Not allowed to use Cisco Connect anymore. Help?

I recently changed my wireless password, in the advanced settings, to not match my router password. Now that I try to use Cisco Connect, it says that I can not because I changed the a password in the advanced settings. Is there anything i can do to undo this change?

If you change the password of the router or wireless network using the setup page of the router then Cisco connect software will stop working. You can change the router password to match with Wireless network password.
Open the setup page of the router. Go to Administration tab and change the router password.
See if that makes Cisco connect to work. If not then I think you will need to reset the router and reconfigure it.

Similar Messages

  • Nokia 2730 does not allow to use socket connection

    I recently bought a Nokia 2730 Classic, but I am not able to browse internet on this phone through the Socket connection, like how the other Nokia 2330 Classic can do.
    For the Nokia 2330 Classic, I need just put the SIM into it and start the phone, then go to the configuration and just select Internet APN as the Access Point and the phone will work fine with Opera Mini and other Java applications like Ebuddy, Bolt Browser etc through “socket” connection”, without the need to request the internet settings from my operator through SMS.
    But in the Nokia 2730 Classic when I put the same SIM into this phone and Select the same Internet APN as the Access point, I am not able to browse the internet on Opera Mini and I have to send SMS to my operator to get the settings.
    The main problem here is that even after saving the internet Settings of my operator on the Nokia 2730 Classic, the internet does not work on in the Socket Connection, hence Opera Mini 4.2 and 5.1 (and other java applications which need the socket connection) will not install or work. (although the internet will work on the default browser of the phone)
    I am also able to connect the Nokia 2730 Classic to the computer and browse the internet through Data Cable / Bluetooth normally.
    I tried with another operator using an internet data plan, but got the same results.
    Can someone please tell me how to adjust the settings correctly so that the Nokia 2730 will work on the Socket connection so that I can browse on Opera Mini 5.1 and 4.2 and other Java browsers and applications which work only on the Socket connection?
    Another strange issue is that after trying to use the internet on the Nokia 2730 (without any positive results), when I put the same SIM back into the Nokia 2330, the internet does not work for some hours on the socket connection and I have to use the http connection till then. Quite strange.
    Any help will be greatly appreciated.

    My problem is sounds to be somehow related to this. Actually, I do not have reference if the problem was already on SW version 9.41 (?), but at least after the firmware upgrade (v 10.40) I get the following message "Suojattu yhteys ei käytettävissä" ~ in English "Secure connection not available" when trying to open https links e.g. directly from text message.
    Obviously, the same problem happens with I try to download an application from Ovi. I am able to browse the applications in the service, but once trying to download/install the problem occurs.
    Opera is capable to open the https connection, but OVI does not support it => there is no way to install any application from Ovi. I have tried both Elisa and Saunalahti SIMs, but it seems not to be a settings releated.
    One note still in the firmware upgade: when doing it it first time, there was an error when restoring the backup. I made the firmware upgrade couple of times again and even so that I did not restore the backup.
    Could it be that the first time firmware upgrade somehow bricked the phone? I have also been wondering, why there is no settings menu available in Web section?
    Any ideas?
    BR,
    Mika
    /* Mika */

  • TS1441 My ipod was recently disabled and now says "connect to iTunes" although my ipod has never been synced to my Mac laptop it will not allow me to. I need help.

    My ipod was recently disabled and now says "connect to iTunes" although my ipod has never been synced to my Mac laptop it will not allow me to. I need help.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup (if you have an iCloud backup) see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

    Hi
    Here is the situation:
    I have a Farm with 3 servers W2012R2 in a Domain
    Server1                           Server 2                                  
    Server3
    RDSession Host            RDSession Host                            
    RDSession Host
    Connection Broker        Connection Broker (Passive)
    RD Web Access
    2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                        -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
    I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
    The certificate Manager has generated 2 CA certificates :
    - 1 for the RD Web Acc (poc.mydomain.local
    -1 for Connection Broker SSO and for publishing
    I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
    Server GPO :
    Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
    Always prompt for password upon connection=Disabled
    Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
    Set client connection encryption level : High Level
    Client GPO
    Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
    TERMSRV/POCCB.mydomain.local
    I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
    I have now problem with SSO.
    Connection with remote desktop client with server name = poccb.mydomain.local
    Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
    If in my client GPO I add the physical name of the 3 servers, it works :
    TERMSRV/Server1
    TERMSRV/Server2
    TERMSRV/Server3
    Open RDP Files with server name = poccb.mydomain.local
    if my connection broker connects me on Server1 , no problem
    But If I arrive on Server2 & Server 3=
    Your system administrator does not allow the use of default credentials to log on to Work Resources
    I have searched on internet. No result for " to log on to Work Resources"
    Any idea ? Thanks for your help

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly check that, your user is using domain\username to enter the credential in the dialog box.
    Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
    As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
    Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
    Allow Delegating Default Credentials with NTLM-only Server Authentication
    Allow Delegating Default Credentials
    Allow Delegating Saved Credentials
    Allow Delegating Saved Credentials with NTLM-only Server Authentication
    Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
    More information:
    Remote desktop credentials did not work
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Not allowed to use olsql on this Db

    hello all.....
    I have this message when i try to into plsql developer with connection normal, when i use sysdba no problem but i can't see some stored procedures...
    message full:
    you are not allowed to use pl/sql on this database.
    how i can to fix the problem when i access normal way??
    thanks for you help!!!

    I believe this has to do with custom authorization functionality implemented by the PL/SQL Developer product. See the online help to learn how to either grant the privileges you desire or disable the authorization functionality (note that this will not affect native database authorization, just the optional, custom layer implemented by the PL/SQL Developer product).

  • I misplaced my ipad, so I remotely erased it.  Then I found it, but now I cannot use all of the options in the settings.  I have restored from backup, but it still is not letting me use all functionality.  Help!

    I misplaced my ipad, so I remotely erased it.  Then I found it, but now I cannot use all of the options in the settings.  I have restored from backup, but it still is not letting me use all functionality.  Help!

    Would throwing it in Recovery mode and restoring as new clear it up?
    (same for Ipad)
    Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
    In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
    Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
    Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
    Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
    Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
    Under Creative Commons License: Attribution No Derivatives
    THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
    LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it.

  • IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

    iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

    Hi Anjohi,
    Thanks for visiting Apple Support Communities.
    If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
    iOS: Edited photos show original photo after import or in other apps
    All the best,
    Jeremy

  • Error Employee is not allowed to use cost object

    I am getting below error when I try to submit my expense.
    Employee 1833539 is not allowed to use cost object 9443688 - 10 of type Sales Order Item on 05/01/2014
    I cheked few things as below.
    1. I do have valid sales order with valid end date
    2. I did enter my time in ISP for the date in question
    3. The work location entered for the date in question is "On Premise" which means I travelled.
    has anyone faced similar issue? Any help is greatly appreciated.
    Regards,
    Rajesh

    I suggest that you report an incident so that your travel department can confirm if you are staffed on the SO in SAP Cloud for Travel and Expense. 

  • I am not allowed to use upgrade on this computer ???

    Itunes 7.6 keeps telling me, that I am not allowed
    to use the Jan-update on my computer ? ? ?
    It does not allow me to sync the upgrade
    to my ipod touch FW 1.1.3 eventhough my Vista-PC
    is activated to Apple.
    Need help - thanks

    It works for me now.
    I had to delete the folder C:\ProgramData\Apple Computer\iTunes\SC Info
    Subsequently, I had to authorize my computer from the administrator account.
    Seems that VISTA messes something up when you try to authorize the computer from a non administrator account.
    Gruz

  • Why is not allowed to use "/" in Storage bin?

    Dear experts,
    It is mentioned in the Help that "For technical reasons it is not allowed to use the special character "/"  while creating storage bins.
    Kindly let me know what is the technical reason behind this?
    regards,
    Shetty

    / is a character that is used in IDOCs to indicate that a field should be left untouched
    So it is impossible for SAP to decide whether it has to input the / or to not process this field.

  • "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card?

    "There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card? There is a hardware fault but this is confined to the internal sim card receivers and purely the parts related to the sim card there are no other hardware faults! I've tried dfu mode and a restore and cant find anything related to this anywhere on the internet, thanks for any help in advance, Bobby

    iPhones require a SIM card, that card does not need to be active.

  • Using Cisco Connect

    I am trying to change the password on my Guest Account but am having no luck.  I do not have a key and when I click on the Cisco Connect icon it tells me ....
    "The router password or wireless settings have been changed using advanced settings.  This applies the changes directly to the router and you can no longer use Cisco Connect."
    Inserting the set up CD get me nowhere as it thinks the router was set up on another PC.  Not the case.  So, what do I need to do to move forward?  Is there a logical reason as to why this activity is not part of the router interface?  Is there a plan to change this debacle?

    Found out that I must reset the router and start from scratch to get into guest account settings.  I just can't believe Cisco would set up a product this way.  Oh well.  You pays your money and takes your chance......

  • Can I use Cisco Connect if I change the default router IP address?

    I am adding my E3000 into an existing network behind a SonicWall firewall.  I am using an address scheme of 192.168.168.xxx  When I change the router address to 192.168.168.10 and disable DHCP in Cisco Connect, I am left with only being able to access the router through the web interface.  This seems pretty lame; I've read other threads on Web vs. Cisco Connect.  Is there a quick fix that will allow Cisco Connect to still find the router after I've made (just) these two changes?
    --David C

    Yes you still will be able to use the Cisco Connect software if you have changed the Routers IP address, But if you change the Router password of Wireless Security then you wont be able to use Cisco Connect software.

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • Error in COR1 - Material not allowed to use

    Hi,
    Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
    Regards,
    Suresh

    Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
    look for material master changes
    Regards
    Ratan
    Edited by: Ratan on Jun 22, 2009 4:17 PM

Maybe you are looking for