"NOT ANSWERED" Unable to enable PDFMOutlook in Outlook 07

Running Outlook 07, Acobat 8 Pro. I check the add-in block with then askes for a file name. I don't know what it s asking for to be written in. It also says it is not loaded. Checked add-ins say loaded at start up. What's do I need to do.

Hi Dave,
If you don't see the Adobe PDF menu in Outlook I'd recommend reinstalling Acrobat to see if that adds the PDFMaker option to Outlook. Make sure Outlook is closed prior to reinstalling Acrobat.
Steve

Similar Messages

  • Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

    JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
    However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
    I read and followed the directions listed here:
    <a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
    The options that they tell you to set are simply are not there on my system.
    I am running the most current drivers and console launcher that Creative has on their website.
    I have been trying to get it to work both under Windows XP and Windows 7.
    I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
    Thanks in advance for any suggestions!

    Ah that's what I am afraid of.
    Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • Unable to Enable Maintenance Mode

    This is my new challenge. I am unable to enable the maintenance mode. Following is the error message taken from adadmin.log. At the same time when I issue the command to enable it, there is core dump in the alert log and this is what it says. Please help me troubleshoot this issue.
    Errors in file /oraadmin/SID/udump/SID_ora_7943.trc:
    ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
    Change Maintenance Mode
    Maintenance Mode is currently: [Disabled].
    Maintenance mode should normally be enabled when patching
    Oracle Applications and disabled when users are logged on
    to the system. See the Oracle Applications Maintenance
    Utilities manual for more information about maintenance mode.
    Please select an option:
    1. Enable Maintenance Mode
    Please select an option:
    1. Enable Maintenance Mode
    2. Disable Maintenance Mode
    3. Return to Main Menu
    Enter your choice [3] : 1
    sqlplus -s &un_apps/***** @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
    declare
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    memory exhausted
    ORA-24323: value not allowed
    Error accessing package DBMS_APPLICATION_INFO
    ERROR:
    ORA-03114: not connected to ORACLE
    memory exhausted
    memory exhausted
    An error occurred while running adsetmmd.sql.
    Continue as if it were successful [No] : No
    aiimToggleMaintenanceMode():Error while calling aiucm3().
    AD Administration error:
    Unable to Enable Maintenance Mode.

    Yes, I was able to enable it from the backend;
    SQL> @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
    PL/SQL procedure successfully completed.
    Commit complete.
    I am quite sure it did not work when it tried last night.
    Let me try to do it using adadmin again. May be issue is no longer an issue.

  • Unable to enable DirectX effects (hangs at 92%!)

    When I try to enable DirectX effects, Audition first refreshes the effects list. It does this fine until it gets to 92%, then it hangs, stopping at the same effect (JetAudio Sound Effector V3) each time. Audition is still running but nothing happens, it just doesn't go any further, and I have to force close the program.
    Can anyone think of a way I can stop this one effect from loading? I searched but couldn't find any file with that file name.
    I am unable to enable any of my DirectX effects. Thanks for any help.

    Dodgy DirectX has always been a bit of a problem. Unlike VSTs, which are essentially DLLs that sit somewhere nice and sensible, and you can install and delete them easily, DirectX has to use an installer, and heaven only knows where it puts the appropriate files... although I understand that the real issue with removing them is that they end up as registry entries, and not necessarily straightforward ones either.
    Probably the most useful thing I can suggest is that you look at this thread on the KVR forum, where there are a couple of suggestions.

  • "Unable to enable debugging" within Workshop 8.1

    I'm testing a portal application with workshop 8.1. When I started the .portal, I got this error "Unable to enable debugging. Verify that you webapp deployed correctly". If I choose to start without debugging it's OK.
    The deployment was successfully done without error. Is there anything else I can check?
    Thanks

    Thanks.
    One of my concerns is that this change will update the .work file with some local values such as host name and port number, etc. For some reason we could not use a generic name such as "localhost" in our development. This causes a little problem since the .work file contains some hard coded parameters can not be shared amoung other developers.
    Hopefully there is another better solution.
    Thanks again for the help!

  • Unable to enable vt msi gt628

    hello guys, I'm having the issue with my msi gt628 that I'm unable to enable virtualization in the bios. I updated the bios, but the updated version does not have any extra options and I need to be able to vitualize windows server 2008 x64 for school. Is there a better bios available or will I have to buy a new system?

    what's your CPU used?
    have you actually checked to see if its enabled?

  • Unable to enable Multiprocessing

    Hi, I'm using After Effects CC 2014. I am unable to enable this option, even when I was using previous version of AE.
    I'm using a laptop with Intel Core i5 4210U, 1.7 - 2.7 Ghz with 4Gb of RAM.
    Any reply is appreciated.
    Thank you in advance!

    Your system does not meet the minimum system requirements. First, get more RAM....
    System requirements | After Effects

  • Unable to enable debugging

    Every once in a while I get a message 'Unable to enable debugging. Please verify
    that your webapp is deployed correctly. I can't seem to figure out why?

    Tito,
    If you are working with multiple servers on the same machine, and have not
    shutdown the debugger which was started for a different server, then you
    could end up with this error message.
    Please make sure that you use the stopweblogic script to shut down servers
    in development mode. This script will make sure that both the server and the
    debugger process are shutdown.
    Regards,
    Raj Alagumalai
    Backline Workshop Support
    "Tito Kumar" <[email protected]> wrote in message
    news:4076dad5$[email protected]..
    >
    Every once in a while I get a message 'Unable to enable debugging. Pleaseverify
    that your webapp is deployed correctly. I can't seem to figure out why?

  • Unable to enable "Include in Building Default Conditions"

    Hi Gurus,
    I am unable to enable the "Include in Building Default Conditions" checkbox of Defaulting Rules in OM.
    Application : Order Management
    Entity: Order Line
    Defaulting Seq : 50
    Attribute : Bill To Contact (Unable to enable Include in Building Defaulting Conditions)
    Could you please help me out in this....
    Thanks in Advance.

    I was looking at both the technet article for setting up UPD as well as this walk-through:
    http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
    The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
    where 'everyone' has full permissions on both the share and the folder.
    I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
    in all cases. 
    I also found this Technet article: 
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
    So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue? 

  • HP Photosmart Plus B210 unable to enable web service

    I just moved this printer from one location to another. I have the printer connected to the network - but I am unable to enable web services. I just keep getting a Service Connection Error that says "There was a problem connecting to the Server."
    I've looked for solutions on the HP site - but none of them have worked for me.
    Any help is greatly appreciated!
    LuAnn
    This question was solved.
    View Solution.

    Hi again LuAnn_Freund,
    Try the same steps that eunicerocksify suggested, but try these DNS settings;
    Primary DNS Server = 209.244.0.3
    Secondary DNS Server = 209.244.0.4
    If those do not work, I would suggest speaking with HP's Cloud Support Team to get this issue looked at first hand by an agent that can log onto your computer. I understand that you are posting on the Forums for a reason, but since you only have today remaining to work on a resolution, speaking with them would be best.
    Please call HP’s Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region, click HERE to find the Technical Support number for your country/region.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Unable to enable in web services using direct cable from my router

    LaserJet Pro printer is working.  Unable to enable in web tab error message: Connection error. Check Internet connection.
    I have internet connection and don't  use proxy server.  I have powered off both printer and router.  Thank you.

    Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll

    I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll.  This is preventing me from transferring my information from my old phone to my new iPhone 5c.  Can anyone help me??? A simple restart of the computer did not solve the problem.
    Thanks :-)

    I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!

  • Getting error message file not found unable to sync to ipod

    90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

    +all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
    Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
    I suspect after itunes finds it again, it will load to your ipod.
    Is this music on an external HD?

  • The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

    The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
    The wrong lens F3.5/6.3  profile is checkmarked and I can not find the new  RX10  Sony 70-200 F2.8 G SMM11 profile.  The meta data in the Library module correctly list the Sony RX10 and the Correct lens. 
    How may I select the correct lens profile for my Sony DSC-RX10?

    Ask in the PS/ LR/ ACR forums
    Mylenium

Maybe you are looking for

  • Photoshop Elements v1

    I had a copy of Photoshop Elements v1 on my computer, I believe that it was obtained from a computer magazine coverdisk that I no longer have. The program started to crash my computer for some reason and I have been unable to use it because of this.

  • Uploading cyrillic characters using XLIFF

    Hi! We would like to have a multilingual application including some non-latin character sets like chinese and russian character sets. We have translated from the primary language English (us-en) to French (fr), German (de) and Italian (it) without an

  • Laptop shows "access: local only" when connected to DROID RAZR hotspot

    Hi All - I upgraded to the VZ hotspot on my Droid a few days back. My laptop(Windows Vista) will connect to the DROID - however, the Internet does not work. I have a current wireless service that my laptop works fine with, trying to transition to the

  • Is it possible to create a link from a picture's metadata to a test file?

    Hi everyone, I am looking for a way to get a direct link to the picture's deposited right of utilisation. I prefer a link in the picture's meta data to a text file - e.g. pdf or doc. Is that possible? PC with Lightroom5. Thanks a lot for help!

  • How should a 3 TB WD Elements drive be formattet!

    Hi. How should a 3 TB WD Elements external drive be formattet for my Mac Pro! I seem to remember somebody said only with Guid the drive will be properly recognized? Thank you for any help.