Not allowing to enter Change-Order Screen

The moment the order no. is typed in IW32 and you enter it, system throws the error message;
Inconsistent data: Order 5000000363 29.12.2002, duplicate entry O 0090
It gives the following error;
Diagnosis
Processing had to be canceled due to inconsistent master data or order data. The system found duplicate entries for object O 0090 (abbreviation meaning, see below).
System Response
Processing for this order was canceled.
Procedure
For inconsistent order data, the order number is given. For inconsistent routings, the plan number is given.
Inconsistent order data
The order number and master data explosion date is given. Examine the order in the order information system in the object overview, and display all objects. You might be able to see the duplicate objects here. Try and find out the origins of the duplicate entries, then contact SAP to resolve the inconsistency.
Can anybody help me in resolving this?

Check for notes first on service.sap.com
Probably some note will need to be applied. Try to involve the BASIS consultant in case u don't find the right/suitable note. An inconsistency in the data has occured because of which there is that error.
Pls don't forget awarding points for my replies including the earlier ones.
thanks
Bala

Similar Messages

HT204053 in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud

in my iphone settings, my phone has not allowed me to change the apple id account i want to use for icloud
im using another id for my purchases, which was the same one set for icloud, but i wasnt using icloud, now i made a new id, and want to set it for icloud, but its not offering me the chance to change it in icloud settings

Welcome to the Apple Community Rozie.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Itunes will not allow me to change the installation drive...

I have a PC with a hard drive that previously was partitioned into C: and D: segments. I have since removed the D: partition. itunes thinks it is still installed on the D: segment and keeps trying to perform downloaded updates there. My current D: drive is now a DVD ROM. When trying to install itunes updates, it will not allow me to change the destination. When I try to change it, I get the message "The volume D: is currently unavailable. Please select another." Then it gives me the "Finish" screen and doesn't allow me the option of changing the drive. SO... I tried uninstalling itunes. itunes will not allow me to uninstall it either. Please help.

Even though you're getting a slightly different error message, I'd try the following user tip:
"Invalid drive X:\" install errors

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

How do I change the dimensions of an image? The Image Size dialog box will not allow me to change it

How do I change the dimensions of an image? The Image Size dialog box will not allow me to change dimensions. I am taking an online class and the Image Size dialog box looks different than the one I am seeing in Photoshop CC. It has the option to change the dimensions.

When you say chage the dimentions, do you mean crop the image and adjust the size of the image at the same time, or do you mean you want to just resize the image? Can you post a screen shot of what you're trying to do?

Not allowing to enter PO price with 3 decimals

Hi,
This is reg an issue, when i try to create PO and enter PO price with 3 decimals, its not allowing to enter value as for eg .231 whereas it allows .23.
Can any one explain why its not allowing to enter 3 decimal values.
Wheather this can be changed in configuration, if not what could be the corrective measure.
Regards
vasanth

Dear vasanth,
Please check OY04. However the customizing here normally will be defined at very
first you the company use the system. Frequently changes or subsequently change
might affect the already purchase document in the system and this will create system
inconsistency.
Therefore, if you want to do this, if have to study it carefully and make sure it not affect
the existing purchase document or else you will be in inconsistency.
I will advice you to make a thorough test in sandbox to see if suit you and study all the
impact. If ot was ok, then only goto prod.
Best Regards,
Ian Wong

HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep i

Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep it as my primary.

To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account. To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Oracle Diagnostics not allowing to enter parameter

While running Oracle diagnostics through Front End in R12 user is not able to give the parameters for WorkPlan...and getting the below error...
Invalid (tests) selected. Please change to developer mode to get more details
Anyone have any idea why its not allowing to enter the parameter and also getting the above error

hi, was wondering if you ever resolved you issue where you're getting an error message of "Invalid test(s) selected. Please change to developer mode to get more details." We just upgraded to 12.1.3 and are experiencing the same problem.
Thanks,
Julie K.

Will not allow me to change a user password

Okay this is a little different. This has gotten me a little puzzled and I am hoping someone with some knowledge about File Vault etc can help.
I have this machine where there is a user name and a password (that we can't remember) with File Vault turned on. We know the master password however the master password will not allow us to change the users password.
We have tried changing the Master Password to ensure that the password is not the issue and that was successful. We tried using the Master Password to try and change another user account (not with File Vault turned on) and it gives us no problems.
I have tried changing the password in System preferences and I get an error message CSSMERRCODE_MEMORYERROR. I tried going to the login screen letting the login attempts time out where it asks for the master password, then it prompts me to reset the password. No matter what I put in the "new" and "verify" (yes they both match) the screen just shakes and won't let me go any further.
I have repaired the permissions and tried resetting the password with the Leopard DVD and also came across no luck. Because the User has File Vault turned on I can not even back up the data so I just delete the account and re-create the user!
I am really stuck here and any help would be greatly appreciated.

Okay strangely enough, I tried to reset the password back. We had an old File Vault password that we changed to the current one and then changed again during this process. So taking what you said, I reset the Master password to the original one we had a long time ago. It did not allow us to change the password. However when I changed it back to the one we had changed it to a second time, it wouldn't let me change it at the login screen but it allowed me to change it in the Account Management under System Preferences.
So it is fixed. Needless to say I disabled File Vault and it will never be used again! Thank you for your reply it definitely helped me resolve this issue.

HT1918 It will not allow me to changer my form of payment. I have tried many times. Any ideas?

Itunes will not allow me to change my form of payment. Any ideas?

I purchased it from my University bookstore and the attending clerk was no better informed than was I.
The form is required to be infilled in order to receive the serial number necessary for installation of the software
After five hours of trying, I was able to overcome the flaw in the form, as it appeared on the Acrobat website, and
complete the two pull-down menus indicating the State in which I live.
I called Adobe Customer Care for assistance and had to wait two hours for a return call, and by the time the
call came though I had found that the website form allowed me to pull-down for the State of location.
Adobe is an uncaring vendor, once it has your money in hand.

System shud not allow for batch change after bacth determiantion.

Dear ALL,
I have one Isuue at my client , there requiremtn is -
"Performing the process it was detected that the raw material and packaging material batches could be changed after the process order created, which allows to picking a batch instead FEFO. "
Is there any way that system not allow for any change related to batch and its qunitity.
Awaiting for fevorable respoce.
Regards,
Prerna Verma

Hi Prerena,
Activating Check Batch Tab in COR4 will performs an additional check in order itself.This check works after completing Batch Determination.For example during Batch Determination system has selected (as per your sort rule) Batch X for issue.But later User tries to change this Batch No. to Batch Y(by overwriting the batch no. in Batch field).But if you have activated this Check Batch function then system will perform the check immediately whether this new Batch complies the Batch Determination rule or not.And if found wrong then gives you an error or warning msg(depends oin your msg control).
my second point is regarding Transaction code COB1 to deactivate the Allow change function.See if you activate the this tab then you finds that qty fields editable during Batch determination.So you can change the qty. manually during batch detemination.
So in your case 2 level checks required.
1) During Batch Determination (COB1) - Deactivate Allow change
2) After Batch Determination(COR4) - Activate Check Batch
Regards,
Dhaval
Edited by: Dhaval on Sep 27, 2010 8:43 PM

Voice over does not allow me to open locked screen

voice over does not allow me to open locked screen iPhone 6
<Subject Edited by Host>

Use two taps wherever you would use one tap. Navigate to Settings/General/Accessibility and turn it off.

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com

Not allowing to enter Change-Order Screen

Similar Messages

Maybe you are looking for