Not allow to amendment in PO after making GRR

Dear All,
I want to know from where we restrict the amendment in PO after making GRR.
Abhinay Sachan

Dear ,
Your solution is very appreciable but ..
1 - but we want to allow change before GRR so we can't withdrawn authorization of ME22N.
2- How to check complete delivery indicator automatic?
Abhinay

Similar Messages

Any method not allow to change PO price after do the GR

hi,
Any method not allow to change PO price after GR had done. Thanks

Hi jo jo,
To disallow any price changes, set the Tolerance Key limits for Price Variance (PE-Price Var in Purchasing) for PO in IMG to Zero. This will compare the new price (Effective Price w/ Cash Disc) to the material price in the Material Master. Also set the msg no. 207 (in App Area 06) as a "E"-error message. This will stop end users from making changes.
If the Tolerance limits are set to zero and the message 207 is set as E, it should work.
Let me know if this was helpful.

Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition

Hi, when I tried to create a new 1GB partition (on my Mac mini 2011, using Mac OS X 10.7.3) and then to delete it I could not restore (increase) Macintosh HD size using Disk utility (diskutil list shows the same value for Macitosh HD (498,17GB) partition before and after I deleted a new created 1GB partition).
Please help, how I can restore the original size of Macintosh HD when Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition?
Thank you.

The bottom right corner dragging does not help in my case, because it shows that Macintosh HD partition size is maximal, but its real size did not change after I removed 1GB partition.
Maybe any other idea can help me, for example some built-in tool like diskutil which allows to view and manage unused partitions in terminal?
Thank you.

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

That is not normal behaviour, for possible causes see [[Firefox has just updated tab shows each time you start Firefox]].

Not allowing changes to payment terms after the AR document is released to accounting

Hi,
Anyone know the best way to not allow a user to change the payment terms after the AR document has been created in AR? This is affecting aging because users are changing the payment terms without permission. What is the best way to control that?
Thank you.
AK

Hi A K
Frequent change in payment terms is something business should introspect. Payment term is decided and agreed upon with customer/vendor during the initial stages.
However from IT perspective, it can be controlled keeping some system controls.
1. Limit the Customer master change transaction to very limited users or to a manager. There should be internal approvals by management for business to make a change. Bring this into force.
2. Regularly run the customer master change reports and provide the trend to management to restrict or limit the changes.
3. Use Change Message control for master data by providing necessary warnings or error messages when master data is changed.
4. In the sales order level, there is every possibility to change the payment term. Based on the user authorization get the payment term field greyed out and provide change access to accounting or to a specific user upon approvals. This is a bit complex process but I feel this brings up controls and stops the process from exploitation.
5. Also activate 'Sensitive fields' KNB1-ZTERM for payment term field in customer master. This brings up another layer of confirmation of change by other users.
6. Another back route, not recommended in all cases, is to subsititute the required payment term during accounting document posting.
Hope it helps.
Thanks,
Sekhar

The enter button or tapping the keypad will not allow a search to occur after I type in a keyword????

Firefox will not allow me to use the enter button or even tapping the key pad on the go/magnifying glass button in the search window. I can type in a few keywords in the google or yahoo keyword search window in the top right tool bar but it will not let me enter. It also will not let me search or enter on any website with a search window. I can't even type in a username/password to access my banking. This just occurred several days ago. This is a linux Acer 8gig netbook.
== This happened ==
Every time Firefox opened
== A few days ago.

This may or may not be the problem but clips need to be in a storyline, not just butted back to back, to apply transitions. Meaning if you lift clips form the main storyline and just have them back to back on the line above (but not in their own storyline) they will not allow effects to be applied. You need to either move them back to the main storyline, or create a new storyline containing the clips, and then apply the transition.

Do not allow change of Reference Object after Order release

Dear All,
The requirement is that we should lock(not able to change) the Reference Object after the Maintenance Order is released. Can we acheive this in standard way or do we need to go for development.
If going for development what should be the basic logic.
Regards,
MLN Prasad

Prasad,
You are accomplishing the same utilizing the built in enhancement framework([Implicit enhancements|http://help.sap.com/saphelp_nw70/helpdata/en/70/63da4023a28631e10000000a1550b0/frameset.htm]), WITHOUT making a MODIFICATION to the system. This technology / functionality is available from ECC 6.0 . You would need to be very careful in using the implicit enhancement functionality so that you don't break the flow. Your requirement seems to be a simple one which could be accomplished by tweaking the screen attributes of the field under certain conditions, for this specific screen in the program. You may also have to make the Priority field a display only, so that it doesn't trigger a change through it via the user exit or through standard.
Regards
Narasimhan

Can not access Viber messages, photos & videos after making restore from iTunes backup

Hello Viber Team,
I have sent several help requests about my Viber issue but I did not receive any reply from anyone at viber's support team.
It's highly seems the new viber app v5.1 which released on November 18, 2014 for iOS devices has a bug which deletes all messages and call logs once the app is updated to the new version. Because it requires for re-activation of already active viber account (as a new user) which causes this issue.
As mentioned in viber website, the only effective method to restore in-app viber data is to restore from either iCloud or iTunes backup. I've tried both methods while I had backup from my viber messages in both backups. But after iphone is restored the app, on the first attempt to open the viber app, it crashes and deletes all messages and a popup window appears which asks for re-activation (while the account has already been actived) and I did NOT deactivated or NOT deleted before doing restore).
I have also reviewed the other people's feedbacks in AppStore and it seems that I'm not the only person encountering with this technical issue. I'm using iPhone 5S with iOS 7.1.2 and tried at least 10 times to retrieve my viber messages by backup restore, and not sure if the device's 64bit SoC has anything to cause this problem.
Please inform me to find a solution for this disaster issue, or at least let me know if you're acknowledged and are analyzing the issue to provide a fix in your next update.
Thank you.

First, restoring from a backup you made AFTER messing with restrictions isn;t going to help you. Doing so will put the problem right back on your phone. So unless you have an earlier backup - you may not - you will have to restore as a new device.
Second, don't know where you buy your cables but an Apple lightning cable is $19 direct from Apple. Sometimes they're cheaper if you buy from Amazon or other online retailers. And even less if you buy a reputable third-party cable (never buy off brand!).
finally, a new cable does not necessarily mean it works, though that would be unusual. First try resetting your iPhone. This will work even if it's in recovery mode. Simultaneously press and hold the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If that works, your good to go. If not, report back. But again, remember, restoring that backup will place the restrictions back on your iPhone.

Not allowed to transfer music tracks after Comes w...

I've been informed by Nokia that once your comes with music subscription has ended you are no longer allowed to transfer your music to your mobile device, even though in there terms and conditions it says you can even change your mobile device after the service period for a period of two years and transfer the music what is going on ?

Yeah, having to pay for re-downloads was kind of the last nail.
I just spoke with the Nokia Care people here in Sweden though, and - interestingly - these people claim that transfer between PC and phone should be possible after the subscription runs out. There's a slight "however" though - it seems this transfer is only possible "up to two years" after the subscription ends? The same as re-downloading of the tracks.
I imagine that if they (hah, fat chance) manage to sort out this CMW-MU migration thing, and it's possible to both transfer and re-download tracks again, you need to transfer all the songs you've downloaded to the phone in order to update the DRM license. Because, and this is interesting, all the songs I've had in my phone at some point (but since removed) can be transferred back to it. The problem is only in transferring songs that I've downloaded to my PC but never transferred to the phone before they made the switch from CMW to Music Unlimited.
This would suggest they have severe problems with their DRM licenses... (among other things)
"If the truth can be told so as to be understood, it will be believed."
-Terence McKenna

System not allow to change PR QTY after create PO

Dear Experts,
I have one scenario after create RFQ & PO no body can change the PR qty.
How can i restrict please guide me.
Regards
Aamir

Use BADI :ME_PROCESS_REQ_CUST
Here with the help of the ABAP person write a code like while saving the PR in me52n system will check in the background if there is any entry against filed EBAN-EBELN...if found then system will throw a customized error.
you can also try out by making message 06-152 as error message.
Regards,
Indranil

Quick time Pro does not allow me to download files after unlocked.

In a website there are some audios in QT that I want to download. I right clicked and it gave me the option to download them. After a new screen apperared inviting me to purchase QT Pro. I did it and got the registration code to unlock Pro features.
Well, now I go to the same website and right clicking on the objects does not work anymore, hence I can not download anything and I just purchased the license to do it.
Windows Vista.
Regards,
Juan

I think I killed myself. In the QT preferences I had choose Enable kiosk mode in the browser tab, which disables the option to save movies and change preferences from within the browser.
Now I have another problem, but I will open another ticket. I download, but it only downloads 1K files, but not the whole contents.
Thanks, Juan

DRm 11.1.2.103: Howto: Not allowed to change property value after value set

Tips on how to ensure this?
I would appreciate help on solving the following request: a property must be set by a user (ex property 'Entitytype' of a Unit node). However as soon as the property has been defined (value of property is not blank) this cannot be overridden again (example; if Unit node is set to COMPANY it cannot be set to DEPARTMENT, but the property value must be allowed to be set in the first place and overridden if blank only) Also remove value of this property should not be allowed if value is not blank or 'nothing. I assume this must be a common request, but I cannot get my head around how to solve this in DRM since DRM does not have a way to check the 'previous value' of a propery when validating (as far as I know)

Hi,
Try this
1. Create a derived property e.g. Can_Change with a formula like this
Equals(Date,Now(),AddedOn()) --depending on your requirement you may either use AddedOn() or ChangedOn()
This will return True of the system date and create date are same. which mean user should be able to change the value for the first time.
Now create a real-time validation based on the above property to stop the user from changing the value.
hope this helps.
SJ

Data Execution Prevention (DEP) has not allowed firefox to start, even after reinstalling firefox

Firefox will not start. Windows message tells me Data Execution Prevention (DEP)has prevented this program from starting. Help says: If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

Photoshop Elements 11 will not allow me to open files after I updated my operating system

I recently updated my operating system with the latest upates. Now, I when I got into Elements and I try to open a file, the window where you normally click the file disappears before I can click anything. Then I have to force quit because everything is grayed out and I can't click anything. I have contacted adobe support but they said it is most likely a mac problem becuase the program works fine when I log into another user account. They said to contact Macsupport to check the permission for Adobe products on the current user acount. Also, some people suggested to turn off the active corners, but that didn't work. Anyone else have a suggestion?

Sarah
I am having the same issue and all since I updated to the Maverick OS (well it seems that way anyway). I am currently going through the process of repairing permissions, removing other pieces of 'non standard' software on the Mac, uninstalling Elements 11, doing a safe boot and then a download of the package again and trying a completley new install. If this doesn't work it will be a fresh user account and start again.
There were some very helpful hints from folks about remmoving other unnecessary software which did help stablise other issues but I still cannot get Element to work.
You could have alook at these links to see if anything helps with your issues - the last one seems most relevant;
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-errors-freezes-install -photoshop.html
https://discussions.apple.com/message/23903833#23903833
http://feedback.photoshop.com/photoshop_family/topics/photoshop_elements_11_fail ing_on_imac_after_upgrading_to_os_x_mavericks
Good luck and let me know how you get on.
G

Safari extension not allowing me to manually update, after telling me update is available.

hi , im running safari 6.0 & in my "Safari extensions prefrence window", there is an update available for one of my extensions.
i've chosen to have "Install updates Automatically" un-checked, for i wish to do this manually.
However when i click on "Install All Updates" nothing happens. Same with clicking on the "Install" tab that is next to the
extension icon in the update window . Finally when try checking "Install Update Automatically" that seems to start the updating process (& completes) but nothing is installed. Anybody have the same problem?
New @ this, hope i'm being clear... & thanks in advance!

IMO, The last part of your post is very confusing due to a lack of properly placed punctuation. If I am understanding it correctly, yes you have to let the backup finish downloading everything g before you can update the device.

Not allow to amendment in PO after making GRR

Similar Messages

Maybe you are looking for