Not being offered update from Build 10041
Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks
Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks
Just today a new build 10074 has been released.
Its ISO is also available to download.
http://windows.microsoft.com/en-us/windows/preview-iso-update-1504
Similar Messages
-
Error when updating from Build 10041 to Build 10049 Error 0x80070012
I've tried using powershell to fix mail but it comes up with
Get-appxprovisionedpackage : DismInitialize failed. Error code = 0x80070012
At line:1 char:1
+ Get-appxprovisionedpackage –online | where-object {$_.packagename –li ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-AppxProvisionedPackage], COMException
+ FullyQualifiedErrorId : Microsoft.Dism.Commands.GetAppxProvisionedPackageCommand
Then when I try to install mail, calender, and people
"Something happened and your purchase can't be completed. Error code : 0x80073cffI get this error when inputing
Get-appxprovisionedpackage –online | where-object {$_.packagename –like “*windowscommunicationsapps*”} | remove-appxprovisionedpackage –online
Get-appxprovisionedpackage : DismInitialize failed. Error code = 0x80070012
At line:1 char:1
+ Get-appxprovisionedpackage –online | where-object {$_.packagename –li ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-AppxProvisionedPackage],
COMException
+ FullyQualifiedErrorId : Microsoft.Dism.Commands.GetAppxProvisionedPackageCommand -
Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.
Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply. -
Update from build 9860 to 9879 breaks permissions
After windows 10 applied the update from Build 9860 to 9879, I have experienced a host of problems that appear to be due to broken filesystem permissions caused by the update process itself -:
# Onedrive keeps crashing when asking to configure itself
# Modern UI apps all fail to load with the "application does not support the contract specified" or stating Windows cannot find ""
Trying to fix the filesystem permissions also seems to make things worse -:
# You cannot change/modify permissions at all on C:\Program Files
# Trying to restore the C:\Users permissions as suggested in a Miscrosoft document to fix Modern UI apps causes even more permission problems, such as Internet explorer not functioning. I have had to give my user account explicit full control on the
folder to even be able to use the PC at all.
It would be good if Microsoft could provide a "FixIt" to correctly set the permissions on these locations, but more importantly fixed the update process to not break them in the first place.I did a reinstall which was working OK - until I installed the visual studio c++ runtime(s). I have installed the 2008, 2010, 2012 and 2013 ones but am unsure which has caused this breakage but am now getting the same contract messages and am
unable to launch any metro apps again? -
I was able to download and install Photoshop CC 2014 on my Mac Laptop. I am not being offered the new version on my iMac desktop. Why? I am a member of Adobe Creative Cloud.
Please refer:
http://helpx.adobe.com/photoshop/system-requirements.html
Regards,
Ashutosh -
I am not sure why the CC is not being offered in Pakistan and what is the alternative solution of it.
Hi there
We don't currently sell direct to Pakistan but please check with a local reseller for Creative Cloud purchasing options.
http://adobedealreg.force.com/PartnerSearch?lang=en
Thanks
Bev -
I can not install the update from adobe media encoder
I can not install the update from adobe media encoder for MPeg 2 DVD, it will not install error code U44M2P28
Would you have any screenshots, filename and the exact URL that you used to download Flash Player. Can you also, please provide your system configuration to help us identify the issue.
Thanks,
Anamika
Adobe Team -
My photos are not being rec'd from either Adobe photoshop 10 or 11???
My photos are not being rec'd from either Adobe Workshops 10 or 11? Help. I have always been able to send via emai photos from Adobe 10 never have I been able to send them thru 11??/
Hello dbe.
Please check to see if a borderless paper size has been selected before printing.
If borderless printing is enabled, you may experience a cut off on the outside areas of the image. This is the only way that an edge to edge bleed can be done.
To retain the entire image, the bordered option would have to be used for printing.
Please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
SQL-Server detection/discovery does not work in win 10 build 10041
Hello,
I'm using the default .NET-function to detect SQL-server-instances in the network. It works fine in win xp, win7, win8 up to win 2012r2. It also works in earlier win 10 builds, but it's broken in build 10041.
It's reproduceable with the powershell-call
[System.Data.Sql.SqlDataSourceEnumerator]::Instance.GetDataSources()
On other systems the function call takes about 10 to 15 seconds before returning a list of SQL instances in the network. Under win 10 build 10041 it returns immedeately without any results.
Please fix this problem before the final build!Share: The abiltity to place a link to the feedback-"post" somewhere else ... facebook, twitter, or this forum here.
I've only a virtual machine with windows 10 installed. So it's really annoying, that I have to log on on to check the state or the "me too" count of my feedback-post. Would be great if this post is reachable through the web from other (pre windows
10) machines.
Answer: The ability to reply to the feedback-"post". like "it's solved now", "it does not work with build xxxxx", "i can't reproduce", "we're working on a bugfix" -
I believe it is running an older version of maverick it is 10.6.8 but it will not let me update any further . I added 3gb of ram to upgrade from the original 2gb it came with but still no updates are being allowed Does anyone have any idea why this is ? I am sure the criteria for the upgrade is available so I don't know why I can not up date it?
10.6.8 is Snow Leopard.
Run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
Not able to update from 10.4.11 up to 10.4.9
Hi all!
I am having a problem that I simply cannot figure out!
I am running Mac OSX Server 10.4.11.
My iMac is the 1st flat panel: PowerPC G4 700 mhz.
I know that when I 1st intalled 10.4, that I went to Apple and did all the Updates as far as I could go - which being a non-Intel was 10.4.9.
Just got the daughter a MacBook, and somewhere, sometime while I was figuring out how to share folders, I am now back down to 10.4.11.
I went back to Apple downloads and am attempting to re-update back to 10.4.9.
But! None of the downloads seem to work!
I think I have tried them all...
single steps (ie: 10.4.2, 10.4.3, 10.4.4, etc)
combo updates (10.4.9 tells me I should be able to get there from 10.4.1)
There are so many different downloads!
Universal, Combo, Intel, PPC, Server, etc.
Being as I am a PowerPC and a Server version, I have tried those labeled "Server Combo PPC" first.
It should work, but it is not.
Any ideas?
Anyone know which updates I really should be using?
BTW, Software Update finds me nothing.
Looking forward to hearing from some of you.
All the Best,
AliciaAnyone know which updates I really should be using?
None. Mac OS X 10.4.11 is an update from Mac OS X 10.4.9; the version number is delimited by periods, and each item in the list is treated as a separate number for the purpose of determining what is newer. 11 is higher than 9. The Mac OS X 10.4.9 combo updater will update from Mac OS X 10.4.1, but you're running 10.4.11, not 10.4.1, and there are no free Mac OS X updates available for that OS.
(41379) -
VPN not working after Update from SLS to MLS
Hi folks,
last weekend I updated my Snow Leopard Server following the suggested procedure, installed first Mountain Lion and then OS X Server. Now I have a problem.
Setup:
- Macmini Server located in my private LAN, running SLS as a virtual machine (VMware)
- connected to the Internet via an AVM FritzBox 7270
For HTTP (80) and VPN (500, 1701 and 4500) the ports are forwarded to the virtual machine - everything was working well before the update (access to Website & VPN from both internal and external). The VPN connection is used either with an iPhoen or with my Macbook pro.
The website is still working like expected. VPN service is not working properly anymore. I can access it from internal, but not from external.
So, to make it clear, nothing but the server OS changed in the setup.
Any ideas? Changed ports from 10.6 to 10.8?
Thanks in advance,
Andre
(err, and YES, I have a snapshot of 10.6. - if I revert it's working again, but this can't be the solution)Hi all,
to point out the difference, this is what the logs say....
Connecting from internal, VPN success:
21.06.13 18:12:13,880
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:12:13,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:12:13,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:12:13,921
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:12:13,942
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:12:13,969
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:12:13,969
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:12:13,970
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:12:13,970
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:12:13,970
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:12:14,881
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:12:14,885
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:12:14,886
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:12:14,886
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:12:14,890
vpnd[1210]
Incoming call... Address given to client = 192.168.0.203
21.06.13 18:12:14,918
pppd[1371]
pppd 2.4.2 (Apple version 596.13) started by root, uid 0
21.06.13 18:12:14,923
pppd[1371]
L2TP incoming call in progress from '192.168.0.117'...
21.06.13 18:12:14,931
pppd[1371]
L2TP connection established.
21.06.13 18:12:14,935
pppd[1371]
Connect: ppp1 <--> socket[34:18]
21.06.13 18:12:14,944
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:15,036
pppd[1371]
CHAP peer authentication succeeded for <username>
21.06.13 18:12:15,042
pppd[1371]
DSAccessControl plugin: User '<username>' authorized for access
21.06.13 18:12:15,052
pppd[1371]
Unsupported protocol 0x8057 received
21.06.13 18:12:15,058
pppd[1256]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,058
pppd[1371]
local IP address 192.168.0.103
21.06.13 18:12:15,059
pppd[1371]
remote IP address 192.168.0.203
21.06.13 18:12:15,061
pppd[1371]
l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.0.103), current interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:15,068
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1+:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:17,102
apsd[466]
Certificate not yet generated
21.06.13 18:12:18,103
apsd[466]
Certificate not yet generated
21.06.13 18:12:19,004
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:19,006
apsd[466]
Failed to get client cert on attempt 11, will retry in 900 seconds
21.06.13 18:12:19,066
racoon[226]
IKE Packet: transmit success. (Information message).
21.06.13 18:12:19,067
racoon[226]
IKEv1 Information-Notice: transmit success. (Delete IPSEC-SA).
21.06.13 18:12:19,120
apsd[466]
Certificate not yet generated
21.06.13 18:12:21,802
pppd[1256]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,817
pppd[1371]
l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.0.103), deleted interface setting (name: ppp1, family: PPP, address: 192.168.0.103, subnet: 255.255.255.0, destination: 192.168.0.203).
21.06.13 18:12:21,822
configd[21]
network changed: v4(en0:192.168.0.103, ppp0, ppp1-:192.168.0.103) DNS* Proxy SMB
21.06.13 18:12:21,981
pppd[1371]
Fatal signal 6
21.06.13 18:12:21,982
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:12:22,011
vpnd[1210]
--> Client with address = 192.168.0.203 has hungup
21.06.13 18:12:22,022
UserEventAgent[17]
Captive: [mySCCopyWiFiDevices:162] WiFi Device Name == NULL
21.06.13 18:12:23,837
apsd[466]
Certificate not yet generated
21.06.13 18:12:23,839
apsd[466]
Certificate not yet generated
21.06.13 18:12:25,148
apsd[466]
Couldn't find cert in response dict
21.06.13 18:12:25,148
apsd[466]
Failed to get client cert on attempt 12, will retry in 900 seconds
21.06.13 18:12:25,845
apsd[466]
Certificate not yet generated
Connecting from external, VPN fail:
21.06.13 18:10:52,533
racoon[226]
Connecting.
21.06.13 18:10:52,533
racoon[226]
IPSec Phase1 started (Initiated by peer).
21.06.13 18:10:52,535
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 1).
21.06.13 18:10:52,536
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 2).
21.06.13 18:10:52,692
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 3).
21.06.13 18:10:52,713
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 4).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
21.06.13 18:10:52,882
racoon[226]
IKE Packet: receive success. (Responder, Main-Mode message 5).
21.06.13 18:10:52,882
racoon[226]
IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
21.06.13 18:10:52,883
racoon[226]
IKE Packet: transmit success. (Responder, Main-Mode message 6).
21.06.13 18:10:52,883
racoon[226]
IPSec Phase1 established (Initiated by peer).
21.06.13 18:10:53,412
racoon[226]
Connecting.
21.06.13 18:10:53,413
racoon[226]
IPSec Phase2 started (Initiated by peer).
21.06.13 18:10:53,413
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 1).
21.06.13 18:10:53,414
racoon[226]
IKE Packet: transmit success. (Responder, Quick-Mode message 2).
21.06.13 18:10:53,531
racoon[226]
IKE Packet: receive success. (Responder, Quick-Mode message 3).
21.06.13 18:10:53,532
racoon[226]
IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
21.06.13 18:10:53,532
racoon[226]
IPSec Phase2 established (Initiated by peer).
21.06.13 18:11:13,643
racoon[226]
IKE Packet: receive success. (Information message).
21.06.13 18:11:13,671
racoon[226]
IKE Packet: receive success. (Information message).
Hope you see more than me and can help... :-( -
Non-Admin not being shown update button on XP
Non-Admin users on XP are not being shown the option to trigger an update.
The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
When a new update is available a link to the download page is shown in the About box rather than a button to start the update.That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.
-
Applet not loading in IE from Builder 904
SUMMARY
When I launch my Form from Builder the first time it works. Any subsequent launches from Builder do not work. Instead IE shows HTML in the browser window. The only way to get it to work again is to restart Builder.
If I change my default browser to Firefox this problem does not occur. (However I need to use IE as that is what the clients will use and there are differences in the layout.)
DETAILS
Environment:
Windows XP Pro
Forms Builder 904
IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158
JInitiator 1.3.1.17
Upon first run from Builder IE shows 'ORACLE FORMS' in the browser area. The Information Bar in IE says
'To help protect your security, Internet Explorer has restricted this file from showing active content that could access your computer. Click here for options...'
I click the Information Bar and select Allow Blocked Content. Then the Applet loads successfully.
On subsequent tries I do not get the Information Bar. And the following HTML appears in IE.
<html> <head> ORACLE FORMS.</head>
<body onload="document.pform.submit();" >
<form name="pform" action="http://GEN2TEK-LAP03.bullwip.com:8889/forms90/f90servlet" method="POST">
<input type="hidden" name="form" value="C:\formswork\mywork\Sandbox\TEXTIO_TEST.fmx">
<input type="hidden" name="userid" value="ORATORFORMS/ORATORFORMS@ORATOR_TEST.METALSAROANOKE.COM">
<input type="hidden" name="obr" value="yes">
<input type="hidden" name="array" value="YES">
</form> </body></html>
This problem occurs with any Form I've tried.
I've tried changing IE security settings to the most insecure settings (for both Internet and Intranet). This hasn't worked.
I've tried Disconnecting and Reconnecting within Builder but that doesn't work. Builder has to be restarted.
I've tried uninstalling JInitiator. After it reinstalls the same problem occurs.
-JeromeI've found a workaround that I can live with. I made a bookmark in IE to:
http://gen2tek-lap03.bullwip.com:8889/forms90/f90servlet?form=C:\formswork\mywork\Sandbox\TEXTIO_TEST.fmx&userid=SCOTT/[email protected]&obr=yes&array=yes
Then when I launch the Form from Builder and get the HTML I just click my Bookmark and it works. -
I am not being offered the option to save passwords
I am no longer being offered the option to save passwords. Auto password function does not seem to be working
== This happened ==
Every time Firefox openedDid you try what I suggested?
Also, see iTunes Store- About authorization and deauthorization.
Maybe you are looking for
-
[SOLVED] Xorg 1.16 updated and won't start with Nvidia driver
I tried updating to xorg 1.16 yesterday and after rebooting everything stopped after "[OK] Reached target Network." I was able to switch to a different terminal and downgrade to xorg 1.15 to boot again. I've seen https://www.archlinux.org/news/xorg-s
-
Sending Cheque as PDF attachment in Mail using F110.
Hi all, We have a requirement to send the cheque as as PDF attachment in Mail while printing it through transaction F110.Mail has to be triggered when the payment run is done through F110.Is there any config setting to do this without doing any chang
-
hi sir am using FCP 7 on Mac Pro. I Want export more than 2 hrs file like 2.30 min Movie. But my My FCP is allow only 2 hr video to export can u help me how can i do.
-
hi everyone , I have just installed the software of oracle on RHEL4U4,but when I click ok .and wanted to configure a new database . (using dbca) ,I met an error ,just as follows [oracle@LinuxOracle install]$ dbca bash: dbca: command not found so I lo
-
How to remove (or move) Here Maps
I'm short of space on my Lumia 535 since I downloaded a lot of maps. How can I remove some or all of them or move them onto the SD card? Thanks for your input. Solved! Go to Solution.