"not authorized" after editing and publishing

Hi,
I was reading a very usefull document - http://scn.sap.com/docs/DOC-36366, and I wanted to edit something (it mentioned tCode for product instead for order), so I clicked on "edit", edited, checked "minor change" and clicked on "publish".
Next thing - I recieved error message that I'm not authorized to view this content, the document disappeared from my bookmarks and if I go directly to its URL which I had by luck - I get "not authorized" message again.
HELP

Hello Yulia,
don't panic.
I guess, the document went into the moderator queue again, since you re-published it (correctly). So no need to worry, it will be available, when a moderator has looked at it and gave it a thumbs-up again.
When you look at the people-tab of the space, this document is in (I hope, you know where is was *g*), you can see the moderator-list. You can mention them here (by @ and their name or by just copying their profile-url and pasting it, if you want a feedback, if the document is in their queue.
Regards,
Steffi.

Similar Messages

Contribute CS3 embeds the contents of SSI Includes into page after Edit and Publish

I have tried every possible way to figure this out but it
seems as though no one has this problem or a solution...
My Dreamweaver CS3 Template based files that have SSI
Includes placed in a "non-editable region" of a template and/or
nested templates are continually embedded, merged, or hard-coded (I
used those keywords for anyone else who might be searching for help
on this frustrating issue) into the page after it has been edited
and published with Contribute CS3 for Windows.
After many, many, hours and days rebuilding templates
(thinking that it was my code), experimenting with .htaccess
include_path variables, and cursing this application, I have come
to one conclusion - if I put my includes within "editable regions"
in the templates or the template based pages, edit and publish the
page with Contribute - then the page is saved normally, with the
includes intact and not embedded within the page. This is of course
not necessarily desirable!
I have tried using various types of include directives like:
<?php include('footer.inc'); ?>
<?php require('footer.inc'); ?>
<?php virtual(footer.php'); ?>


All Includes are merged into the template-based page after
the page has been edited and published with Contribute - if they
are in "non-editable regions"!
Please, someone point me in the right direction - if it's
calling Adobe's Help line, or posting the files or whatever. I
can't finish this project and hand off to the client until this is
resolved.
Andrew

Hi,
I'd be reall interested to know if you got anywhere with this as I'm having the same problem.
The article referenced further down this thread is no longer available either.
Any suggestions or advice on this issue would be much appreciated.
Cheers,
Bill

Changes are not reflected after editing and saving the chart in th WAD 3.5

Hi all,
I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
Please help.
Thanks
Rani

How r u changing the graph??
Hope you are doing a right click and selecting Edit Chart. Click on Refine.
Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
Hope you are following these steps.

"You are not authorized to edit the chosen object" in LWE

Hello gurus,
I want to edit the standard HTML content that is delivered with Life and work events. Before editing this, i want to copy the ESS HTML content package to a custom folder and then edit and modify as per my requirements. i navigated to Life an work events - US --> HTML content --> Content Package --> ESS HTML Content Package and clicked on Open. I am getting the error "You are not authorized to edit the chosen object".
How do I access this content without any error? Do I need any specific roles to be able to access this content? i need to access this content to be able to copy and paste it to a custom folder.
Also, when I tried copying at the ESS HTML content Package level and then pasting it into a custom folder, i get a popup with all empty rows and columns and there are two buttons OK and CANCEL.
How do I copy this ESS HTML content package to a custom location?
please suggest .
An update: Since I could not open/edit the standard ess html content package, I created my own HTML files from scratch and created a content package and uploaded my html files and folders into the custom content package. Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events.
How do I achieve this? What else is needed to call these html pages from the event?
Please suggest and any help is really appreciated.
Thanks,
Maria Kutty Somori.....
Edited by: MariaKutty on Jun 24, 2011 1:01 AM
Edited by: MariaKutty on Jun 24, 2011 1:05 AM

Hello Maria,
I too tried earlier for copying these HTML content and paste them in my custom folder and then modify them....
But I too faced the similar error as of yours.
I dont' know the reason why this happens....I guess SAP does not allow you to modify there content.
Nyways, there is always a workaround solution....
You are spot on when you say...You are creating new HTML files from scratch.....but you dont' need to create from scratch !!
You can still get these files.
1. Check Directory Structure : Navigate to Life and work events - US folder in GP design time -> HTML Content -> Content Package -> ESS HTML Content Package and click on "Open" then click on content tab..
Here you can view all the content files supplied....additionally please note that there are two folders "CSS" and "Images".
If you wish to create your own content from modification to SAP supplied content...then make sure in your own package these folders are also with similar directory structure.
2. Come out of gallery and as an end user Open your life and work events page that you wish to modify.
For e.g. ESS -> Life and Work events -> My First Days -> New Hire Checklist.
3. Right click on HTML page and click on Properties.
4. Copy the Address/URL of page.
It will be something like :
http://Host:Port/gpcore/ctpkg/094BABAA643911E091070000014B8BFA/NewHireCheckList.html
5. Access above URL directly from Browser (In new window) and refresh that opened page. Check that all the content is visible and in correct font and format.
6. Click on "Page" -> Save As...from your browser tool bar.
7. From "Save as type" select HTML complete....
and save the page.
8. As a result you will get an HTML file and a folder.
Inside the folder there will be your images and CSS....Now you know how to make your own content.......
Very Important : Please note that directory structure of your CSS images and HTML must be similar to what you saw in point 1.
And you can easily modify your content...accordingly...
Now the second part of your question :
"Now, I want one of the pages that I created to be displayed as the start page of one of my life and work events. "
I hope you refer to something that is given by SAP in the form of " ESS -> Life and Work events -> My First Days -> New Hire Checklist"..
As you can see "New hire checklist" is the First link available under My first days...thus by default it gets displayed when user clicks on "My first days"....
Is this that you want to mimic ?
Well for that your process in GP design time must look like this :
http://img594.imageshack.us/img594/7/imageqw.png
For eg. Create a new callable object with name "New Hire Checklist" of type : "Content package"..
Wizard will help you with the rest.
Revert back if you face any issues.

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

In SharePoint 2013, some of the userswith contribute or full control rights are not able to edit and save office doucuments to SharePoint library.

In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
When they try to save they are getting following error:
1. https://.....pptx is read-only. Do you want to save changes to a different file name?
2. Project canot access "https://...."
Try one of the following
The file may be temporarily open by another program. wait a momoment and try again.
A file with the same name may already exists. Save it with a different file name.
You may be trying to save to a read only folder. Save to a different folder instead.
Please help me with this issue.
will be waiting for any suggestions or solutions.
Thanks
Krish
99

Thanks again for quick response.
I have requested users who are having this issue to try check in/ check out, and share the results.
Result with CheckIn/CheckOut:
User was able to check out but no edit option.
'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
Please advise.
Thanks
Krish
99

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

CS6 photoshop not found after downloading and putting in serial number

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!

Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me!

Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!

check your duplicate post. there are two responses.

Iphone 3gs will not activate after restore and update

my sons iphone 3gs will not activate after restore and ios update.
phone keeps saying no service but worked fine before restore and update any ideas ? thanks

Sorry. The jailbreak is undoubtedly the root cause of your problem.
It is not always possible to repair the damage done by jailbreaking.
Try searching google for an answer, but be prepared to just buy a new phone.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

HT201263 iphone 3gs will not activate after restore and update?

Please help my iphone 3 gs will not activate after restore and update.

If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

Live stream lag after unpublish and publish

I am sending a live stream over the web. I'm testing its performance and reliability, and I've noticed that after unpublishing and publishing the stream again, the video becomes very laggy - about 1-2 fps. It happens when the player has buffer bigger than 0. When buffer is set to 0, everything is ok, and after a short break (the moment when stream is unpublished), video is being played normally, like before the break (fps ~25). What is causing the problem, and how can I resolve it?

Are you using Adobe Flash Media Live Encoder? or some other encoder... testing on your machine or remote server?
You might also check over at that Forum:
http://forums.adobe.com/community/flash/flash_media_live_encoder
Most likely you will be asked for the encoding log. So first review the log and see if anything catches your eye.
Also we'll need details like type of machine you are using, CPU and RAM etc.
What are the encoding settinging? display dimensions, bitrate, encoding format, audio and video?... etc... all the config settings.
What type of cam, what are you using for a server... FMS, Wowza, Red5? or streaming to UStream or some service like that?
Best of luck,
Adninjastrator

DVD authoring after editing project with FCP X

FCP X has extremely limited DVD authoring options within it. Can't put more than one short movie on a disc, only two menu templates to choose from, etc. So my question is what do I use to author a DVD after editing projects with FCP X? I know I need to use Compressor to set chapter points, etc., but what do I use to build the DVD menu and burn the DVD? I certainly hope I am not limited to iDVD only, which is not really a pro application, and I gather that DVD Studio Pro is no longer being sold. Amazingly, I asked this question at a One-to-One session at an Apple Store and the guy there suggested Adobe Encore ... I was totally shocked! Does anyone have an answer to all this?

Encore is very good, but you have to buy PPro to get it, you could look on eBay for a copy of DVDSP. It does look like Apple will not be offering a Pro Level DVD authoring package anymore, it's a shame as DVDSP works very well still and they could have just offered it as a standalone.

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

"not authorized" after editing and publishing

Similar Messages

Maybe you are looking for