# NOT ASSIGNED in Report

Hi Experts,
I've got a report with many master data of a customer. But not always all data are maintenanced. The result is, that instead of blank there's "#" or 'Not assigned" value. How can I change this to blank?
Thanks a lot for your help

Hi Pcrao,
thanks for xour help. But I've got a problem being much more tricky...
E.g. I'vo got a datasource showing only attributes of customer, like name, telnumber, personal address, etc. The problem is, that not all fields of any  customer are filled.
The result is e.g.
1) Mr. Max Mustermann, Musterstreet 1, 12345 Musterstadt, #
2) Ms. # Musterfrau, #, #,#, 01234/78945,
3) Mr. Juergen Klinsmann, Bayernallee 1, 2222 Muenchen, 01234/78542
You understand my problem?
If I do it like you advise, there will only Mr. Klinsmann showed, but not the others. My wish would be like this:
1) Mr. Max Mustermann, Musterstreet 1, 12345 Musterstadt
2) Ms. Musterfrau, 01234/78945
3) Mr. Juergen Klinsmann, Bayernallee 1, 2222 Muenchen, 01234/78542
Is there a possibility?
Regards Sebastian

Similar Messages

  • Accounts not assigned in report

    Hi, Can anyone help me out?
    What´s the reason because the ammount shown in Financial Statement area equal in Accounts not assigned? This shouldn´t be happening? In advance thanks for your comments
    JoseR

    Hi  Javed, I think I found it !
    Look :
    If I select the check box named  ALTERNATIVE ACCOUNT NUMBER;
    It would show :
    Else ( Check box unselect):
    I was looking for Alternative Account (Field ALTKT) and I do not have any assigned
    Could you please give a look ?
    Again, Thanks for your response.
    José

  • Reporting Issue   "Opening Balance values are going to Not Assigned Values"

    Hi Friends,
    Closing Balance values are perfectly showing but opening balance values are going to Not Assingned Values? I am not able to find it out.
    our query is built on PCA Daily Multiprovider.
    Pls Help.
    Thanks
    Asim

    Hi Ravish,
    Here are the details
    Stock values and quantities in the PCA cube of BW never show correctly at an article level due to an opening balance issue.  This reduces our ability to report on stocks at moving average price, i.e. anything that actually matches the financial values in the system. The issue arises because stock at the beginning of the year (quantity and value) for any site is only shown against an article of "Not assigned."  Stock movements during the year are shown against the appropriate article.(If you have a new site, the will have stock assigned against an article up until 31 December and then the 31 December values are shown against "not assigned" for the next year).
    Thanks
    Asim

  • FSV not assigned accounts in Report Painter

    Hi
    I created one report through Report painter for Balance display.
    After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
    As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
    Thanks

    Hi,
    Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
    Regards,
    Gaurav

  • 'Not assigned' Value is appearing in Report?

    Hi Folks,
    Let me go through the whole scenerio so that it would be easy to answer you people.
    There was one IO by 0CAT_GROUP for this there was already data was available.Due to some changes in the requerement we have created one navigational atteribute to the above mentioned IO ie ZCAT_TYPE.To update the cat group based on the cat type we have written a routine in the trafer rule of the 0cat_group saying if another fields 0cat_cat is '1','2', and '3' then it is 'preventabl'
    and if it is '4','5','6' then it is 'Non preventable'.If it is other than above two then it is 'Others'.
    1.Our routine is working fine.As per the code but we are getting in the report another field called 'Not assigned'.
    2.As per the our code we should not get  'Not assigned'?
    3.As per my understanding as already 0cat-group is having values which not fallling any of the above three catagories(Preventable,Non preventable and Others) that is being called in the report as 'Not assigned'.
    Please clarify my doubt?
    Points wil be definitley assigned.
    Thanks,
    Vasu

    Hi,
    Values coming from Master Data
    1)Preventable
    2)Non Preventable
    3)Othrs
    4)......(which is blank)
    In 4th case you write simple routine, if BLAN then fill "NO VALUE" else pass values as it is. So you will get some value, anyway this is Master data in next time the data will come for 4th one then it will load to that field.
    Thanks
    Reddy

  • Product hierarchy is showing 'Not assigned Materials' in Bex Report

    Dear Gurus,
    I have loaded product hierarchy to 0material from 0PROD_HIER_LPRH_HIER successfully. In Bex report if i use product hierarchy nothing showing to me and it is showing message in one row like 'Not assigned Materials.
    If i remove the Hierarchy i am able to see all materials in the report.
    I have searched in sdn but i didnt get any help.Please help me in this issue.
    Thanks & Regards,
    chandu

    Hi Ravi,
    I have run the Hierarchy change run for 0material.but again it is showing same message 'not assigned materials'.
    Regards,
    chandu

  • Not assigned value in Bex report

    Hello experts,
    One of the value in the BEx report is appearing as not assigned. What could be the reason?
    Thanks
    SP

    Hi all,
    In the back end system 0sales_office is attribute of 0customer,
    Then I have activated the 0customer master data and done attribute change, I have such display at BEx reporting
    customer        sales office(key)       sales office(text)                      Sales      
    9876554               0010                         Michigan                         USD   4567
                                    #                            Not Assigned                  USD   2563
    although I expect to see
    customer        sales office(key)       sales office(text)                      Sales      
    9876554               0010                         Michigan                         USD   7130
    Is there anything I do miss?

  • Display attribute incorrectly reported as "not assigned" in BEX Analyser

    Hi SCN
    I have a simple BEX query on a master data infoobject which displays the object key and several display attributes.  One of the attributes is often reported incorrectly as "not assigned" although the behaviour is erratic and can sometimes be correct from day to day.  I have checked the master data table and there should be a value ... when I run the report in RSRT, the attribute is correctly reported !
    I have checked the infoobject in RSRV for errors (all lights are green), deleted the cache and set the report to not use caching in RSRT but the attribute is still frequently "not assigned"
    all very weird ... any thoughts ?
    regards
    Ian

    Hi Ram
    no error as such, the report displays the attribute as "not assigned" ... this image shows the query and the RSRT output
    regards
    Ian

  • Sd reports shown not assign value, how to assign

    Hi, I  don't have solved one issue
    sd reports the one payer values not shown it shows # not assigned, the data will come in psa level,
    we have to do cube level data delete
    activate md
    run dtp s
    we have to do and not solve the problem

    learn to give points to those who are trying to help you..
    so that more people will try to help you

  • Items in project report(query) are listed under the "not assigned" (column)

    Hi All,
    Items in project reports (query) are listed under the "not assigned" (column name) Why it is so ?
    Start query : project reports & ask for period April 2008 (Period from/to). .
    You will see items listed under  Not assigned WBS Element (column name)
    If you choose for a period of April until June 2008 then you see more items under u201Cnot assignedu201D .
    Items should be under Assigned (column name) & not under the Not assigned (column name )
    Any suggestions highly appreciable.
    Thanks.

    Hi,
    How are you displaying the ITEM field in the BEx query designer? Is it displayed with "Key and Text"? If so and if the text is not loaded for this master, this may happen.
    Regards,
    Yogesh.

  • If I use Nav. Attribute X---Y in report, some of the values not assigned.

    Hi All,
    We r using  a navagational attribute like X-Y  in our report. X is Char. Y is Attribute. If I use Nav. Attribute X-Y in report, some of the values r not assigned. If i use display attibute Y under charectiristic X , I am getting correct values. why?
    Thanks in Advance

    Take the master data table name...go to se14...give the table name..click Edit...choose option Activate and adjust database..
    Run attribute change run
    Check and revert.
    Regards
    Gajendra

  • Regarding planning data not available in reports

    HI SdN,
    In my reports I'm populating actual data and planning data.But as of now we have only actual data display's in our report.what we are doing is we are populating data in BW and analysing on the base of the product cutomer (compounded) combination which is coming from r/3.(groups and sub-groups which we are entering at r/3 )
    So our report shows us on the base of groups and sub groups which we are entering at r/3 level.That all is working  fine but our customer wants that planning data is also displays in the reports as of now it is showing not assigned values in report.
    so my question is ,To display planning data for group and sub groups provided by r/3 on the basis of product and customer (though other reports are showing planning data)  , I know that I need to include this compounded infoobject in bps cubes but shall I also need to consider this in the BPS functions?I'm confused here and not sure about this.
    And is that mandatory to have that componded infoobject mapped from underlying ods for customer.Because as of now planning cube is only updated with BPS functions?
    Could you pls advice?
    R

    Hi Rubane
    If the actuals and planning data are in seperate cubes then you will need to create a multi over both cubes to report on them together. However your BPS planning must be done against the same infoobject for you to be able to report on them together. If you are planning against the same IO the groupings from R3 will apply.
    Also include the infoobject 0REQUID as a characteristic restriction and restrict it to variable 0S_RQMRC (Most Current Data)
    Josh

  • How to pass # (Not Assigned) in open doc url ??

    I am unable to pass # (Not Assigned) in open doc URL. I am also try %23 ( encoded form of #) but it show MDX error and when i supply directly # then my WebI report pull all the data i.e. my filter doesn't work. Please give me some way to pass # in opendoc..

    http://boseimdev60:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AQgEkeXDfo5PpR_IFC.rse0&sIDType=CUID&sType=wid&sRefresh=Y&mode=full&sRefresh=Y&lsSCalendarYear%2fMonthTo=032010&lsSCalendarYear%2fMonthFrom=032010&lsSInfoprovider (Multiple Required)=ZPUR_C15&lsSPlant(SelectionOptions%2cOptional)From=&lsSPlant(SelectionOptions%2cOptional)To=&lsSPur Doc Category (Optional)=K&lsSPlant=%23
    Here Plant=%23 i.e. in last i increase this prompt in WebI level so its work.

  • Showing as not assigned

    Hi All,
    In the bex analyzer report, I am seeing values as NOT ASSIGNED and #  in text and key columns when there is no data.
    I want to see them as blank instead of them,
    Can anyone tell where can I make that setting or change.
    Thanks In advance!

    Hi Pallavi,
    I think you can find some VB macro code posted here that will help you to do this...there is no option set in the query designer to blank out the records.
    Hope this helps...

  • Data is not available in report

    Hi Experts,
    i have purchase order report created on multiprovider.
    Particular vender number data not showing in report but its available in Data target.
    suggest possible cusses?

    Hi Raj
    Check if you have any additional restrictions in the report which are filtering out the vendor numbers.
    If you are using a master data object make sure the master data is activated.
    Also check the assignment for the vendor infoobject in the data target/multiprovider.
    Regards,
    Ninad

Maybe you are looking for