Not allow to install AE & Pr on Leopard?

Hi All,
I am using OSX Leopard 10.5.8 right now. Yesterday I tried to install Adobe CS5 Master Collection, and I found that I couldn't install Adobe After Effects CS5 and Adobe Premiere Pro CS5 (which are both 64-bit based) (The main installer hid the options of AE and Pr) . I checked the system requirements again, and it showed that there shouldn't be a problem to install these programs on Leopard.
Can anyone help me to solve this problem? Please please please!
Valent

AMD Phenom(tm) II X4 945 Processor4 GB DDR2 - 800ATI Radeon HD 4870 1024 MB1920x1080x32
Date: Mon, 3 May 2010 04:09:29 -0600
From: [email protected]
To: [email protected]
Subject: Not allow to install AE & Pr on Leopard?
Please provide ALL available info about your hardware: processor, RAM, video card, display resolution etc.
>

Similar Messages

Safari does not allow to install USB drivers downloaded from certain websites

Safari does not allow to install USB drivers from http://www.flymaster.net/Products/LIVE/tabid/143/Default.aspx
I don't know what to do to allow downloads from www.flymaster.net to be installed.

Welcome to Apple Support Communities
Can you download the driver properly or the error happens while the driver is being downloaded? As you are saying that you can't install the driver, check this website > http://support.apple.com/kb/HT5290

I wanted to watch a BNN video on my iphone 4, but I was told I needed Adobe Flash Player. Adobe says Apple does not allow to install Flash Player on iPhones. Any suggestions?

I wanted to watch a BNN video on my iphone 4, but I was told I needed Adobe Flash Player. Adobe says Apple does not allow to install Flash Player on iPhones. Any suggestions?

See if BNN has an app in the app store or do without.
Adobe does not make a flash player for ipod/ipad/iphone and likely never will.
You can do a forum search and find coutless posts on this.

Desktop manager does not allow to install 5.0 Firmware

Hi all,
i got following problem. I try to upgrade several 9000 and 8900 to FW-Versions 5.0.0.190 or higher.
The Desktop-Manager recognizes the installed Firmwares and shows them BUT marks them with an asterisk.
Then it states
"only users with an activ subscription the the Blackberry-Service are allowed to install this BB Device Software."
Can anybody help me with that problem ?
By the way: it worked once or twice , but now, on any PC i install the Desktop Manager and the Firmware Files this error occurs.
Greetings from Munich, germany,
Markus

The device you are upgrading must have an active connection to a BlackBerry Data Plan.
You will see this message if you do not have a data plan on their BlackBerry and they try to use Desktop Manager 5.0 to upgrade to BlackBerry Device Software 5.0 or greater. Sometimes you will see this error if the user has never turned on the mobile network on their device so that might be all that is needed to work around this.
This is a new requirement of RIM for devices upgrading to OS 5
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MacBook Pro 10.8.5 not allowed to install server software - needs 10.9.

Brand new MacBook Pro updated software to 10.8.5 but will not let me install server software because it says I have to update to 10.9. I don't see how to do that anywhere. New Mac user
Thanks for any help.
This is a new laptop I am helping setup for a school. it needs the server software to run configurator that will control a couple of ipads for the children. Cant seem to get past this first step of trying to install server software.
Thanks
Jason

Open up the App Store from the Apple logo. In the Featured tab search for OS X Mavericks under Top Free. This is 10.9. Click on the Free Upgrade option which should update the Mac to 10.9 which will hopefully allow Server to run.

Two issues: Mail dotcom is now telling me to enable java in my browser and firefox has issues w/duckduckgo search engine. I am not allowed 2 instal DDG n search

2 issues: After a windows update on 5 10 2012, maildotcom says I need to enable java in my browser, when as far as I can tell, it is.
Second issue is, I am not able to add duckduckgo as my preferred search engine. I get a pop up in search tool add-ons that says "sorry, you need a Mozilla based browser to install a search plug in."
Why and how can these irritations be fixed?

'''''NoScript''''' 
*To add a site to the NoScript "whitelist" ('''always allow''') --> when on the site, click the NoScript icon and choose "Allow ''site''"; the site will be placed on the NoScript Options > Whitelist (non-italicized).
*If you click "Temporarily allow ''site''", the site will be allowed during the Firefox current session (until you close/exit Firefox) and will be placed on the NoScript Options > Whitelist (italicized) and will be removed from the whitelist when you close/exit Firefox.
*NoScript Whitelist --> click the NoScript icon, choose Options, click the Whitelist tab
'''''DuckDuckGo''''' (you probably would want 1 & 3 or 2 & 3) 
#This adds a DDG '''toolbar''' and says it adds the "''encrypted (HTTPS / SSL) version of DuckDuckGo in your '''search bar'''"'' --> https://addons.mozilla.org/en-US/firefox/addon/duckduckgo-ssl/
#You can '''add only an item to the Search Bar''' (without a toolbar) by choosing one of the items here --> http://mycroft.mozdev.org/search-engines.html?name=duckduckgo&opensearch=yes
#You can '''change the Location Bar search''' (replacing the default Google search) by following these instructions --> http://ilias.ca/blog/2012/03/how-to-make-firefox-use-duckduckgo/
This DDG page says there is some problem installing DDG plugins but does not explain the problem or who is responsible for fixing the issue
*http://help.duckduckgo.com/customer/portal/articles/216441-firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

EPM system Installer 11.1.2.2 is not allowing to install all Products

Hi All,
I am trying to Install EPM system 11.1.2.2 in Solaris machine, but in the Product Selection it is allowing to select only "Foundation Services" and all other Product Components are disabled.
Note:
EPM System Prerequisites check is showing that all prerequisites are okay.
This is the New Installation and no existing EPM installation is there in this box.
Have used the same assemblies in other Solaris box and it is working fine there. Please advice what can be the prospected reason for it.
Thanks in advance.
Regards,
Abhay

Hi,
Have you extracted all the product components assemblies to the same folder from where you are launching the installTool.cmd/.sh?
The products that are grayed out is because you don't have zip files or assemblies extracted to that folder??
So try extracting all the product components zip files to the folder and then launch the installtool.cmd/.sh.
I am sure that you will then be able to select and instakll the products ..
Regards,
Sourabh

Not Allowed To Install Adobe Reader 9

I'm using a G4 eMac with 640 megs of RAM running Mac OS 10.4.11. According to the system requirements, I should be able to install Reader 9 with no problem.
Download of the install package went fine.
I'm able to open the Adobe Reader 9 install, but then I get a message saying
"Adobe Reader 9 cannot be installed on this computer.
Make sure your system meets the requirements."
Help.

Thanks for responding quickly. It's definitely the Mac installer package (it's called "AdbeRdr90_en_USi386.pkg", and it does open up. And I downloaded it via the Adobe site, which asks which version of Mac OS is being used, prior to even allowing a download.

NOT ALLOWED TO INSTALL!!!

I downloaded the iTunes software 8.0.1,
* I'm trying to install the software.
* I uninstalled the old version.
* I ran Registry Doctor.
* I rebooted the computer.
"There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
And it uninstalls iTunes afterwards.
What's up? I can't update my iPhone without iTunes!

Uhp. I fixed the problem. Nevermind.
It took using "Windows Install Clean Up" utility and deleting all the installation notes on my computer.

10.7.1 Lion not allow to install scanner Microtek ScanMaker 5900

Why does not recognize the scanner?

Microtek is famous for not providing drivers so that their old scanners can work with newer operating systems. The last time I upgraded the teachers' computers in my schools 300 Mircotek scanners insgtantly became trash I don't buy them any more. won't waste taxpayers' money.

Usd wifi expander (Asus) driver not allowed to install

i download drivers for usd wifi expander (Asus) usb-N13 B1but the pc not permitted to open because of the follow remark "installer.pkg can't be opened because it is from an unidentified developer. please assist.

Why are you using an extender with Keynote?

Resolution (1024x600) does not allow to install Media Manager. Alternative available?

GDay,
I've tried to install the Media Manager on my new netbook, which has a max resolution of 1024x600. Media Manager requires 1024x768. It comes up with a warning and closes the installation process.
is there a way around it?
Appreciate any advice.
Cheers.

I have temporarely solved my problem. I got the Media encoder CS6 folder out of my trash bin and put it back in the apps folder along with the CC version and everything works like a charm.
Thanks anyway!

Snow Leopard 10.6.8 will not allow install Mountain Lion-why?

I have Snow Leopard 10.6.8
MacBook
MacBook4,1
However it will not allow me to download Mountain Lion...can anyone tell me why?
Thank you!

This is your computer
Introduction Date:
February 26, 2008*
Discontinued Date:
January 20, 2009
Processors:
1 (2 Cores)
Geekbench:
2827/3201*
Processor Speed:
2.1 GHz
Processor Type:
Core 2 Duo (T8100)
Details:
The Intel "Core 2 Duo" (T8100) 45 nm "Penryn" processor includes two independent processor "cores" on a single silicon chip. Also see: How much faster is the "Early 2008 Penryn" MacBook Core 2 Duo compared to the "Late 2007 Santa Rosa" MacBook Core 2 Duo?
Custom Speeds:
N/A
Architecture:
64-Bit
Processor Upgrade:
Soldered
FPU:
Integrated
System Bus Speed:
800 MHz
Cache Bus Speed:
2.1 GHz (Built-in)
ROM/Firmware Type:
EFI
EFI Architecture:
64-Bit
L1 Cache:
32k/32k
L2/L3 Cache:
3 MB (on chip)
RAM Type:
PC2-5300 DDR2
Min. RAM Speed:
667 MHz
Details:
Supports 667 MHz PC2-5300 DDR2 SDRAM. Also see: How do you upgrade the RAM in the MacBook? How much RAM of what type does it support?
Standard RAM:
1 GB
Maximum RAM:
6 GB*
Details:
1 GB of RAM is installed as two 512 MB modules, no slots free. *Apple officially supports a maximum of 4 GB of RAM but third-parties have been able to upgrade the system to 6 GB of RAM using one 2 GB and one 4 GB memory module. In the US (and many other countries), site sponsor Other World Computing sells memory -- as well as other upgrades -- for this MacBook. In Canada, site sponsor The Mac Market sells memory and other upgrades for this MacBook.
Also see: Actual Max RAM of All G3 & Later Macs.
Motherboard RAM:
None
RAM Slots:
2
Video Card:
Intel GMA X3100
VRAM Type:
Integrated
Details:
Also see: How much faster is the Intel GMA X3100 graphics processor in later MacBook models compared to the Intel GMA 950 in earlier models? Is gaming performance improved?
Standard VRAM:
144 MB
Maximum VRAM:
144 MB
Built-in Display:
13.3" Widescreen
Native Resolution:
1280x800
Details:
13.3" color widescreen TFT active-matrix "glossy" display with a 1280 by 800 native resolution. Apple reports that it also supports "1152 by 720, 1024 by 768, 1024 by 640, 800 by 600, 800 by 500, 720 by 480, and 640 by 480 at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; [and] 720 by 480 at 3:2 aspect ratio". Also see: What exactly is a glossy display? Is the glossy display used in the MacBook better or worse than the previous iBook display? Site sponsor Mission Repair offers free diagnosis of MacBook hardware problems and a 24-hour repair service for this MacBook. Display repacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring
2nd Max. Resolution:
1920x1200
Details:
The maximum resolution supported on an external display is 1920x1200.
Standard Hard Drive:
120 GB (5400 RPM)
Int. HD Interface:
Serial ATA (1.5 Gb/s)
Standard Optical:
8X "Combo Drive"*
Standard Disk:
None
Details:
Apple reports that this slot-loading "combo" drive (DVD-ROM/CD-RW) "reads DVDs at up to 8x speed, writes CD-R discs at up to 24x speed, writes CD-RW discs at up to 16x speed, [and] reads CDs at up to 24x speed." On October 14, 2008, Apple reconfigured this model with an 8X DL "SuperDrive". Also see: What are the capabilities of the optical drive provided by the MacBook models? Which can read and write dual-layer DVDs?
Standard Modem:
None
Standard Ethernet:
10/100/1000Base-T
Standard AirPort:
802.11a/b/g/n
Standard Bluetooth:
2.0+EDR
USB Ports:
2 (2.0)
Firewire Ports:
1 (400)
Details:
Two 480-Mbps USB 2.0 ports. One Firewire "400" port.
Expansion Slots:
None
Expansion Bays:
None
Details:
No expansion slots or bays provided.
Incl. Keyboard:
Full-size
Incl. Input:
Trackpad
Case Type:
Notebook
Form Factor:
MacBook
Apple Order No:
MB402LL/A*
Apple Subfamily:
Early 2008
Apple Model No:
A1181 (EMC 2242)
Model ID:
MacBook4,1
Details:
Please note that these identifiers refer to more than one model.
Also see: All Macs with the A1181 Model Number, the 2242 EMC Number, and the MacBook4,1 Model Identifier.
For more about these identifiers and how to locate them on each Mac, please refer to EveryMac.com's Mac Identification section.
Battery Type:
55 W h Li-Poly
Battery Life:
4.5 Hours
Pre-Installed MacOS:
X 10.5.2 (9C2015)
Maximum MacOS:
X 10.7.5*
Minimum Windows:
XP SP2 (32-Bit)*
Maximum Windows:
7 (32-Bit, 64-Bit)**
MacOS 9 Support:
None
Windows Support:
Boot/Virtualization
Details:
Also see: Are there any third-party programs to run Mac OS 9/Classic applications on Intel Macs? Site sponsor OHS specializes in heavily upgraded Macs capable of running both Mac OS X and Mac OS 9 applications. For more on running Windows on Intel Macs, please refer to the exhaustive Windows on Mac Q&A.
Dimensions:
1.08 x 12.78 x 8.92
Avg. Weight:
5.0 lbs (2.27 kg)
Original Price (US):
US$1099*
Est. Current Retail:
US$600-US$700

Having a problem with noises and mouse jumping, tried to reinstall and computer will not allow me to select the correct install icon. Sends me to xcode install

my kids computer began acting up this spring...so I shut it down.
Would not stay turned off, various noises almost continually, jumping highlights, etc.
Decided to reinstall os x snow leopard. insert disc and icon appears. then 3 icons with x in a column.
automatically highlights middle icon and will not allow me to select one above. Says install xcode.
not what i want to do.
any help?

What model iMac do you have?
What version of Mac OS is it running? If you don't know, try to give approximations on when it was set up and whether it was ever updated so we can take our best guess.
How are you trying to boot from the install disc? Your description of 3 icons with x in a column' leads me to believe that you aren't booting from the install disc, but rather you are inserting the disc after booting from the OS that is installed on the hard drive. If that is what is happening you'll see something like this, although it will vary depending on the actual version of the Install Disc that you have and how you've chosen to view the files (icon, list, column, etc).
What happens if you restart the system with the Install Disc inserted, then quickly hold down the 'c' key so that the system attempts to boot from the Install Disc. Do you still experience the same issue?

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

Not allow to install AE & Pr on Leopard?

Similar Messages

Maybe you are looking for