"Not Assigned " accounst in FSV

Hello Members
I have some doubts in Preparing Financial statement version.
What is "no assigned " node?
What is the use of it?
There are several accounts i can C but which can be grouped in either assets , liabilities or Pl groups.
If those accounts are there in "not assigned" node how can i group them to other respective nodes?
Regards

ThanX Sridevi
My doubt is still there
In ur previous reply u said that -
" Not assigned node has the GL accounts that are part of CoA, but not included in FSV. If you include such accounts in other nodes, it will not be visible if u run the FSV report"
If i cannot see the accounts in the other nodes even after running the FSV then how i will analyse the value lying in that GL account ? (i ve clearly explained my doubt in previous reply)
can i see the accounts if i move them to diffrent nodes other than "not assigned" node?
Pls Clarify
Regards

Similar Messages

Not assigned account in FSV

HI, Expert
I have run F.01 for Balance sheet , when i drill down it show not assign account like first i click on gl account then company code then it shows not assigned ,can any one explan me how it shows
Regards
gk

it not shown in lower level of the FSV , i already checked it assigned in proper place but when i drill down it shows not assigned
I am really confused, you said it is not shown in FSV and again it assigned in proper place. Can you please give me some example for your issue.
Regards,
Ravi

Impact of GL's when not assigned to FSV. Where they will be adjusted?

Dear SAP Guru's,
When we take a trial balance through F.01 using a financial statement version which contains some gl accounts which are not assigned to that FSV but contain some balance, the trial balance which is derived is showing a tallied balance sheet. Upon further investigation we found that the same is adjusted under the head "Reverses and surplus - Balance in profit and loss account"
Is it SAP standard. If yes any note is available on this?
Please guide me.
Regards,
Anand.Inguva

Dear Anand.Inguva,
According to [help.sap.com- Special Financial Statement Items node |http://help.sap.com/saphelp_erp60_sp/helpdata/en/96/8b3c2d43ce11d189ee0000e81ddfac/frameset.htm] :
"The balance sheet net result and the P&L statement result are calculated by the program that creates the financial statements. This program also lists, under the item Not assigned, those accounts that could not be assigned to an item in the financial statement version.
The financial statement profit or loss is determined from only those accounts assigned to assets or liabilities. The accounts for the items Financial Statement Notes or Not Assigned are not considered either in the calculation of the retained earnings/net loss or for the P&L result. The balance of all the other accounts produces the P&L statement result."
Hope this helps.
Best regards,
Milen.

FSV not assigned accounts in Report Painter

Hi
I created one report through Report painter for Balance display.
After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
Thanks

Hi,
Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
Regards,
Gaurav

GL should not shown in NOT ASSIGNED node in T-Code: F.01

Dear Gurus,
My user don't want to show few GLs in FSV (i.e., in T-Code: F.01), that too in Non Assigned Node also.
Is there any setting for the same?
Regards
JS

There is no setting for that. The only way that I can think of is to put them in the G/L account exclusion list in the selection screen of F.01. Click on Multiple Selection icon next to G/L account from to fields and paste those accounts in Exclude Single Values tab. To get the list of accounts under not assigned node, execute T Code OB58, highlight the financial statement version and click on Fin.statement items button. Now click on Check (Ctrl+F5) icon and carry out the checks to get the list of not assigned accounts at the chart of accounts level or for a specific company code.
Tip: You can create a selection variant for F.01 with the excluded accounts, so you do not have to do this everytime you run F.01.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec *

Error while trying to run Bex Query -------- Field symbol is not assigned.

Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveen

can u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too

Reporting Issue "Opening Balance values are going to Not Assigned Values"

Hi Friends,
Closing Balance values are perfectly showing but opening balance values are going to Not Assingned Values? I am not able to find it out.
our query is built on PCA Daily Multiprovider.
Pls Help.
Thanks
Asim

Hi Ravish,
Here are the details
Stock values and quantities in the PCA cube of BW never show correctly at an article level due to an opening balance issue. This reduces our ability to report on stocks at moving average price, i.e. anything that actually matches the financial values in the system. The issue arises because stock at the beginning of the year (quantity and value) for any site is only shown against an article of "Not assigned." Stock movements during the year are shown against the appropriate article.(If you have a new site, the will have stock assigned against an article up until 31 December and then the 31 December values are shown against "not assigned" for the next year).
Thanks
Asim

How to pass # (Not Assigned) in open doc url ??

I am unable to pass # (Not Assigned) in open doc URL. I am also try %23 ( encoded form of #) but it show MDX error and when i supply directly # then my WebI report pull all the data i.e. my filter doesn't work. Please give me some way to pass # in opendoc..

http://boseimdev60:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AQgEkeXDfo5PpR_IFC.rse0&sIDType=CUID&sType=wid&sRefresh=Y&mode=full&sRefresh=Y&lsSCalendarYear%2fMonthTo=032010&lsSCalendarYear%2fMonthFrom=032010&lsSInfoprovider (Multiple Required)=ZPUR_C15&lsSPlant(SelectionOptions%2cOptional)From=&lsSPlant(SelectionOptions%2cOptional)To=&lsSPur Doc Category (Optional)=K&lsSPlant=%23
Here Plant=%23 i.e. in last i increase this prompt in WebI level so its work.

Showing as not assigned

Hi All,
In the bex analyzer report, I am seeing values as NOT ASSIGNED and # in text and key columns when there is no data.
I want to see them as blank instead of them,
Can anyone tell where can I make that setting or change.
Thanks In advance!

Hi Pallavi,
I think you can find some VB macro code posted here that will help you to do this...there is no option set in the query designer to blank out the records.
Hope this helps...

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

How can I find photos that are not assigned to any collection?

Hi !
I'm using LR 5.7.1 on a Mac.
When I've retouched raw pictures with PS CC (and do not need the PSD file any longer) I export the PSD (that is in my catalog) as JPG and let it add to my catalog automatically. After that I delete the PSD file. That works fine.
But .... the new JPG file is not assigned to any collection. That's no problem unless I forget to do it manually after that export (and import).
That brings me to my question.
How can I find photos that are not assigned to any collection?
I tried it with a smart collection after I found nothing suitable in library filter. The search criteria I tried are Source -> Collection with any of the conditions. One with an empty value field, then with just a space and so on.
Has anybody a good hint for me?
Thomas

You can also add numbers if you have collections that don't use alphabet characters.

How to get rid of a "not assigned" line in Bex

Hello Experts,
I feed a Cube with two ODS-Objects, one fpr orders and one for items.
ODS1 provides the number of orders and
ODS2 provides the number of items and the charachteristic item_type for the dimension item.
Because the charachteristic item_type is not provided by ODS1 there is a "not assigned" line at the bottom of the table in Bex!
How can I get rid of this line? I want to avoid usong seperate Cubes for Orders and Items!
thanx
hiza

Hi Hiza.
In the query designer restrict item_type to # -> right click on # -> exclude from selection.
Hope it helps.
BR
Stefan

Error--Control indicators not assigned to company code

While creating PO in IDEAS following error is coming.
"Control indicators not assigned to company code"
Pl . suggest the remedy,
Thanks a ton,
Regards,
NB

Goto T code OKKP select your co.code on left side click on Activate components.
in first tab " activate components" activate cost center , order mgmt, comm mgmt etc and save it.
Reward if useful;
Rgds
GIrish Kavital

Account assignment not possible (Asset not assigned to a business area)

HI
While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
I have correctly created asset master and assigned Business area and Cost centre.
And i am not getting any problem in another company code for same asset class.
Please suggest
Bhanu Prakash

Hello
Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
Check the info on the link please
Reg
assign points if useful

"Not Assigned " accounst in FSV

Similar Messages

Maybe you are looking for