Not appearing  Exicise Invoice/item tab while doing MIGO

Hi,
I am doing MIGO but in screen Excise item/invoice tab is not appearing , PO screen in Preview option also not appearing the Excise calculation component .
Could any one help me to resolve it .
Regards & Thanks
Sukant

Hi,
you have to maintain the chapter ID for the material. Then only it will come in MICO screen. maintain tax code in logistics general- tax on goods movement.
Thanks,
Venkat.

Similar Messages

  • In Depot Plant while Doing MIGO MRP indicator not found

    Dear All,
    We have one depot plant. for capturing of excise duty while doing MIGO
    I have not found the MRP indicator check box in excise ->misc. Tab.
    But for doing this same process for other manufacturing plant means non Depot plant I have found the MRP check box in excise ->misc. Tab.
    Is there any process to capture the MRP check box indicator in excise ->misc. Tab while doing MIGO for Depot plant or is there any process to book excise duty while doing MIGO for Depot Plant

    Please go through the Scenario #: Dealer Procurement in Excisable Depot scenario in the below link.
    http://scn.sap.com/docs/DOC-45855

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

  • Driver does not appear in the selection tab Windows8

    NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
    Client itself is connected to the studio and is in "Ready" state.
    There was no problem running the test on the same driver with Win7 64bit client OS.
    HCK version is 8.59.29854
    The driver is build with DDK7.1.0
    Any hints on how to debug this would be helpful.
    Dmitry

    Have you uninstalled and re-install the HCK client on the test system?  This can cause the entry on the controller to not match up with the actual client system.  If this is the case, and you have done no testing on the system (as all results will
    be lost), please try this:
    1) Uninstall the DTM client from the test system.
    2) Delete the client entry from HCK studio in the machine management section.
    3) Reinstall the DTM client on the test system.
    4) Wait for client entry appear in the "Default Pool"
    5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
    Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

  • SHCess field not appearing after using utilization tab in excise invoice

    Dear All,
    SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
    Please give the inputs.
    Regards,
    deepti

    issue resolved

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • PS Project not appearing in cProjects Accouting tab

    I am able to create the PS Project from cProjects through status management (Flag for transfer) after the required accounting intergation and other configurations.
    However, I have a concern when I am linking an existing PS project to a newly created RPM Item and cProjects Project.
    I carried out the following:
    1. Created a PS Project with a WB Structure
    2. Created an RPM Item (with auto creation of cProjects Project)
    3. Under the item, uploaded the PS Project created under step 1, to the item
    4. Saved the upload
    Result:
    The PS Project structure is replicated in the cProjects operational project.
    Concerns:
    We now want to synchronize the accounting aspects in PS from cProjects Project (like we do when we mark a cProjects project to "Flag for transfer"). However, the newly linked PS project does not appear under the "Accounting" tab in cProjects.
    Please advise.
    Summary:
    Having linked an exisiting PS project to a new created item and cProjects project, we want the operation to continue as if the PS project was created by flagging the cProjects project.
    Thanks.

    Thanks... this helps me get to a part of the problem.
    Now that I have RPM item and a cProjects project linked to a PS project, I can manually link the cProjects tasks stc. to the PS WBS elements as relevant.
    In such a case, how will "Falg for Transfer" imopact this project? I mean, whereas "Flag for transfer" in other cases create a new PS project which we can see under the accounting tab, what happens when we set this status after we have manually linked the cProjects project to a PS Project. Also, how does the accounting updates take place in this scenario (from the cProjects front end)?
    Thanks...

  • Final Cut Pro x not appearing in my purchased tab after download

    Purchased Final Cut Pro x from the Mac App store last night and downloaded it to my Macbook Pro. I want to install it on my other Mac that shares an iTunes account, but it does not appear in the Purchased tab in the Mac App store. It has been downloaded and the tab to buy has changed to the installed tab. Does it normally take a while to appear or how can I fix this? (I have tried restarting the computer, software updates, and logging out and then back into the App store)

    The same situation is happening to me I bought motion 5 first and the FCP X and the FCPX shows up as install but the Motion 5 shows up like its not installed, but in the purchase section FCPX does not show only Motion 5, and if I click on motion 5 to install it it tells me that it was not purchase in that app store that it was purchase in another app store, but my bank account shows up like if it was already purchase I am afraid to hit install in the motion tab install because it tells me if I want to buy it again.

  • While doing migo gertting error does not support serial management

    while doing migo 101mvt type getting error does not suppoert serial no management .
    Moderator: Please, avoid asking basic one-sentence questions. Your other threads were locked for the same reason

    Hi,
    Can you please check SAP Note 1262966 - MIGO and MIRO: Missing entries in T169P. This might be of some help to you. It states that
    You use transaction SM31 to delete an entry in the views V_169P_A, V_169P_B, V_169P_DC, V_169P_IRTAX, V_169P_K, V_169P_LOGO, V_169P_MB, V_169P_PA, V_169P_PR, V_169P_S, V_169P_SA or V_169P_SV. The entry from the table T169P is deleted when you delete the entry from one of the views.
    Different follow-on errors can occur in the transactions for inventory management or the Logistics Invoice Verification.
    Error M7 001 "Check table 169P: entry & & & does not exist" occurs in the transactions for inventory management. The system does not propose any data for order-related items in the transactions for the Logistics Invoice Verification.
    The entry in the table T169P is required for each company code for the function from Note 980420.
    Thnx,
    SG.

  • Why do my 3rd party loops not appear in the "Loop" tab?

    I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing.
    Does anybody know the cure for this?

    If you drag your .wav loops into the arrange area do they function properly?  If not, you may need to convert them using Apple Loops Utility.  After doing that you can drag the folder with the .aiff conversions onto your loops tab to import them.
    You might find this old thread useful:
    http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=37200

  • Getting serial number box while transfer post in MB1A but not while doing MIGO

    Hi Team
    I am getting serial number box while transfer post in MB1A.
    But getting below error under serial number tab while doing GR through MIGO of outbound delivery.
    Issuing plant and receiving plant, material, batch, qty are same in both cases.
    How can I get serial number box when doing GR? Does any customizing changes needed?
    Br, Kiran U

    Movement type is different for those two screen shots, also you are saying you are using MB1A, but you are using 301 movement type. Generally 301 movement type is not allowed from MB1A t-code.
    Please check these SAP notes if relevant for your case.
    856548 - MIGO: you cannot enter serial numbers
    856662 - T156Q: Missing entries

  • While doing MIGO transfer within plant batch no should not be changed.

    Dear All,
            While doing MIGO transfer within plant (movement type 311), any user is able to change the batch and can assign new batch no.The process is as under.
    T.Code-- MIGO
    M.type --311
    Go in Transfer posting tab.
    In "From selection",
    Select Material and that material will be displayed in Destination selection automatically and can't be change.
    Select Plant and that plant will be displayed in Destination selection automatically and can't be change
    Select Storage location(from where material to be transfered) and we have to select storage location in "destination selection" where material is to be transfered.
    Same way Select Batch No in from selection and indestination selection batch is not coming automatically and we can give any batch no.So we do not want to allow this change and the batch no must remain same as selected in "from selection".
    Now how can i solved the problem and please suggest is there any role of abapers in this case and if yes then which concept we have to followed.This is standard program of sap so access key may be needed.So please guide me on above topics.
    Regards
    Shivam Pastagia.

    Hi Sivam,
    Sorry for asking the question to this old thread but I am having the same problem.
    My requirement is also to populate the destination batch same as From Batch without allowing the user to change it.
    Can you pleae let me know how did you solve it?
    Regards
    Narottam

  • While doing MIGO system giving error massage "No account was specified for account type "D" in item "0000000001"

    Hello,
    While doing MIGO system showing error " No account was specified for account type "D" in item "0000000001"
    Kindly help me to resolve this issue.
    Regards,
    Abhijit

    Hi,
       Your issue seems to be an issue in FI. Refer the similar thread: MIGO error for UNBW material and the note: 1027645 - Message F5670: Account not specified in item X
       Found a similar issue in J1IS as explained in the KBA:  1932095 - Error : F5670 - ' No account is specified in item 0000000002 ' - in transaction J1IS
    Regards,
    AKPT

  • Sales order number not appears  in account assignment tab

    Hi,
    User raised PO for third party and account assignment category.But ,Sales order number  and its item not appear in account assignment tab.
    Can anybody help me.
    Lucky.

    Hi Lucky,
    Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
    Thanks for your inputs on this issue.
    Regards
    Rang

Maybe you are looking for