Not as fluid as 10.8.3 after update to 10.8.4

When i update my MBPR from 10.8.3 to 10.8.4 this morning, my Mac become a bit laggy. When i open mission control, the process is not as fluid as before, and also dragging windows on the screen, the process is also not as fluid as before. Does anyone also encounter the same problem as me? Does anyone know how to fix this problem?

Riyun.chen wrote:
Hope Apple will soon fix this bug..
Did you file a bug report?

Similar Messages

I can not open Airport utility on my iMac after updating to maverick 10.90.4

I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?

Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/

Some words are not highlighting on my read-aloud epubs after updating IOS 6.0.1 and iBooks 3.0.1

Some words are not highlighting on my read-aloud epubs after updating IOS 6.0.1 and iBooks 3.0.1 on both my iPad 2 and iPad 3. They are working absolutely fine earlier. I even updated the latest version of iBooks 3.0.2 but nothing is working. Can anybody help?

Hi spati,
I ran into this problem as well. Seems like something funky going on with iBooks 3. Anyways, I had to tweak my read-aloud clip starts in the smil. Where the word was not highlighting, I added a few milliseconds to the timing until the word started highlighting again. Not the most ideal solution, and not sure what exactly causes it because 90% of the words were just fine, but it seemed to fix the problem. Note prior to the problem happening, I had all my clip start timings = clip end timings for the previous word, so there were no gaps.
Regards,
Tim

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3

My Ipad 2 is not charging or connecting to the pc after updating it to IOS 6.1.3, what shall I do ?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Firefox will not launch, but shows in task manager, after updating graphics drivers to AMD's 13.1.

Hi,
After updating to the AMD 13.1 drivers, on my 5770, Firefox will not launch; it does, however, show in the task manager. I should note that it will start in Windows safe mode; when I had it open in safe mode, I used that time to disable all plugins, add-ons, extensions, and created a new profile. This did not help. I also tried launching Firefox in to its safe mode, and had no luck with this either.
I experienced this problem once before, when trying to update to a previous version. I believe I was moving from 12.1 to 12.4, but I'm not 100% sure of that. Ultimately, my solution then was to retrograde back to my previous driver. The steps mentioned in the previous paragraph did not help at that time, not did a complete reinstall.
15 years of computer repair experience, and this has me baffled.
Thank you to anyone who might be able to help.
Possibly relevant specs.
Windows 7 Ultimate x64
AMD Phenom II x4
6BG Ram
AMD 5770 graphics, running Catalyst 13.1

By any chance, did you disable Firefox's use of hardware graphics acceleration? To avoid a round-trip through Windows Safe Mode, you could try adding these to your prefs.js file while Firefox is closed.
To quickly open the folder with the correct prefs.js file, you can use
Help > Troubleshooting Information > "Show Folder" button
Because Firefox may overwrite change to this file at shutdown, you should edit it after closing Firefox and allowing a few moments for Firefox to finish updates to the files.
These are the preferences I think are most relevant:
user_pref("gfx.content.azure.enabled", false);
user_pref("gfx.direct2d.disabled", true);
Does that make any difference?

Many contacts are not visible to alphabetical browse on Contacts after update to OS 10.2 on the Z10

After updating to 10.2 on Z10 many contacts do not appear on the Contacts list, but if I search for them, I get them one at a time. I can't browse for them, but they are still in a file somewhere. That file is no longer fully connected to the Contacts app, it seems. I'm going to call the two alternatives the "browsible" list when I refer to the Contact app working correctly and lsiting the contact alphabetically; and the "non-browsible" list, when I can only find them by a search.
One other thing of interest. When I add a contact that is in the same name as one on the non-browsible, I will get a message asking me if I want to replace the [old] contact. If I say yes, the new contact listing joins the hidden list and replaces what was there. If I say no, I get the contact added to the browsible Contact app. Thereafter, if I search on that name I get two hits: one is the old, non-browsible entry and the other is the new one that is browsible.
I did the 10.2 update when I was running the older BB link on a WinXP computer and it did not work to create a back-up, so I can't try restore. I now run Win7 64-bit and the new link seems to work okay, but that was installed after I upgraded to 10.2..
Any suggestions as to where I go to find the hidden contact entries on the non-browsible list? And how I get them to appear on the alphabetical, browsible, list when Contacts is opened?
Thanks for all answers.
Ken

That's another odd thing. I did make a big effort to back-up the Z10 before the update to OS 10.2.1. But, it appears to me that by downloading the new OS to my computer [T-Mobile never does push the BB updates, not as long as I've owned it, which was a few days before the US distro, when I got hold of one for the South American market in Miami Breach] it seems to have removed my installed BB Link from my laptop. And my back-up files are empty.
Last time something like this happened. there was a workaround. Do this, do that, and suddently the contacts that are lurking somewhere on the phone, appear. I was hoping for this again.
If this is a known issue, why is it not featured on the BB page where the installer was located? I would never have downloaded OS 10.2.1, if I was warned I might lose my contacts and texts.
A sorry mess.
Ken
PS Note I corrected "visible" to "invisible" in the title of this thread

Not Enough Space to Sync My Photos After Updating to 4.3

With iOS 4.2, I was able to sync my entire Aperture photo library to my iPad and still had about 3GB to spare on it. It's a 32GB iPad. If I recall correctly, the photos took up about 6GB on it. After updating to 4.3 today, iTunes is telling me that it can not sync my photos to it because there is not enough space.
How can this be? I had been syncing the entire library before with 4.2. OK, maybe Apple is optimizing the photos differently for 4.3 and they need more space, I don't know. I went ahead and cleared out all my video I had synced there along with some other stuff and freed up over 20GB of space which is available. Yet iTunes is still saying there's not enough space. How can this be? There was space with iOS 4.2, but not with 4.3. With 4.2 I had a few GB to spare even with my entire photo library synced. Now I freed up over 20GB and it's telling me it can not sync my photos.
So now I am going to try to selectively sync photos to my iPad instead of choosing the option to sync them all. I still don't understand why I was able to sync them all under 4.2, but not 4.3.

OK, I got it to work. Here is what I did.
First it seems that iTunes is over-estimating the size of the photo library before it re-optimizes it. I have 17k of photos that I sync. It was reporting it would need in excess of 30GB of space to sync it (actually it only reports that there's not enough space, it doesn't give you actual numbers, but I was able to calculate them).
So I cleared off all my videos from my iPad and whatever photos iTunes did sync to it and thus I had just over 20 GB free. Still wasn't enough space to sync my photos iTunes would report.
I know previously that my photos fit on my iPad under iOS 4.2 and even if Apple has changed the optimization process resulting in larger image files, I can't believe they would be 5x larger. So I decided to sync just a fraction of my photos. I synced about a third of my photos. iTunes reported that it would be using 10.5 GB of space for those photos. But once it optimized them and synced them to my iPad, it was less than 2GB of space. So I knew I would be able to fit them all, it is just that iTunes is over-estimating the size.
After a third of my photos were already synced to my iPad, now iTunes was reporting it would need 16.5GB for my entire library. I synced it.
In the end, I was able to sync my entire photo library back to my iPad and the resulting space used for it is 5.8 GB, not over 30GB as iTunes was estimating originally.
So if anyone else is having this issue, try clearing out some space on your iPad, and then syncing only a fraction of your library (a third or half) after that, then try syncing your entire library again. Once you do, you can put back media that you cleared out to make space.
Cheers,
Louis

Wifi is always not stable even the sign is on after updated to IOS6

After updated to IOS6, Wifi is not stable and always off line even the wifi sign is on. Aslo, the battery is running so fast.
Any advise.

spooky thing this WIFI problem. Coming home yesterday , everything worked OK for a while.
Really hope that APPLE , will respond to this issue, there is a lot of treads and suggestions for repair, but none working for me :-(

My iPod touch will not work with my ubox-f-1107 after updating to iOS 5.1.1

I have a Citroen C4 Grand Picasso 2008, I bought the UBOX-F-1107 and had it installed by the dealer here in Spain so that my Ipod touch would work and charge in my car! It worked great until I updated to the ios 5.1.1, now it does not work!!! After I plug it in it powers up, and shows Device Connected on the Ipod screen, but thats it, will not play music at all!! Please HELP!! Thanks

In order to use iMessage efficiently, add the country code to the mobile number prefix by of your contact and their iMessage ID. You will notice then when selecting the contact name in the TO, the green shade will turn into blue shade. It means your message will be sent as iMessage. Notice if you are sending message to non imessage user, the shade of the contact name is green. It means the message will be sent as text message.

Mac not printing to Windows Epson Colorburst RIP after update

I know there are several other threads going about this, but Apple needs to get the message that this is their issue.
We have an Epson 4880 running off of the Epson Colorburst RIP on a Windows XP machine.
After the recent security update, our 10.5.2 Macs will no longer print to the RIP. It will not accept the authentication. All other Macs still print fine.
This authentication process is a joke on 10.5 and it or smb has obviously been broken by the latest update.
Has anyone figured out anything to get around this issue?
Others with the same problem make sure you let Apple know that they need to fix this and it is not the printer manufacturers problem.
g

See this thread
http://discussions.apple.com/thread.jspa?threadID=1466572&tstart=0
and please send feedback to Apple.

I have changed my password and it is verified on my desktop computer but will not accept any password on my ipad after updates

after a new update, i changed my ipad password and it confirmed on my desktop, but the ipad will not accept any password....new or old

Hello glenda15,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Best of luck,
Mario

Wireless sync option not available on Itunes 10.5. After updating my iphone to IOS 5, the "sync over wifi" option is not being displayed in itunes.

hi, I managed to update both Itunes and my ios to the latest versions (10.5 and 5 respectively). I'm unable to see the "Sync over wifi" option in itunes. Can anyone help?

Maybe that's why I got lucky? I have 10.7.2. I have to tell you howeer that I did not check any check box in settings on the Notebook to enable Wifi sync, or in iTunes on the notebook. I did have options when setting up the iPad and I selected sync with computer rather than back up to cloud. Maybe that is another difference? I feel feel fortunate that as I type this my iPad is syncing over wifi and you're all having trouble.
Just to confirm I have iTunes 10.5 MacOSX 10.7.2 and iOS5 installed on the iPad. I'm going to dive in and do the phone now too. I will report any troubles, or pay more careful attention when the iCloud settings and set up come on the screen. Maybe I did something else I don't remember.

Bluetooth devices not finding or connecting to iPhone 5 after update to iOS 6.1.3?

Is anyone else having this problem? This is also happening on my ipad 4th gen. Anyone have a solution for this? It is very frustrating!

I figured it out. On the device(s) that I was trying to connect there is a function on the device that makes it discoverable by your iPhone/iPad. Some devices have an actual button that is labeled "connect" on the bottom or in an inconspicuous place on the device. Others can activate this function by long holding the action button (like that on a Bluetooth headset) for 5+ seconds until the device goes into "discover" mode. Then your iPhone/iPad should be able to find the device and you can connect. If this does not work sometimes hard resetting the actual Bluetooth device will fix the problem. You will have to research your specific device as each one has a different sequence to accomplish this. I hope this helps!

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

Not as fluid as 10.8.3 after update to 10.8.4

Similar Messages

Maybe you are looking for