Not aware of system readiness check - SAP Note 817920.

Hi,
I am not aware of system readiness check SAP Note 817920.
Can you please let me know the procedure do it?
And also I am not able to log on http://server:port/rwb in XI server.
please suggest me.

hi
1. if you want to look this sap note SAP Note 817920 for this you must have market place user id password
To check SAP Notes go to http://www.service.sap.com/notes
2. And also I am not able to log on http://server:port/rwb in XI server.
r u able to login into xi server if yes then u r entering wrong id adn password..if no then check for user id and password is it valid ?
Thanks
Kunaal

Similar Messages

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?

Automate SAP System Health Checks using eCATT

Hello Mates,
Can somebody throw light on the possibility of Automating SAP System Health Checks Using eCATT ?
Are there any readily available scripts within? If so from which version of SAP? or, have they to be custom developed?
Thanks in advance for your time and responses.
Best regards, MAN0J

Hi manoj,
Examine this ozz note:
131561
see this links
http://www.sap.com/asia/industries/pdf/auto_fin_HC%20Customer%2026jun.pdf
http://whitepapers.silicon.com/0,39024759,60044324p,00.htm
thanks
karthik

Taking time data from external system(KRONOS) into SAP

Dear Friends,
I have to intergrate my time managemnt to time recording machine(KRONOS) am not aware about that it's sap certified or not .How we can access the data from that machine and insert in sap tables that means we have to communicate sap to non sap system.I don't have to use the BDC because i have to update our table according to machine shall i go for IDOC and EDI.In that case which IDOC or EDI i have to use .I have to create the INBOUND interface for that .Kindly help me am stuck
thanks
sandeep dabral

Hi Sandeep,
You require a abap guy along with a basis person. Below steps are required.
Step 1: The third party ll specify the file format in which they are going to send the data.
Step 2. You need to check with the basis or a third tool to upload the file into SAP application directory tcode al11.
step 3: Then the ABAP guy will write a interface program using this BAPIs to upload the data in to catsdb.
Step 4. Then functional testing and bug fixing and finially sheduling the inteface job in Production.
Br/Manas

Send mail from SAP system to another SAP system

Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

Hi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY

To send an mail with external attachment check this one

first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv

Then include that report in the following report and copy the same code and paste it there

*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan

Call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException

hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
Kfir

Hi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta

System Monitoring - add SAP PI 711 system

All,
I'm facing problems when I want to add the ABAP stack of my SAP PI 7.11 system...
I use Monitoring Setup Guide (CEN SAP NetWeaver 7.0 EhP 1, SPS 08) to do my setup --> Entering Monitored ABAP Systems with Release SAP NetWeaver 7.1 in ST03G.
Using transaction RZ21--> technical infrastructure --> Configure central system --> create remote monitoring entry.
Next, I choose for DualStack for the component type to be monitored. I fill in all the necessary data and save the entry.
Nothing happens and I do not see the system appearing in the system overiew list.
For single-stack ABAP systems, no problems appear and I can add them.
Please advice.
Thanks.

Dear Dimitri,
The problem is that these products
01200314690800000134 -- 9 -- I -- C
01200314690800000134 -- 34 -- I -- C
These products will need to be reverted to S ( SAP BASIS) from C (NON_SAP BASIS)
Since these are primary keys, you will need to copy and change the + existing record, and then delete the old one.
Once this is done, you will have to perform the following:
Call transaction SMSY. Chose System Groups and Logical Components.
Expand 'Logical Components' - 'SAP NETWEAVER'. Expand the product
instances 'Mobile Infrastructure' and 'Process Integration'. For all
logical components that have systems repeat the following procedure.
1. Check if the logical component is used in solutions using the where
    used button. If no, you can continue with the next one.
2. If yes, note which systems are assigned to which role.
3. Go to change mode and remove the systems from the logical component
     by selecting system SPACE with the value help.
4. Save. Check if a warning says that System monitoring is active.
5. Add the same systems again.
6. Save.
7. If system monitoring was active in a solution the customer should
    run the system monitoring setup for the solution again.
If you are not comfortable making these changes, you can raise a message with SAP.
However once this is done, then the SIDs will be offered and selectable.
Regards,
Paul

Exchange 2013 SP1 readiness check failing

Trying to install our first Exchange 2013 SP1 server on Windows 2012 R2 in our datacentre, the readiness check fails with:
Error:
The Active Directory schema isn't up-to-date, and this user account isn't a member of the 'Schema Admins' and/or 'Enterprise Admins' groups.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.SchemaUpdateRequired.aspx
There are many more errors relating to Enterprise admin rights etc.
Please note that:
My account is Domain admin, Schema admin and Enterprise admin member, it always has been.
I tried the built-in AD Administrator which of course is part of the groups as well, no difference.
Active Directory is at 2008 R2 for domain and forest functional levels.
I tried rejoining the new Exchange designated server to the domain
I've installed RSAT-ADDS, the Managed API 4.0 and all the other windows roles via powershell
There is a local domain controller that is a global catalog server on the new Exchange server subnet
I tried running the Exchange Setup on a different server on the same subnet as where the active 2010 Exchange server resides as well as the FSMO AD role holder resides, this works fine. I even did the AD prep from there no problem, that made no difference
on the datacentre server
AD replicates fine between the FSMO role holder and the Datacentre (no errors in dcdiag or repadmin /showrepl)
This error is in the event log:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
6724
Get Servers for domain.local
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0475315. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table

So I decided to re-install the OS, worked perfectly now. Only difference from before would be:
SCCM hasn't pushed SCEP 2012 to the new build of the same server yet
The original server was installed in a different AD site and then it was physically mode and reassigned to an new AD site and subnet
I might have installed the pre-reqs in a slightly different order (RSAT-ADDS, all the IIS etc things via powershell
and then the UCM API 4.0. (saw few comments that the order of how you install them matters in other forums).
10 or so Microsoft Windows updates haven't installed on the new OS build yet.
Other than that, its identical. But if its not broken don't fix it, perhaps the above can help someone else though.

SPL document screening. Outcome of system/user checks

Could anyone explain the differece in the following four "outcome of system/user checks:
       SPL Check: OK (No SPL Entries Found)
1      SPL Check: Not OK (SPL Entries Found)
6      Status Check: OK (Not Blocked)
7      Status Check: Not OK (Blocked)
Thanks.

Hi Aditya,
The answers to your questions could depend on several factors, including how the initial screening of partners was performed and whether or not the SPL services blocks incoming documents or not. The 'SPL Check" may be from using the simulation feature or it may be due to a lack of initial screening of a business partner. As you can see there are plenty of variables involved.
So the best answer I can provide is the following:
Go to 'help.sap.com' (leave off www).SAP Business Objects tab.
Select GRC solutions.
Select Global Trade Services.
Choose appropriate version, then select 'Application Help' in the desired language.
Use the search feature at top or the menu section at left to look up these processes and statuses.
This should help you some at least until someone else could perhaps provice a more specific answer to you here.
Cheers !
-Greg

System should check chepter id when i am creating the excise invoice.

dear sir.
when i am creating the excise invoice in J1IIN , system should check chapter ID is maintained are not for the material in J1ID.
if chapter id is not maintained in J1ID for the material, system should give error or warning message when i am creating the excise invoice in J1IIN.
Please help me out this issue.
regards
jrp

In fact, when you are creating billing document, system will give a warning message that chapter id is not maintained for that material and the duty values will be zero in billing document.
As I dont have access to SAP, not sure on the warning message number. Try for a material without maintaining the chapter id in J1ID, note down the warning message number and convert it into an error message if possible.
Alternatively, you can try with the user exit J_1I7_USEREXIT_EXCISE_BEF_SAVE to meet your requirement.
thanks
G. Lakshmipathi

Source System changes from SAP System to BI Warehouse on ECC activation

We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.

Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira,

Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
Is there any known fix for this issue?

Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
The exact error is...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

Original System set to SAP???

Folks, I am not sure if this is the right forum for my question, could not locate a basis forum.
Anyways, the problem I am facing is I have a reserved namespace /ABC/, whenever I create a program /ABC/XYZ through SE38 and try to associate it to a transport request, I get a warning message "Original System set to SAP" and have a repair task created under the request. In my view the objectes in the reserved namespace should behave similar to 'Z' or 'Y' objects while associating with requests i.e. should have a "development / correction" task. Do you know what am I doing wrong here?
I have checked the help and my system is configured as suggested in the help.
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/frameset.htm
Appreciate your help.
Thanks

> Folks, I am not sure if this is the right forum for
> my question, could not locate a basis forum.
>
> Anyways, the problem I am facing is I have a reserved
> namespace /ABC/, whenever I create a program /ABC/XYZ
> through SE38 and try to associate it to a transport
> request, I get a warning message "Original System set
> to SAP" and have a repair task created under the
> request. In my view the objectes in the reserved
> namespace should behave similar to 'Z' or 'Y' objects
> while associating with requests i.e. should have a
> "development / correction" task. Do you know what am
> I doing wrong here?
>
> I have checked the help and my system is configured
> as suggested in the help.
> http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b
> 4eb711d182bf0000e829fbfe/frameset.htm
>
> Appreciate your help.
>
> Thanks
Found a solution to this issue.The issue is with the system change option. The package that I was using a software component that had an attribute "Restricted Modifiability" . I changed the software component to one that was modifiable to solve the problem.
Thanks

Readiness check sproxy connection test issue ?

Hi Guys,
we are doing readiness check on the xi system and we went with the TR SPROXY and there we performed connection test as part of readiness check and ran 4 reports.
The last 2 reports SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are not working. The connection to the integration builder works fine.
According to the readiness check document we shld get a ok response when we execute these 2 reports. any help would be really appreciated
Thanks,
srini

Hi Krishna,
we have dev environment and everything is working fine and the results of all the reports are ok. we are building test and during readiness check we have this problem.
we ran the CTC tool on PI 7.0 and we have all RFCs automatically and all are working fine
In dev i have only 1 HTTP connection - ie INTEGRATION_DIRECTORY_HMI. I dont find any other HTTP connections
anyhelp would be really appreciated
Thanks,
srini

Not aware of system readiness check - SAP Note 817920.

Similar Messages

Maybe you are looking for