Not allow to create delivery note if not enough stock

Hi
is it possilbe not allow to create delivery note if not enough stock? how can i do it
thanks

In case of partial delivery, it allows creation of delivery and PGI only for the quantity of the material which is available in unrestricted stock.
If it is complete delivery and if the stock is not available, it tells you the log saying that only X quantities of delivery is possible and it will ask you to enter the quantity you want to deliver. But as ur sales doc is marked for complete delivery, delivery wont be possible for this.
In nutshell, if you want to deliver the quantity which is more than the available quantity in stock, delivery creation wont be possible.(Tested and confirmed)
Rwd if this helps
Message was edited by:
Navaneetha Krishnan

Similar Messages

Trying to post a question and receiving: You are not allowed to create or update this content

I am a newbie and am trying to post a question to the support communities and received this reply:"You are not allowed to create or update this content"
My question:
Help! Not all my incoming mail messages are going to my home computer account. Some are derailed and end up in my inbox on my iphone only. My husband is waiting for a message to come through on the home computer and sometimes they end up on my iphone5 accounts. Yikes! He is not happy. Some messages come to my pc email and some only to my phone. But then, some come to both as they should. I need all mail to arrive at both home and on my iphone. I would so appreciate any help or advice given. Thank you! Iphone 5c IOS 7.1.2

I'm not sure, but you might try this (instructions are from my 5s running iOS 7.1.2):
On your iPhone, go to Settings -> Mail, Contacts, Calendars
Find the account you're having the problem with
Touch the arrow to the right of it, which will bring up a screen that has the account name, Mail and Notes
Touch the account name. This brings up a settings screen for only that account.
Go down to Advanced and touch that
See what it says under Deleted Messages. If Remove is set to something really short, your iPhone might be deleting the messages before they have a chance to download onto another device.

Creating of Patient - Dump - Not allow to create the Patient

Hello
For the Generic Search while creating the Patient -
Dump is creating ISH_BAPI_FILL_RETURN_PARAM_NOT FOUND...
Is it the Patches Updated issue?
Or the configuration Issue please?
we are still not able to finding out the reasons - why it causes the system dump?
Not allowing to create the Patient
Edited by: Raja Ram sunku on Jun 6, 2011 8:02 PM

Hi Raja,
Please provide the BAPI details and possibly your code to the BAPI.
Thanks and Best Regards,
Dinesh.

Why do I get the message You are not allowed to create or update this content

Why do I get the message You are not allowed to create or update this content/

Well, maybe we also need a "smart" answer. You've provided zero information from which you expect us to provide an answer? Maybe had too much weed today, Bob?

HT1222 my ipad will not allow me in. it is not accepting my password

My ipad will not allow me in. It is not accepting my password and keeps locking up the screen...help !!!!

Wrong/Forgotten passcode:
http://support.apple.com/kb/HT1212

Delivery is invoiced fully so system should not allow to create 2nd invoic

hi Expert,
my issue is, once invoice is created for delivery.
system should not allow user to create
second invoice for same delivery number.
where to check the confiurtion to stop such
behaviour
waiting for your reply
thanks
Alicia

Hi Alicia
In the copy control from delivery to invoice - T code VTFL
you can maintain the copy routines. try maintaining routine
3-- which is delivery reatled header
4-- which is delivery related item
also at item level copy control you may add the check in billign quantites
this would stop formc reating another invocie
Hope this helps
Thanks
Akasha

Packing is not allowed for inbound Delivery

Hi guys
I was trying to pack the delivery item in inbound delivery with Pack function in delivery object before posting GR against Inbound Delivery. Though I have maintained customizing settings like this Inbound Delivery category ( ELN) is relavant for packing control. and created a packing material master record with packing material type and packing material group.
Here i am showing the screen shot with msg when I execute pack function in inbound Delivery object.
( Remember SLoc is WM Enabled...If I try to create a TO ....i am able to create against Inbound Delivery but not allowing me to pack)
Appreciate your inputs on this ..
( See attached link)

Hi,
I cannot see the attached link and I don't think it it is necessary.
It would be better if you described your process step-by-step (very shortly and clearly), and if you posted the exact error message with its ID (provided you have error message).
Thanks,
Csaba

Batch not updating while creating delivery using bapi

Hi
I have used following bapi to create delivery BAPI_DELIVERYPROCESSING_EXEC and passed the following parameters into bapi
lt_request-document_type = 'A'.
        lt_request-document_numb = deltab-vbeln.
        lt_request-document_item = deltab-posnr.
        lt_request-batch        = deltab-charg.
        lt_request-material = deltab-matnr.
        lt_request-plant = '3200'.
        lt_request-quantity_base__uom = deltab-kwmeng.
        lt_request-delivery_date = sy-datum.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
DELIVERY_EXTEND =
TECHN_CONTROL =
      TABLES
      request = lt_request
      createditems = lt_createditems
      return = lt_return.
here i am able to create delivery successfully but the batch which i passed in bapi is not getting updated in vl02n to do PGI.
again i need to go to vl02n and give batch and quanitty manually to do PGI.is there anyway that batch gets updated in vl02n also.
Regards,
Venkat.

Hi
My answer is pure assumption.
Please check the following OSS notes
Note 758810 - BAPI_PO_CHANGE vendor batch and batch not visible
Note 1230268 - Field Vendor Batch never filled for PO BAPIs
Please take help from BASIS and SAP, before implementing the OSS note
Regards
Madhan D

Fiscal year 2010 Not allowed while creating Process order in COR1

Dear Friends,
We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating the Controlling document and Profit center document without any problem.
We have also made the period open as 2011 in MMpv and MMRV. The goods receipts is working fine and the finance entry and material document gets generated for the fiscal year 2011.
Now we are creating the process order in COR1 and getting the error message Fiscal year 2010 not allowed as below.
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
In KP26 we have maintianed for activity price for 2010 & 2011 and the system is picking the data for the fiscal year 2010 data and not the FY 2011 data.
I have checked in OKEQ (Costing version '0') The valide start date for FY2011 is 01.04.2010.
Is there any other place to maintain the fiscal year in Controlling area or Prodduction Planning???
I last my patient last 5 days doing R&D. Can any one help me where the fiscal year is picking and why it is picking FY 2010??
Regards,
Devendran

Hi Ajay,
Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011?? Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
Your inputs will defenitely help me to get an clue.
Regards,
Devendran

Fiscal Year Not allowed while creating the Process order (COR1)

Hi Friends,
My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
The Diagnosis shows as below
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
Can any one help me where the setting is missing or what whould be the probable reason for this issue.
Regards,
Deva

Hi Prakash,
Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
Is there any other probablity the date is picking from any Production related set ups??
The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
Is there any other possibility of the missing settings or problem in date control???
Regards,
Deva

Virtual column not allowed while creating "simple view"

hi,
i have created a simple view
systax:
create view empvu30
as select empno id_number,ename Name,sal*12 ANN_SALARY
from emp where deptno=30;
when i am going to update this view i am getting error:
ORA-01733: virtual column not allowed here

user10492712 wrote:
hi,
i have created a simple view
systax:
create view empvu30
as select empno id_number,ename Name,sal*12 ANN_SALARY
from emp where deptno=30;
when i am going to update this view i am getting error:
ORA-01733: virtual column not allowed hereThe error is correct as you have a transformation done on the Sal column which can't be updated. That's why the error is thrown to you.
Please read this link,
http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/views001.htm#i1006127
>
If the view was created by using an expression, such as DECODE(deptno, 10, "SALES", ...), then rows cannot be inserted into or updated in the base table using the view.>
HTH
@Pavan,
That's different question altogether. I don't think OP question falls in that thread's context.
Aman....

Create delivery by time, not day

hi
is it possible to create delivery by time (each hour), not by day
Pls advice. thanks

Hi Jo Jo
As already told,
Create a variant for the delivery due list in VL04, give the necessary input and save it as a variant
Now go to SM36 and just click the job wizard, it will guide you through the rest of the steps.
1. Enter the job name and target server(you can leave it blank if you want the program to be executed in the same client) and click Continue
2.In the next screen click the ABAP Program step and then continue
3. Enter the program name(p.name of tcode VL04 which you can find in the menu System----Status) and the variant you have saved
4. If you also want to print and spool click the print and spool parameters and maintain them
5. Skip add additional steps(This is needed only if you want to give some conditions, or run this job after some other job... etc)
6. In the next screen click Date and time and continue, now enter the start date and time and also click the period job checkbox and continue
7. Now in the resultant screen you can mention it as hourly job, or daily, weekly and so on, If none of them suit ur condition you can click none of these and ti will give you a new screen to give your own selectives
8. Once the time is given, it will give you the option to complete the job, Now click the complete button and now the job gets scheduled and every X hours as per your settings, the job will be executed.
You can reward me if this helped you

Why I'm not allowed to create post in support of apple online?

Trying to post a question, but seeing a message that I'm not allowed to do that, Why?
Thanks

You seem to have sucessfully posted here today:
How to delete "Other" data on MacBok Air?
Are you trying to make a different post?
Understand the forums have been ill-behaved for several months since the major format change and we all see spurious error warnings and occasional failures to post. Sometimes you have to wait a few minutes and try again.

Not allowing to create wbs element

Hi Experts,
It would be really kind of you to Help me out of the situation,
Iam trying to Add one more wbs element .The system was throwing error.
and Iwant to consider activity dates at the time of caliculating wbs date How to do this.
Thanks
Athidi.

Hi Dear ,
Iam getting Error::
"Several WBS elements on level 1 not allowed
you cannot save the wbs if there are several wbs elements at level 1."
Thanks,
Atidi

I am not allowed to create or alter content

When I tried to enter this discussion I received a message that I am not allowed to enter or alter this content. What does that mean?
Why does calendar delete my events without my instruction? When a make an event in my calendar on the iPhone, the next time I look for it it has disappeared. And it is not duplicated on my other devices - iPad and Macbook - via iCloud as it should be. As I understand iCloud, everything should be cross-duplicated between all connected devices. They do not. Can anyone answer my problem? All devices are running latest versions of respective software.

Since I'm obviously able to post into already existing discussions (but get the originally reported error when trying to start a new discussion), perhaps someone who can start new discussions would be kind enough to start one for me (to which I'd add further comments)? If so, the subject would be "Prevent screen lock for ipad 7.1.2". It would be for product="iPad 2", os="iOS 7.1.2". If you file a put a link here, that could be a horrible workaround...

Not allow to create delivery note if not enough stock

Similar Messages

Maybe you are looking for