copy made and that that was the only way I was allowed to do it.
The chat folks, based on the severe problem I had installing Premiere, are mailing me a replacement DVD to use as a backup which is the sort of media I would expect. I guess the legal language as I read it deviates from the normal situation.
Thank you for the follow up.
Robert J. La Trémouille
875 Massachusetts Avenue, #31
Cambridge, MA 02139-3070
617-283-7649 / 617-491-7181
Facebook: Friend the Charles River White Geese on their facebook page.Visit our blog: http://charlesriverwhitegeeseblog.blogspot.com
Visit our website: http://www.charlesriverwhitegeese.org
Watch The Cambridge Environment on local cable in Cambridge, MA
Cable Channel 9, Sundays at 6:30 pm, now in its 17th year.

Will not allow images on websites that it used to allow, for example, when trying to post on Craiglist, it will not show the images I have to copy in order for CL to approve my post

will not allow certain images - for example, cannot see the images I need to copy on Craigslist in order for CL to approve my post.
== This happened ==
Every time Firefox opened
== we moved the computer and reconnected it

Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
See [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

Safari 8.0 not allowing Sharepoint Login / IIS Authentication

I recently upgrade to Yosemite with Safari 8.0, but now I'm unable to authenticate and connect to our sharepoint server. I seem to be able to login to my iMac using my Active Directory credentials and normally that would prevent me from meeting to login to Sharepoint.
Instead, now I'm shown the Sharepoint login box, but no matter how I enter my credentials (with or without our domain name) it just displays the login screen again and again and I can't navigate away from that tab unless I force shut down Safari.
I tried Preferences > Security > [Uncheck] Warn me when visiting a fraudulent site based on comments on a different tread topic and that seemed to work for one browsing session, but now I'm back to where I began.
PLEASE HELP! I really need into sharepoint via Safari.
We are running Sharepoint 2010

This isn't a Mac / Apple problem. It's a .NET problem (which uses User Agent sniffing to customize certain controls as they are output, including navigation menus on SharePoint)
I wrote a blog post which includes the fix you need your SharePoint administrators to use: Did Safari or IOS 8 break your SharePoint 2010 site?

Design console is not allowing to login!!

Hi,
I am using OIM9101/jboss-4.2.3, I am able to use webconsole but when I use design console it doesnt allow me to login and gives the following error
==
Exception in thread "main" java.lang.NoSuchFieldError: TRACE
at org.jboss.logging.Log4jLoggerPlugin.isTraceEnabled(Log4jLoggerPlugin.
java:85)
at org.jboss.logging.Logger.isTraceEnabled(Logger.java:122)
at org.jnp.interfaces.NamingContext.discoverServer(NamingContext.java:13
10)
at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1548)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:634)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:627)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at com.thortech.xl.client.base.tcAppWindow.internalLogin(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.login(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.<init>(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.main(Unknown Source)
==
I tried to replace jboss/log4j.jar to client/ext/log4j-1.2.8.jar but it didnt help.
Any one has solution for this?
Thanks,
Oleti

Did you provided correct connection parameters while installing ?
Go to [Installed Location]\xlclient\Config and edit xlconfig.xml for correct connection parameters. Check the discovery tag whether the connection parameters are valid.
<Discovery>
          <CoreServer>
               <java.naming.provider.url>t3://youroimserver.domain.com:XXXX</java.naming.provider.url>
               <java.naming.factory.initial>weblogic.jndi.WLInitialContextFactory</java.naming.factory.initial>
          </CoreServer>
</Discovery>

Not allow simultaneous login on managed computers using profile mangaer

Similar Messages

Maybe you are looking for