Not auto-connecting on restart or after sleep - help

I have an Apple Airport Extreme router configured with 128 WEB.
When I start up my MacBook I have to go up to the Airport status and select the network. Since I have already entered and saved the password, it connects and then all is fine - until it sleeps or I shut it down. Then I have to go back up to the status icon and reselect. There are no other wireless networks detectable.
Now what is weird is that I have an intel iMac and it always connects. When I go to the sys prefs > Network on my iMac it says by default join Automatic. But on the sys prefs > Network on my MacBook it only gives me the option of joining a specific network. I tell it to automatically join that network but it doesn't do it!
Both OSs are up to date.
Any thoughts?

That happened to me on both my macbooks i just found a fix go to your network settings and have it only connect to prefered networks then ad your netowork 5 times this causes the computer to keep rescaninggng

Similar Messages

  • Cannot auto-connect to wi-fi after sleep

    I'm having troubles to reconnect to wi-fi once iPhone 3G goes to sleep mode (once auto-lock is activated when not being used for 1 minute).
    This started to happen after 2.1 update.
    My son's iPhone 3G which is still running version 2 firmware does not suffer from this.
    We have a Belkin wi-fi router in house and when connected the signal strength is full all around the house, but whenever I "wake-up" my iPhone from Sleep mode, it instantly connects to 3G and never auto-connects to wi-fi (even when I'm standing next to the router). It can see and finds the router (under wi-fi settings) but is refusing to connect to it even when I select it.
    I have to force this by switching on and off the airplane mode, then it reconnects to wi-fi instantly with full strength.
    This useless excercise is so frustrating, especially considering that local provider Telstra is charging $2 per MB for casual use
    of data on their 3G network and my iPhone is just happily eating up costly 3G bandwidth when I have a 4 mbits/sec internet connection over home wi-fi network.
    Anybody else noticed this after 2.1 upgrade ?
    Router is configured for WEP encryption, I've already rebooted my iPhone and the router.
    Cheers

    I noticed that it takes a few seconds longer to reconnect to wi-fi after sleep, but it has consistently connected.

  • Powerbook g3 will  not auto reconnect to iMac airport after sleep

    iMac is a late-2006 intel, airport extreme. I'm internet sharing. If the powerbook sleeps, it will not auto-reconnect after waking. I can't even enter the password to reconnect; it displays an error message. I have to turn off-and-on the iMac's airport, and then the powerbook auto-reconnects.

    Welcome to the discussions, Dan!
    If the powerbook sleeps, it will not auto-reconnect after waking.
    The AirPort Extreme is "always on", there are no "sleep" related adjustments on this device. The "sleep" issue is with your powerbook or the operating system that the powerbook is using.
    Suggest that you post in the PowerBook Forum for your specific question.

  • AirPort does not auto-connect to existing network after waking from sleep

    ...but I can easily connect it manually. I read the FAQ on this subject and followed the resetting steps in system preferences/network (the procedure was specific for Intel iMacs-but I did it anyway)
    It did not help. The flaw just occurred a couple of days ago, after a year of flawless operation Please help.

    Solved! I trashed the internet connect preference in the library, and it worked!

  • TS3276 iCloud email on OSX 10.8 does not connect to the server after sleep

    iCloud email on OSX 10.8 does not connect to the server after sleep.  The only way I can reconnect the iCloud email is to restart the computer. Does anyone have any ideas how to resolve this issue?

    I would suggest you try opening "Mail">click on "Mailboxes" in the Menu Bar> and select "Rebuild" from the list.  That may solve it.

  • Iphone 4s cannot auto connect to home wifi after updating to ios 6.1.2

    My iphone 4s will not auto connect to my home wifi after updating to IOS 6.1.2.  I can manually connect to my phone to wifi but it will get disconnect if I'mnot using the phone. Any way to reslove?

    Once the phone goes into sleep mode, it is supposed to auto disconnect from wifi to save battery. Are you saying that once you wake the phone up it will not auto connect at that time?
    Suggest you try and forget the network, then go in and try the reset network settings again and then try to rediscover the network and connect again. Have you tried to do a reset of the phone, but holding the sleep/wake and home buttons together until you see the Apple logo and then release?

  • My iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?

    my iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?
    Thanks

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Firefox not working when PC wakes up after sleep but Chrome is working.

    When laptop wakes up from sleep, already opened tabs in Firefox are not getting connected to internet. After two minutes opening a new Firefox window is connecting to internet. But this problem is not happening with Chrome.

    When you are doing this, set the drive to never sleep, slider completely to the right and display sleep to something like five minutes. Or just hit Control-Shift-Eject, to sleep the display. Uncheck "put the hard disks to sleep..." That said, the firmware on the externals may be spinning them down. But this shouldn't be happening if they are being written to.
    System Preferences> Energy Saver.

  • Iphone Wi-fi not auto connecting (this time)

    Usually it does every day I come home from work, it will auto connect to my wireless network without me having to do anything.
    Today I was down the block and out of range of my wifi network, it tried to connect to another wifi network in which i denied access to it. Then it switched to "E" edge.
    When I got home, right next to the wifi router, it was still showing an "E", so I was wondering why it didnt auto connect to the router. - So i went into general settings, and it searched and found my network, and I tapped the SSID Name of my network and joined with no problem.
    My wifi is encrypted and you need a password to access it, everything is stored in my iphone, and it connected.
    Was wondering why it didnt auto-connect, especialy if my setting in the iphone is set to auto connect to my trusted network..
    weird.. Im thinking, because I hit deny to not connect to that network down the block, that it was also denying my Trusted network when I got home.
    Possible bug?

    Try shutting down the iphone by holding the sleep/wake button at the top until you see slide to power off. then hold to turn the iphone back on.
    If the iphone does not auto-connect.
    You might want to try the following.
    go into settings > wifi
    choose your network and tap on forget network.
    turn the iphone off and back on again.
    then set up your network connecting again.
    Hope this helps

  • TS1398 Since I upgraded to iOS 7.0.2 my phone will not auto-connect to the home WiFi network.

    I upgraded my iPhone 4S to iOS 7.0.2 and now my phone will not auto-connect to the home wifi network.  Each time I leave and return to within range of the network I have to remember to manually connect, otherwise it continues to use 4G for data.  The credentials are saved (all I have to do is tap it to connect) but just won't happen automatically any more.
    Is anyone else seeing this problem?

    Tried the reset multiple times. No go. Before the IOS 7.0,2 update my devices were connecting to home WIFI eventually.

  • When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

    When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

    just an update on the situation....
    the problem is solved. after trying everythng, at last i did a reset on my linksys e3200 router - and BANG!!!
    airplay works.
    hope this helps someone else.

  • Any way to NOT auto connect with wifi?

    I connected to a WiFi that was near me. Turned out to be a Jack-In-The-Box wifi which requires you to be in the restaurant looking at their tv screen for a code to type in.. well, anyways its really annoying now when trying to get online and it hooks up to that signal!
    Anyway to make it not AUTO connect to ONLY that WiFi signal?

    When connected to the network tap on Settings/WiFi, then the arrow to the right of the network name, then "Forget this network"

  • Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac help?

    Wi-fi connection does not auto connect on 21.5-inch mid 2010 imac running OS X 10.8.3 (12D78) help?  My wife's imac with OS X 10.6.8  has no problem getting on wi-fi automatically as well as my Ipad 2 running iOS 6.1.2

    If you get a green light then you did not do a factory reset - you must disconnect all wires and follow the instructions above - you will end up with the Extreme blinking yellow - then use the Airport utility to set up the Extreme - you can put in your own names for the network, device etc. - when it comes to the passwords you can use ones of your own choice - it is not asking for the old one - if it is then it was not reset completely - try to reset again if necessary - it may take more than one try - if it still asks for a password then use "public" - it is the default - once you have set it up with your new information, and you have a green light, test the connection with your computer - if you can access the internet then you are all set - then try to a use the Apple TV with the new password - if the computer still asks for a password, then it is asking for the computer password and not the extreme or network password - I can't help you with that - you would have to ask that question on the iMac discussion group.

  • Turbo will not AUTO CONNECT to my car's blue tooth.

    Turbo will not AUTO CONNECT to my car's blue tooth. I have to manually do it each time I get in my car. HOW DO I AUTO CONNECT IT?!
    thanks

    No, Hyundai Veloster.
    Funny, cause I did see the forum on a subaru.
    It's connecting... I just have to do it every time I get in my car. I had no problem with the razor connecting automatically.

  • Wifi is not auto connect after resume from sleep

    I keep my Mac Book Pro up-to-date with software updates.
    I recently update to OS X 10.8.3 (12D78).
    Since then when I open my laptop after closing it and put it to sleep the wifi connection does not re-connect automatically.
    I have to click on the wifi sign near the clock and select the network to connect to.
    How can I make it connect automatically like it used to?

    Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always - in no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

Maybe you are looking for

  • Missing Sounds in Logic 8

    Very peculiar happenings in the world of Logic today. Sounds which were there before have stopped working, or playing different sounds. e.g. Strings play piano. I haven't mucked with anything - it sounds to me like preferences or library issues? Is t

  • De-interlace Filter not working with MacBook Pro

    Anyone know about or experience anything similar? Ever since I started using FCP HD on my new MacBook Pro the Flicker and De-Interlace Filters cause severe video defects in the clip that I apply them to. Perhaps something to do with Intel chip? Any h

  • Infocube monthly report

    Hi Friends, We have a scenorio of creating a weekly and monthly  trend reports which are open for that week and month. Flow of data loading is from ODS to Infocube( Trend) , Every time when we laods data to ODS current week will be getupdated from sy

  • Context menu not working outside of JDev

    Hi all, RTFM replies welcomed, although I couldn't find anything. I have a very simple application (ADF BC + ADF Faces, 11.1.1.1.0). On one page, I have an af:table that lists departments; there is a context menu that allows me to right-click a row a

  • I locked my iphone and its telling me to connect to itunes and i did but it doesnt say anything about unlocking it. what do i do?

    locked my iphone and its telling me to connect to itunes and i did but it doesnt say anything about unlocking it. what do i do?